/* * CONFIGURATION MACRO DEFINITIONS for sparse matrix routines * * Author: Advising professor: * Kenneth S. Kundert Alberto Sangiovanni-Vincentelli * U.C. Berkeley * * This file contains macros for the sparse matrix routines that are used * to define the personality of the routines. The user is expected to * modify this file to maximize the performance of the routines with * his/her matrices. * * Macros are distinguished by using solely capital letters in their * identifiers. This contrasts with C defined identifiers which are * strictly lower case, and program variable and procedure names which use * both upper and lower case. */ /* * Revision and copyright information. * * Copyright (c) 1985,86,87,88 * by Kenneth S. Kundert and the University of California. * * Permission to use, copy, modify, and distribute this software and * its documentation for any purpose and without fee is hereby granted, * provided that the copyright notices appear in all copies and * supporting documentation and that the authors and the University of * California are properly credited. The authors and the University of * California make no representations as to the suitability of this * software for any purpose. It is provided `as is', without express * or implied warranty. * * $Date: 88/06/18 11:13:29 $ * $Revision: 1.2 $ */ #ifndef spCONFIG_DEFS #define spCONFIG_DEFS #ifdef spINSIDE_SPARSE /* * OPTIONS * * These are compiler options. Set each option to one to compile that * section of the code. If a feature is not desired, set the macro * to NO. Recommendations are given in brackets, [ignore them]. * * >>> Option descriptions: * Arithmetic Precision * The precision of the arithmetic used by Sparse can be set by * changing changing the spREAL macro. This macro is * contained in the file spMatrix.h. It is strongly suggested to * used double precision with circuit simulators. Note that * because C always performs arithmetic operations in double * precision, the only benefit to using single precision is that * less storage is required. There is often a noticeable speed * penalty when using single precision. Sparse internally refers * to a spREAL as a RealNumber. * REAL * This specifies that the routines are expected to handle real * systems of equations. The routines can be compiled to handle * both real and complex systems at the same time, but there is a * slight speed and memory advantage if the routines are complied * to handle only real systems of equations. * spCOMPLEX * This specifies that the routines will be complied to handle * complex systems of equations. * EXPANDABLE * Setting this compiler flag true (1) makes the matrix * expandable before it has been factored. If the matrix is * expandable, then if an element is added that would be * considered out of bounds in the current matrix, the size of * the matrix is increased to hold that element. As a result, * the size of the matrix need not be known before the matrix is * built. The matrix can be allocated with size zero and * expanded. * TRANSLATE * This option allows the set of external row and column numbers * to be non-packed. In other words, the row and column numbers * do not have to be contiguous. The priced paid for this * flexibility is that when TRANSLATE is set true, the time * required to initially build the matrix will be greater because * the external row and column number must be translated into * internal equivalents. This translation brings about other * benefits though. First, the spGetElement() and * spGetAdmittance() routines may be used after the matrix has * been factored. Further, elements, and even rows and columns, * may be added to the matrix, and row and columns may be deleted * from the matrix, after it has been factored. Note that when * the set of row and column number is not a packed set, neither * are the RHS and Solution vectors. Thus the size of these * vectors must be at least as large as the external size, which * is the value of the largest given row or column numbers. * INITIALIZE * Causes the spInitialize(), spGetInitInfo(), and * spInstallInitInfo() routines to be compiled. These routines * allow the user to store and read one pointer in each nonzero * element in the matrix. spInitialize() then calls a user * specified function for each structural nonzero in the matrix, * and includes this pointer as well as the external row and * column numbers as arguments. This allows the user to write * custom matrix initialization routines. * DIAGONAL_PIVOTING * Many matrices, and in particular node- and modified-node * admittance matrices, tend to be nearly symmetric and nearly * diagonally dominant. For these matrices, it is a good idea to * select pivots from the diagonal. With this option enabled, * this is exactly what happens, though if no satisfactory pivot * can be found on the diagonal, an off-diagonal pivot will be * used. If this option is disabled, Sparse does not * preferentially search the diagonal. Because of this, Sparse * has a wider variety of pivot candidates available, and so * presumably fewer fill-ins will be created. However, the * initial pivot selection process will take considerably longer. * If working with node admittance matrices, or other matrices * with a strong diagonal, it is probably best to use * DIAGONAL_PIVOTING for two reasons. First, accuracy will be * better because pivots will be chosen from the large diagonal * elements, thus reducing the chance of growth. Second, a near * optimal ordering will be chosen quickly. If the class of * matrices you are working with does not have a strong diagonal, * do not use DIAGONAL_PIVOTING, but consider using a larger * threshold. When DIAGONAL_PIVOTING is turned off, the following * options and constants are not used: MODIFIED_MARKOWITZ, * MAX_MARKOWITZ_TIES, and TIES_MULTIPLIER. * ARRAY_OFFSET * This determines whether arrays start at an index of zero or one. * This option is necessitated by the fact that standard C * convention dictates that arrays begin with an index of zero but * the standard mathematic convention states that arrays begin with * an index of one. So if you prefer to start your arrays with * zero, or your calling Sparse from FORTRAN, set ARRAY_OFFSET to * NO or 0. Otherwise, set ARRAY_OFFSET to YES or 1. Note that if * you use an offset of one, the arrays that you pass to Sparse * must have an allocated length of one plus the size of the * matrix. ARRAY_OFFSET must be either 0 or 1, no other offsets * are valid. * spSEPARATED_COMPLEX_VECTORS * This specifies the format for complex vectors. If this is set * false then a complex vector is made up of one double sized * array of RealNumber's in which the real and imaginary numbers * are placed in the alternately array in the array. In other * words, the first entry would be Complex[1].Real, then comes * Complex[1].Imag, then Complex[1].Real, etc. If * spSEPARATED_COMPLEX_VECTORS is set true, then each complex * vector is represented by two arrays of RealNumbers, one with * the real terms, the other with the imaginary. [NO] * MODIFIED_MARKOWITZ * This specifies that the modified Markowitz method of pivot * selection is to be used. The modified Markowitz method differs * from standard Markowitz in two ways. First, under modified * Markowitz, the search for a pivot can be terminated early if a * adequate (in terms of sparsity) pivot candidate is found. * Thus, when using modified Markowitz, the initial factorization * can be faster, but at the expense of a suboptimal pivoting * order that may slow subsequent factorizations. The second * difference is in the way modified Markowitz breaks Markowitz * ties. When two or more elements are pivot candidates and they * all have the same Markowitz product, then the tie is broken by * choosing the element that is best numerically. The numerically * best element is the one with the largest ratio of its magnitude * to the magnitude of the largest element in the same column, * excluding itself. The modified Markowitz method results in * marginally better accuracy. This option is most appropriate * for use when working with very large matrices where the initial * factor time represents an unacceptable burden. [NO] * DELETE * This specifies that the spDeleteRowAndCol() routine * should be compiled. Note that for this routine to be * compiled, both DELETE and TRANSLATE should be set true. * STRIP * This specifies that the spStripFills() routine should be compiled. * MODIFIED_NODAL * This specifies that the routine that preorders modified node * admittance matrices should be compiled. This routine results * in greater speed and accuracy if used with this type of * matrix. * QUAD_ELEMENT * This specifies that the routines that allow four related * elements to be entered into the matrix at once should be * compiled. These elements are usually related to an * admittance. The routines affected by QUAD_ELEMENT are the * spGetAdmittance, spGetQuad and spGetOnes routines. * TRANSPOSE * This specifies that the routines that solve the matrix as if * it was transposed should be compiled. These routines are * useful when performing sensitivity analysis using the adjoint * method. * SCALING * This specifies that the routine that performs scaling on the * matrix should be complied. Scaling is not strongly * supported. The routine to scale the matrix is provided, but * no routines are provided to scale and descale the RHS and * Solution vectors. It is suggested that if scaling is desired, * it only be preformed when the pivot order is being chosen [in * spOrderAndFactor()]. This is the only time scaling has * an effect. The scaling may then either be removed from the * solution by the user or the scaled factors may simply be * thrown away. [NO] * DOCUMENTATION * This specifies that routines that are used to document the * matrix, such as spPrint() and spFileMatrix(), should be * compiled. * DETERMINANT * This specifies that the routine spDeterminant() should be complied. * STABILITY * This specifies that spLargestElement() and spRoundoff() should * be compiled. These routines are used to check the stability (and * hence the quality of the pivoting) of the factorization by * computing a bound on the size of the element is the matrix E = * A - LU. If this bound is very high after applying * spOrderAndFactor(), then the pivot threshold should be raised. * If the bound increases greatly after using spFactor(), then the * matrix should probably be reordered. * CONDITION * This specifies that spCondition() and spNorm(), the code that * computes a good estimate of the condition number of the matrix, * should be compiled. * PSEUDOCONDITION * This specifies that spPseudoCondition(), the code that computes * a crude and easily fooled indicator of ill-conditioning in the * matrix, should be compiled. * MULTIPLICATION * This specifies that the routines to multiply the unfactored * matrix by a vector should be compiled. * FORTRAN * This specifies that the FORTRAN interface routines should be * compiled. When interfacing to FORTRAN programs, the ARRAY_OFFSET * options should be set to NO. * DEBUG * This specifies that additional error checking will be compiled. * The type of error checked are those that are common when the * matrix routines are first integrated into a user's program. Once * the routines have been integrated in and are running smoothly, this * option should be turned off. */ /* Begin options. */ #define REAL YES #define EXPANDABLE YES #define TRANSLATE YES #define INITIALIZE YES #define DIAGONAL_PIVOTING YES #define ARRAY_OFFSET NOT FORTRAN #define MODIFIED_MARKOWITZ NO #define DELETE YES #define STRIP YES #define MODIFIED_NODAL YES #define QUAD_ELEMENT YES #define TRANSPOSE YES #define SCALING YES #define DOCUMENTATION YES #define MULTIPLICATION YES #define DETERMINANT YES #define STABILITY YES #define CONDITION YES #define PSEUDOCONDITION YES #define FORTRAN NO #define DEBUG YES /* * The following options affect Sparse exports and so are exported as a * side effect. For this reason they use the `sp' prefix. The boolean * constants YES an NO are not defined in spMatrix.h to avoid conflicts * with user code, so use 0 for NO and 1 for YES. */ #endif /* spINSIDE_SPARSE */ #define spCOMPLEX 1 #define spSEPARATED_COMPLEX_VECTORS 0 #ifdef spINSIDE_SPARSE /* * MATRIX CONSTANTS * * These constants are used throughout the sparse matrix routines. They * should be set to suit the type of matrix being solved. Recommendations * are given in brackets. * * Some terminology should be defined. The Markowitz row count is the number * of non-zero elements in a row excluding the one being considered as pivot. * There is one Markowitz row count for every row. The Markowitz column * is defined similarly for columns. The Markowitz product for an element * is the product of its row and column counts. It is a measure of how much * work would be required on the next step of the factorization if that * element were chosen to be pivot. A small Markowitz product is desirable. * * >>> Constants descriptions: * DEFAULT_THRESHOLD * The relative threshold used if the user enters an invalid * threshold. Also the threshold used by spFactor() when * calling spOrderAndFactor(). The default threshold should * not be less than or equal to zero nor larger than one. [0.001] * DIAG_PIVOTING_AS_DEFAULT * This indicates whether spOrderAndFactor() should use diagonal * pivoting as default. This issue only arises when * spOrderAndFactor() is called from spFactor(). * SPACE_FOR_ELEMENTS * This number multiplied by the size of the matrix equals the number * of elements for which memory is initially allocated in * spCreate(). [6] * SPACE_FOR_FILL_INS * This number multiplied by the size of the matrix equals the number * of elements for which memory is initially allocated and specifically * reserved for fill-ins in spCreate(). [4] * ELEMENTS_PER_ALLOCATION * The number of matrix elements requested from the malloc utility on * each call to it. Setting this value greater than 1 reduces the * amount of overhead spent in this system call. On a virtual memory * machine, its good to allocate slightly less than a page worth of * elements at a time (or some multiple thereof). * [For the VAX, for real only use 41, otherwise use 31] * MINIMUM_ALLOCATED_SIZE * The minimum allocated size of a matrix. Note that this does not * limit the minimum size of a matrix. This just prevents having to * resize a matrix many times if the matrix is expandable, large and * allocated with an estimated size of zero. This number should not * be less than one. * EXPANSION_FACTOR * The amount the allocated size of the matrix is increased when it * is expanded. * MAX_MARKOWITZ_TIES * This number is used for two slightly different things, both of which * relate to the search for the best pivot. First, it is the maximum * number of elements that are Markowitz tied that will be sifted * through when trying to find the one that is numerically the best. * Second, it creates an upper bound on how large a Markowitz product * can be before it eliminates the possibility of early termination * of the pivot search. In other words, if the product of the smallest * Markowitz product yet found and TIES_MULTIPLIER is greater than * MAX_MARKOWITZ_TIES, then no early termination takes place. * Set MAX_MARKOWITZ_TIES to some small value if no early termination of * the pivot search is desired. An array of RealNumbers is allocated * of size MAX_MARKOWITZ_TIES so it must be positive and shouldn't * be too large. Active when MODIFIED_MARKOWITZ is 1 (true). [100] * TIES_MULTIPLIER * Specifies the number of Markowitz ties that are allowed to occur * before the search for the pivot is terminated early. Set to some * large value if no early termination of the pivot search is desired. * This number is multiplied times the Markowitz product to determine * how many ties are required for early termination. This means that * more elements will be searched before early termination if a large * number of fill-ins could be created by accepting what is currently * considered the best choice for the pivot. Active when * MODIFIED_MARKOWITZ is 1 (true). Setting this number to zero * effectively eliminates all pivoting, which should be avoided. * This number must be positive. TIES_MULTIPLIER is also used when * diagonal pivoting breaks down. [5] * DEFAULT_PARTITION * Which partition mode is used by spPartition() as default. * Possibilities include * spDIRECT_PARTITION -- each row used direct addressing, best for * a few relatively dense matrices. * spINDIRECT_PARTITION -- each row used indirect addressing, best * for a few very sparse matrices. * spAUTO_PARTITION -- direct or indirect addressing is chosen on * a row-by-row basis, carries a large overhead, but speeds up * both dense and sparse matrices, best if there is a large * number of matrices that can use the same ordering. */ /* Begin constants. */ #define DEFAULT_THRESHOLD 1.0e-3 #define DIAG_PIVOTING_AS_DEFAULT YES #define SPACE_FOR_ELEMENTS 6 #define SPACE_FOR_FILL_INS 4 #define ELEMENTS_PER_ALLOCATION 31 #define MINIMUM_ALLOCATED_SIZE 6 #define EXPANSION_FACTOR 1.5 #define MAX_MARKOWITZ_TIES 100 #define TIES_MULTIPLIER 5 #define DEFAULT_PARTITION spAUTO_PARTITION /* * PRINTER WIDTH * * This macro characterize the printer for the spPrint() routine. * * >>> Macros: * PRINTER_WIDTH * The number of characters per page width. Set to 80 for terminal, * 132 for line printer. */ /* Begin printer constants. */ #define PRINTER_WIDTH 80 /* * MACHINE CONSTANTS * * These numbers must be updated when the program is ported to a new machine. */ /* Begin machine constants. */ #ifdef notdef /* __STDC__ */ /* * This code is currently deleted because most ANSI standard C compilers * do not provide the standard header files yet. */ # include # include # define MACHINE_RESOLUTION DBL_EPSILON # define LARGEST_REAL DBL_MAX # define SMALLEST_REAL DBL_MIN # define LARGEST_SHORT_INTEGER SHRT_MAX # define LARGEST_LONG_INTEGER LONG_MAX #else /* NOT defined(__STDC__) */ /* VAX machine constants */ #ifdef vax # define MACHINE_RESOLUTION 6.93889e-18 # define LARGEST_REAL 1.70141e+38 # define SMALLEST_REAL 2.938743e-39 # define LARGEST_SHORT_INTEGER 32766 # define LARGEST_LONG_INTEGER 2147483646 #endif /* hp9000 machine constants */ #ifdef hpux /* These values are correct for hp9000/300. Should be correct for others. */ # define MACHINE_RESOLUTION 8.9e-15 # define LARGEST_REAL 1.79769313486231e+308 # define SMALLEST_REAL 2.22507385850721e-308 # define LARGEST_SHORT_INTEGER 32766 # define LARGEST_LONG_INTEGER 2147483646 #endif /* Sun machine constants */ #ifdef sun /* These values are rumored to be the correct values. */ # define MACHINE_RESOLUTION 8.9e-15 # define LARGEST_REAL 1.79769313486231e+308 # define SMALLEST_REAL 2.22507385850721e-308 # define LARGEST_SHORT_INTEGER 32766 # define LARGEST_LONG_INTEGER 2147483646 #endif #endif /* NOT defined(__STDC__) */ /* * ANNOTATION * * This macro changes the amount of annotation produced by the matrix * routines. The annotation is used as a debugging aid. Change the number * associated with ANNOTATE to change the amount of annotation produced by * the program. */ /* Begin annotation definitions. */ #define ANNOTATE NONE #define NONE 0 #define ON_STRANGE_BEHAVIOR 1 #define FULL 2 #endif /* spINSIDE_SPARSE */ #endif /* spCONFIG_DEFS */