* 1/6/92 * * This past year I have enhanced the LFK test program to automatically * increase sample run-timings in proportion to the cpu-clock resolution. * The poor resolution of ETIME in UNIX systems had required increasing * the run-time limit manually as the speed of workstations increased. * Now this LFK test will run dependably, hands-off. * * Frank McMahon * * C PROGRAM MFLOPS(TAPE6=OUTPUT) C LATEST KERNEL MODIFICATION DATE: 22/DEC/86 C LATEST FILE MODIFICATION DATE: 30/SEP/91 version mf523 C**************************************************************************** C MEASURES CPU PERFORMANCE RANGE OF THE COMPUTATION/COMPILER/COMPUTER COMPLEX C**************************************************************************** C * C L. L. N. L. F O R T R A N K E R N E L S T E S T: M F L O P S * C * C Our little systems have their day; * C They have their day and cease to be: * C They are but broken parts of Thee, * C And Thou, O Lord, are more than they. * C Alfred, Lord Tennyson (1850) * C * C * C These kernels measure Fortran numerical computation rates for a * C spectrum of CPU-limited computational structures. Mathematical * C through-put is measured in units of millions of floating-point * C operations executed per Second, called Mega-Flops/Sec. * C * C The experimental design of some traditional benchmark tests is * C defective when applied to computers employing vector or parallel * C processing because the range of cpu performance is 10 to 100 times * C the range of conventional, serial processors. In particular, the * C effective Cpu performance of supercomputers now ranges from a few * C megaflops to a few thousand megaflops. Attempts by some marketeers * C and decision makers to reduce this three orders of magnitude range * C of cpu performance to a single number is unscientific and has * C produced much confusion. The LFK test also has been abused by * C some analysts who quote only a single, average performance number. * C * C The Livermore Fortran Kernels (LFK) test contains a broad sample * C of generic Fortran computations which have been used to measure an * C effective numerical performance range, thus avoiding the peril of * C a single performance "rating". A complete report of 72 LFK test * C results must quote six performance range statistics(rates): the * C minimum, the harmonic, geometric, and arithmetic means, the * C maximum and the standard deviation. No single rate quotation is * C sufficient or honest. These measurements show a realistic * C variance in Fortran cpu performance that has stood the test of * C time and that is vital data for circumspect computer evaluations. * C Quote statistics from the SUMMARY table of 72 timings (DO Span= 167). * C * C This LFK test may be used as a standard performance test, as a test * C of compiler accuracy (checksums), or as a hardware endurance test. * C The LFK methodology is discussed in subroutine REPORT with references.* C The glossary and module hierarchy are documented in subroutine INDEX. * C * C Use of this program is granted with the request that a copy of the * C results be sent to the author at the address shown below, to be * C added to our studies of computer performance. Please send your * C complete LFK test output file on 5" DOS floppy-disk, or by E-mail. * C Your timing results may be held as proprietary data, if so marked. * C Otherwise your results will be quoted in published reports and will * C be disseminated through a publicly accessable computer network. * C Most computer vendors have run the LFK test(akas Livermore Loops test)* C and can provide LFK test results to prospective customers on request. * C * C * C F.H. McMahon L-35 * C Lawrence Livermore National Laboratory * C P.0. Box 808 * C Livermore, CA. 94550 * C * C (510) 422-1647 * C mcmahon@ocfmail.ocf.llnl.gov * C MCMAHON3@LLNL.GOV * C * C * C (C) Copyright 1983 the Regents of the * C University of California. All Rights Reserved. * C * C This work was produced under the sponsorship of * C the U.S. Department of Energy. The Government * C retains certain rights therein. * C**************************************************************************** C C C DIRECTIONS C C 1. We REQUIRE one test-run of the Fortran kernels as is, that is, with C no reprogramming. Standard product compiler directives may be used C for optimization as these do not constitute reprogramming. Use of C special compiler coding used only for specific LFK kernels is PROHIBITED. C We REQUIRE one mono-processed run (1 cpu) of this unaltered test. C C The performance of the standard, "as is" LFK test (no modifications) C correlates well with the performance of the majority of cpu-bound, C Fortran applications and hence of diverse workloads. These measured C correlations show the LFK to be a good sampling of the existing C inventory of Fortran coding practice in general. The extrema in C the Fortran inventory are represented from serial recurrences on C small arrays to global-parallel computation on large arrays. C C 2. In addition, the vendor may, if so desired, reprogram the kernels to C demonstrate high performance hardware features. Kernels 13,14,23 C are partially vectorisable and kernels 15,16,24 are vectorisable if C re-written. Kernels 5,6,11,17,19,20,23 are implicit computations that C must NOT be explicitly vectorised using compiler directives to C ignore dependencies. In any case, compiler listings of the codes C actually used should be returned along with the timing results. C C We permit the LFK kernels to be reprogrammed ONLY as a partial C demonstration of the performance of innovative, high performance C architectures. We may then infer from the reprogramming work C the kind and degree of optimisations which are necessary to achive C high performance as well as the cost in time and effort. C Only if it can be shown that this reprogramming can be automated C could we establish a correlation with the existing Fortran inventory. C These non-standard tests using the LFK samples are intended to explore C programming requirements and should not be correlated with standard C LFK test results (as in 1 above). C C 3. For vector processors, we REQUIRE an ALL-scalar compilation test-run C to measure the basic scalar performance range of the processor. C C 4. On computers where default single precision is REAL*4 we REQUIRE an C additional test-run with all mantissas.ge.47 . Declare all REAL*8 using: cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) c c To change REAL*4 (MFLOPS) to REAL*8 Double Precision: c c vi... :1,$s/cANSI/ /g c vi... :1,$s/ DOUBLE PRE/Cout DOUBLE PRE/g c ( some redundance in IQRANF,REPORT,RESULT,SEQDIG,TALLY,TRIAL,VALUES) c c To reverse REAL*8 (DPMFLOPS) to REAL*4 Single Precision: c c vi... :1,$s/ IMPLICIT DOUBLE PRE/cANSI IMPLICIT DOUBLE PRE/g c vi... :1,$s/Cout DOUBLE PRE/ DOUBLE PRE/g C C 5. Installation includes verifying or changing the following: C C First : the definition of function SECOND for CPU time only, and C Second: the definition of function MOD2N in KERNEL C Third : the system names Komput, Kontrl, and Kompil in MAIN. C During check-out run-time can be reduced by setting: Nruns= 1 in SIZES. C For Standard LFK Benchmark Test verify: Nruns= 7 in SIZES. C C 6. Each kernel's computation is check-summed for easy validation. C Your checksums should compare to the precision used, within round-off. C The number of correct, significant digits in your check-sums is printed C in the OK column next to each check-sum. Single precision should produce C 6 to 8 OK digits and double precision should produce 11 to 16 OK digits. C Try REAL*16 in subr SIGNEL and SUMO to improve accuracy of DP checksums. C C 7. Verify CPU Time measurements from function SECOND by comparing the clock C calibration printout of total CPU time with system or real-time measures. C The accuracy of SECOND is also tested using subr VERIFY and CALIBR. C Each kernel's execution may be repeated arbitrarily many times C (MULTI >> 100) without overflow and produce verifiable checksums. C C Default, uni-processor tests measure job Cpu-time in SECOND (TSS mode). C Parallel processing tests should measure Real-time in stand-alone mode. C C 8. On computers with Virtual Storage Systems assure a working-set space C larger than the entire program so that page faults are negligible, C because we must measure the CPU-limited computation rates. C IT IS ALSO NECESSARY to run this test stand-alone, i.e. NO timesharing. C In VS Systems a series of runs are needed to show stable CPU timings. C C 9. On computers with Cache memories and high resolution CPU clocks we C need, if feasible, another ALL-scalar test-run setting Loop= 1 C in SIZES to test un-primed cache (as well as encached) cpu rates. C Increase the size of array CACHE(in subr. VALUES) from 8192 to cache size. C C 10. On parallel computer systems which compile parallel Multi-tasking C at the Do-loop level (Micro-tasking) parallelisation of each C kernel is encouraged, but the number of processors used must be C reported. Parallelisation of, or invarient code hoisting outside of C the outermost, repetition loop around each kernel (including TEST) C is PROHIBITED. You may NOT declare NO-SIDE-EFFECTS function TEST. C C 11. A long endurance test can be set-up by redefining "laps" in SIZES. C C C C C C C C 12. Quote statistics from the SUMMARY table of 72 timings (DO Span= 167) C located near line 700+ in the output file and terminated with a banner>>> C C ******************************************** C THE LIVERMORE FORTRAN KERNELS: * SUMMARY * C ******************************************** C C Computer : CRAY Y-MP1 C System : UNICOS 5.1 C Compiler : CF77 4.0 C Date : 06/03/90 C . C . C . C MFLOPS RANGE: REPORT ALL RANGE STATISTICS: C Mean DO Span = 167 C Code Samples = 72 C C Maximum Rate = 294.34 Mega-Flops/Sec. C Quartile Q3 = 123.27 Mega-Flops/Sec. C Average Rate = 82.71 Mega-Flops/Sec. C Geometric Mean = 43.42 Mega-Flops/Sec. C Median Q2 = 31.14 Mega-Flops/Sec. C Harmonic Mean = 23.20 Mega-Flops/Sec. C Quartile Q1 = 17.16 Mega-Flops/Sec. C Minimum Rate = 2.74 Mega-Flops/Sec. C <<<<<<<<<<<<<<<<<<<<<<<<<<<*>>>>>>>>>>>>>>>>>>>>>>>>>>> C < BOTTOM-LINE: 72 SAMPLES LFK TEST RESULTS SUMMARY. > C < USE RANGE STATISTICS ABOVE FOR OFFICIAL QUOTATIONS. > C <<<<<<<<<<<<<<<<<<<<<<<<<<<*>>>>>>>>>>>>>>>>>>>>>>>>>>> C C Sadly some analysts quote only the long vector(DO span=471) LFK statistics C because they are the most impressive but they are not the best guide to C the performance of a large, diverse workload; the SUMMARY statistics are. C C A complete LFK perform-range report must include the minimum, the Harmonic C Geometric, and Arithmetic means, the maximum and the standard deviation. C The best central measure is the Geometric Mean(GM) of 72 rates because the C GM is less biased by outliers than the Harmonic(HM) or Arithemetic(AM). C CRAY hardware monitors have demonstrated that net Mflop rates for the C LLNL and UCSD tuned workloads are closest to the 72 LFK test GM rate. C C C CORRELATION OF LFK TEST PERFORMANCE MEANS WITH LARGE WORKLOAD TUNING C C ------- -------- ---------- ----------------------- C Type of CRAY-YMP1 Fraction Tuning of Workload C Mean (VL=167) Flops in Correlated with C (MFlops) Vector Ops LFK Mean Performance C ------- -------- ---------- ----------------------- C C 2*AM 165.0 .97 Best applications C C AM 82.7 .89 Optimized applications C C GM 43.4 .74 Tuned workload C C HM 23.2 .45 Untuned workload C C HM(scalar) 12.4 .0 All-scalar applications C ------- -------- ---------- ----------------------- C (AM,GM,HM stand for Arithmetic, Geometric, Harmonic Mean Rates) C C Interpretation of LFK performance rates is discussed in Subr REPORT and: C C F.H. McMahon, The Livermore Fortran Kernels: C A Computer Test Of The Numerical Performance Range, C Lawrence Livermore National Laboratory, C Livermore, California, UCRL-53745, December 1986. C C**************************************************************************** C C C C C DEVELOPMENT HISTORY OF THE LIVERMORE LOOPS TEST PROGRAM C C The first version of the LFK Test (a.k.a. the Livermore Loops, circa C 1970) consisting of 12 numerical Fortran kernels was developed C and enhanced by F.H. McMahon unless noted otherwise below. C The author is grateful for the constructive criticism of colleagues: C J.Owens, H.Nelson, L.Berdahl, D.Fuss, L.Sloan, T.Rudy, M.Seager. C Since mainframe computers in that era all provided cpu-timers C with micro-second time resolution, each kernal was executed just C once and timed with negligible experimental timing errors. C C In 1980 the number of Fortran samples was doubled to 24 kernels C to represent a broad range of computational structures that would C challenge a comiler's capability to generate optimal machine code. C C In 1983 the LFK test driver was extended to execute all 24 kernels C three times using three sets of DO loop limits (Avg: 18, 89, 468) C since parallel computer performace depends on scale or granularity. C These 72 sample statistics are more robust and definitive. C C In 1985 a repetition loop was placed around each kernel to execute C them long enough for accurate timing using the standard UNIX C timer ETIME which has a crude time resolution of 0.01 seconds. C C In 1986 the LFK test driver was extended to run the entire test C seven times so that experimental timing errors for each of the C 72 samples could be measured. Reports of these timing errors C are necessary for honest scientific experiments. See App. B, C: C C F.H.McMahon, The Livermore Fortran Kernels: C A Computer Test Of The Numerical Performance Range, C Lawrence Livermore National Laboratory, C Livermore, California, UCRL-53745, December 1986. C C In 1986 Greg Astfalk (AT&T) reprogrammed subroutine KERNEL containing C the 24 samples in the C language. This C module can then be linked C with the standard Fortran LFK Test driver-program for testing under C identical benchmark conditions as the Fortran samples benchmark. C This C module was refined at LLNL by K.O'Hair, C.Rasbold, and M.Seager. C C In 1990 the repetition loops around each kernel were modified C following reports of some code-hoisting by global optimization. C These repetition loops were submerged into function TEST beyond C the scope of optimizers so the 72 samples are now bullet-proof. C New, highly accurate, convergent methods to measure overhead time C were implemented ( in VERIFY, SECOVT, TICK ). C C In 1991 the LFK test runtime control MULTI was increased twenty fold C for accurate timing when crude UNIX timers having poor time resolution C (Tmin= 0.01 sec) were used on very fast computers. This was only a C temporary fix since under UNIX each kernel must always be run C at least 1 sec for 1% accuracy despite ever increasing cpu speeds. C Thus new algorithms were implemented that automatically determine C appropriate values for MULTI which are sufficiently large for C accurate timing of the kernels in any system. A new method C of repetition is used that allows MULTI to be increased indefinately C (MULTI >> 100) in future without causing overflow and still compute C verifiable checksums. New checksums were generated using IEEE 754 C standard floating-point hardware on SUN, SGI, and HP workstations. C Operational accuracy of the test program is assured in future. C C**************************************************************************** C C C C C/ PARAMETER( kn= 47, kn2= 95, np= 3, ls= 3*47, krs= 24) C/ PARAMETER( nk= 47, nl= 3, nr= 8 ) parameter( ntimes= 18 ) C CHARACTER Komput*24, Kontrl*24, Kompil*24, Kalend*24, Identy*24 COMMON /SYSID/ Komput, Kontrl, Kompil, Kalend, Identy C COMMON /ALPHA/ mk,ik,im,ml,il,Mruns,Nruns,jr,iovec,NPFS(8,3,47) COMMON /ORDER/ inseq, match, NSTACK(20), isave, iret COMMON /TAU/ tclock, tsecov, testov, cumtim(4) DIMENSION FLOPS(141), TR(141), RATES(141), ID(141) DIMENSION LSPAN(141), WG(141), OSUM (141), TERR(141), TK(6) CLOX REAL*8 SECOND CLLNL CALL DROPFILE ( '+MFLOPS' ) c Job start Cpu time cumtim(1)= 0.0d0 ti= SECOND( cumtim(1)) C c Define your computer system: Komput = 'CRAY-YMP (6.0ns) ' Kontrl = 'UNICOS fully loaded ' Kompil = 'CFT77 4.0.3.4 ' Kalend = '91.07.14 ' Identy = 'Frank McMahon, LLNL ' c c Initialize variables and Open Files CALL INDATA( TK, iou) c Record name in active linkage chain in COMMON /DEBUG/ CALL TRACE (' MAIN. ') c c Verify Sufficient Loop Size Versus Cpu Clock Accuracy CALL VERIFY( iou ) tj= SECOND( cumtim(1)) nt= ntimes c Define control limits: Nruns(runs), Loop(time) CALL SIZES(-1) c c Run test Mruns times Cpu-limited; I/O is deferred: DO 2 k= 1,Mruns i= k jr= MOD( i-1,7) + 1 CALL IQRAN0( 256) c Run test using one of 3 sets of DO-Loop spans: c Set iou Negative to supress all I/O during Cpu timing. DO 1 j= im,ml il= j tock= TICK( -iou, nt) c CALL KERNEL( TK) 1 continue CALL TRIAL( iou, i, ti, tj) 2 continue c c Report timing errors, Mflops statistics: DO 3 j= im,ml il= j CALL RESULT( iou,FLOPS,TR,RATES,LSPAN,WG,OSUM,TERR,ID) c c Report Mflops for Vector Cpus( short, medium, long vectors): c iovec= 0 IF( iovec.EQ.1 ) THEN CALL REPORT( iou, mk,mk,FLOPS,TR,RATES,LSPAN,WG,OSUM,ID) ENDIF 3 continue c Report Mflops SUMMARY Statistics: for Official Quotations c CALL REPORT( iou,3*mk,mk,FLOPS,TR,RATES,LSPAN,WG,OSUM,ID) c cumtim(1)= 0.0d0 totjob= SECOND( cumtim(1)) - ti - tsecov WRITE( iou,9) inseq, totjob, TK(1), TK(2) WRITE( *,9) inseq, totjob, TK(1), TK(2) 9 FORMAT( 1H1,//,27H Version: 22/DEC/86 mf523 ,2X,I12,/,1P, . 35H CHECK FOR CLOCK CALIBRATION ONLY: ,/, . 26H Total Job Cpu Time = ,e14.5, 5H Sec.,/, . 26H Total 24 Kernels Time = ,e14.5, 5H Sec.,/, . 26H Total 24 Kernels Flops= ,e14.5, 6H Flops) C C Optional Cpu Clock Calibration Test of SECOND: c CALL CALIBR STOP END c*********************************************** BLOCK DATA C*********************************************** C cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) DOUBLE PRECISION SUMS REDUNDNT C C l1 := param-dimension governs the size of most 1-d arrays C l2 := param-dimension governs the size of most 2-d arrays C C ISPAN := Array of limits for DO loop control in the kernels C IPASS := Array of limits for multiple pass execution of each kernel C FLOPN := Array of floating-point operation counts for one pass thru kernel C WT := Array of weights to average kernel execution rates. C SKALE := Array of scale factors for SIGNEL data generator. C BIAS := Array of scale factors for SIGNEL data generator. C C MUL := Array of multipliers * FLOPN for each pass C WTP := Array of multipliers * WT for each pass C FR := Array of vectorisation fractions in REPORT C SUMW := Array of quartile weights in REPORT C IQ := Array of workload weights in REPORT C SUMS := Array of Verified Checksums of Kernels results: Nruns= 1 and 7. C C/ PARAMETER( l1= 1001, l2= 101, l1d= 2*1001 ) C/ PARAMETER( l13= 64, l13h= l13/2, l213= l13+l13h, l813= 8*l13 ) C/ PARAMETER( l14=2048, l16= 75, l416= 4*l16 , l21= 25 ) C C/ PARAMETER( l1= 27, l2= 15, l1d= 2*1001 ) C/ PARAMETER( l13= 8, l13h= 8/2, l213= 8+4, l813= 8*8 ) C/ PARAMETER( l14= 16, l16= 15, l416= 4*15 , l21= 15) C C C/ PARAMETER( l1= 1001, l2= 101, l1d= 2*1001 ) C/ PARAMETER( l13= 64, l13h= 64/2, l213= 64+32, l813= 8*64 ) C/ PARAMETER( l14= 2048, l16= 75, l416= 4*75 , l21= 25) C C/ PARAMETER( kn= 47, kn2= 95, np= 3, ls= 3*47, krs= 24) C/ PARAMETER( m1= 1001-1, m2= 101-1, m7= 1001-6 ) parameter( nsys= 5, ns= nsys+1, nd= 11, nt= 4 ) C COMMON /SPACES/ ion,j5,k2,k3,MULTI,laps,Loop,m,kr,LP,n13h,ibuf,nx, 1 L,npass,nfail,n,n1,n2,n13,n213,n813,n14,n16,n416,n21,nt1,nt2, 2 last,idebug,mpy,Loops2,mucho,mpylim, intbuf(16) C COMMON /SPACE0/ TIME(47), CSUM(47), WW(47), WT(47), ticks, 1 FR(9), TERR1(47), SUMW(7), START, 2 SKALE(47), BIAS(47), WS(95), TOTAL(47), FLOPN(47), 3 IQ(7), NPF, NPFS1(47) C CHARACTER NAMES*8 COMMON /TAGS/ NAMES(nd,nt) COMMON /RATS/ RATED(nd,nt) COMMON /SPACEI/ WTP(3), MUL(3), ISPAN(47,3), IPASS(47,3) C COMMON /ORDER/ inseq, match, NSTACK(20), isave, iret C COMMON /PROOF/ SUMS(24,3,8) C **************************************************************** C DATA ( ISPAN(i,1), i= 1,47) / : 1001, 101, 1001, 1001, 1001, 64, 995, 100, : 101, 101, 1001, 1000, 64, 1001, 101, 75, : 101, 100, 101, 1000, 101, 101, 100, 1001, 23*0/ C C* : l1, l2, l1, l1, l1, l13, m7, m2, C* : l2, l2, l1, m1, l13, l1, l2, l16, C* : l2, m2, l2, m1, l21, l2, m2, l1, 23*0/ C DATA ( ISPAN(i,2), i= 1,47) / : 101, 101, 101, 101, 101, 32, 101, 100, : 101, 101, 101, 100, 32, 101, 101, 40, : 101, 100, 101, 100, 50, 101, 100, 101, 23*0/ C DATA ( ISPAN(i,3), i= 1,47) / : 27, 15, 27, 27, 27, 8, 21, 14, : 15, 15, 27, 26, 8, 27, 15, 15, : 15, 14, 15, 26, 20, 15, 14, 27, 23*0/ C DATA ( IPASS(i,1), i= 1,47) / : 7, 67, 9, 14, 10, 3, 4, 10, 36, 34, 11, 12, : 36, 2, 1, 25, 35, 2, 39, 1, 1, 11, 8, 5, 23*0/ C DATA ( IPASS(i,2), i= 1,47) / : 40, 40, 53, 70, 55, 7, 22, 6, 21, 19, 64, 68, : 41, 10, 1, 27, 20, 1, 23, 8, 1, 7, 5, 31, 23*0/ C DATA ( IPASS(i,3), i= 1,47) / : 28, 46, 37, 38, 40, 21, 20, 9, 26, 25, 46, 48, : 31, 8, 1, 14, 26, 2, 28, 7, 1, 8, 7, 23, 23*0/ C DATA ( MUL(i), i= 1,3) / 1, 2, 8 / DATA ( WTP(i), i= 1,3) / 1.0, 2.0, 1.0 / c c The following flop-counts (FLOPN) are required for scalar or serial c execution. The scalar version defines the NECESSARY computation c generally, in the absence of proof to the contrary. The vector c or parallel executions are only credited with executing the same c necessary computation. If the parallel methods do more computation c than is necessary then the extra flops are not counted as through-put. c DATA ( FLOPN(i), i= 1,47) : /5., 4., 2., 2., 2., 2., 16., 36., 17., 9., 1., 1., : 7., 11., 33.,10., 9., 44., 6., 26., 2., 17., 11., 1., 23*0.0/ C DATA ( WT(i), i= 1,47) / : 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, : 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, : 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 23*0.0/ C C DATA ( SKALE(i), i= 1,47) / & 0.100D+0, 0.100D+0, 0.100D+0, 0.100D+0, 0.100D+0, 0.100D+0, & 0.100D+0, 0.100D+0, 0.100D+0, 0.100D+0, 0.100D+0, 0.100D+0, & 0.100D+0, 0.100D+0, 0.100D+0, 0.100D+0, 0.100D+0, 0.100D+0, & 0.100D+0, 0.100D+0, 0.100D+0, 0.100D+0, 0.100D+0, 0.100D+0, & 23*0.000D+0 / C c : 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, c : 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, c : 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 23*0.0/ C DATA ( BIAS(i), i= 1,47) / : 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, : 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, : 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 23*0.0/ C DATA ( FR(i), i= 1,9) / : 0.0, 0.2, 0.4, 0.6, 0.7, 0.8, 0.9, 0.95, 1.0/ C DATA ( SUMW(i), i= 1,7) / : 1.0, 0.95, 0.9, 0.8, 0.7, 0.6, 0.5/ C DATA ( IQ(i), i= 1,7) / : 1, 2, 1, 2, 1, 2, 1/ C C C NEC SX-3/14 DATA ( NAMES(1,i), i= 1,3) / : 'NEC ', 'SX-3/14 ', 'F77v.012' / C DATA ( RATED(1,i), i= 1,4) / : 311.82, 95.59, 38.73, 499.78 / C CRAY-YMP/1 DATA ( NAMES(2,i), i= 1,3) / : 'CRAY ', 'YMP/1 ', 'CFT771.2' / C DATA ( RATED(2,i), i= 1,4) / : 78.23, 36.63, 17.66, 86.75 / C IBM 3090S180 c DATA ( NAMES(2,i), i= 1,3) / c : 'IBM ', '3090s180', 'VSF2.2.0' / C c DATA ( RATED(2,i), i= 1,4) / c : 17.56, 12.23, 9.02, 16.32 / C HP 9000/730 DATA ( NAMES(3,i), i= 1,3) / : 'HP ', '9000/730', 'f77 8.05' / C DATA ( RATED(3,i), i= 1,4) / : 18.31, 15.72, 13.28, 9.68 / C IBM 6000/540 DATA ( NAMES(4,i), i= 1,3) / : 'IBM ', '6000/540', 'XL v0.90' / C DATA ( RATED(4,i), i= 1,4) / : 14.17, 10.73, 7.45, 9.59 / C COMPAQ i486/25 DATA ( NAMES(5,i), i= 1,3) / : 'COMPAQ ', 'i486/25 ', ' ' / C DATA ( RATED(5,i), i= 1,4) / : 1.15, 1.05, 0.92, 0.48 / C C DATA START /0.0/, NPF/0/, ibuf/0/, match/0/, MULTI/200/, laps/1/ DATA npass/0/, nfail/0/, last/-1/ C c MULTI= 200 c DATA ( SUMS(i,1,5), i= 1,24 ) / &5.114652693224671D+04,1.539721811668385D+03,1.000742883066363D+01, &5.999250595473891D-01,4.548871642387267D+03,4.375116344729986D+03, &6.104251075174761D+04,1.501268005625798D+05,1.189443609974981D+05, &7.310369784325296D+04,3.342910972650109D+07,2.907141294167248D-05, &1.202533961842803D+11,3.165553044000334D+09,3.943816690352042D+04, &5.650760000000000D+05,1.114641772902486D+03,1.015727037502300D+05, &5.421816960147207D+02,3.040644339351239D+07,1.597308280710199D+08, &2.938604376566697D+02,3.549900501563623D+04,5.000000000000000D+02/ c DATA ( SUMS(i,2,5), i= 1,24 ) / &5.253344778937972D+02,1.539721811668385D+03,1.009741436578952D+00, &5.999250595473891D-01,4.589031939600982D+01,8.631675645333210D+01, &6.345586315784055D+02,1.501268005625798D+05,1.189443609974981D+05, &7.310369784325296D+04,3.433560407475758D+04,7.127569130821465D-06, &9.816387810944345D+10,3.039983465145393D+07,3.943816690352042D+04, &6.480410000000000D+05,1.114641772902486D+03,1.015727037502300D+05, &5.421816960147207D+02,3.126205178815431D+04,7.824524877232093D+07, &2.938604376566697D+02,3.549900501563623D+04,5.000000000000000D+01/ c DATA ( SUMS(i,3,5), i= 1,24 ) / &3.855104502494961D+01,3.953296986903059D+01,2.699309089320672D-01, &5.999250595473891D-01,3.182615248447483D+00,1.120309393467088D+00, &2.845720217644024D+01,2.960543667875003D+03,2.623968460874250D+03, &1.651291227698265D+03,6.551161335845770D+02,1.943435981130448D-06, &3.847124199949426D+10,2.923540598672011D+06,1.108997288134785D+03, &5.152160000000000D+05,2.947368618589360D+01,9.700646212337040D+02, &1.268230698051003D+01,5.987713249475302D+02,5.009945671204667D+07, &6.109968728263972D+00,4.850340602749970D+02,1.300000000000000D+01/ C c MULTI= 100 c DATA ( SUMS(i,1,4), i= 1,24 ) / &5.114652693224671D+04,1.539721811668385D+03,1.000742883066363D+01, &5.999250595473891D-01,4.548871642387267D+03,4.375116344729986D+03, &6.104251075174761D+04,1.501268005625798D+05,1.189443609974981D+05, &7.310369784325296D+04,3.342910972650109D+07,2.907141294167248D-05, &4.958101723583047D+10,3.165278275112100D+09,3.943816690352042D+04, &2.825760000000000D+05,1.114641772902486D+03,7.507386432940455D+04, &5.421816960147207D+02,3.040644339351239D+07,8.002484742089500D+07, &2.938604376566697D+02,3.549900501563623D+04,5.000000000000000D+02/ c DATA ( SUMS(i,2,4), i= 1,24 ) / &5.253344778937972D+02,1.539721811668385D+03,1.009741436578952D+00, &5.999250595473891D-01,4.589031939600982D+01,8.631675645333210D+01, &6.345586315784055D+02,1.501268005625798D+05,1.189443609974981D+05, &7.310369784325296D+04,3.433560407475758D+04,7.127569130821465D-06, &3.542728632259964D+10,3.015943681556781D+07,3.943816690352042D+04, &3.240410000000000D+05,1.114641772902486D+03,7.507386432940455D+04, &5.421816960147207D+02,3.126205178815431D+04,3.916171317449981D+07, &2.938604376566697D+02,3.549900501563623D+04,5.000000000000000D+01/ c DATA ( SUMS(i,3,4), i= 1,24 ) / &3.855104502494961D+01,3.953296986903059D+01,2.699309089320672D-01, &5.999250595473891D-01,3.182615248447483D+00,1.120309393467088D+00, &2.845720217644024D+01,2.960543667875003D+03,2.623968460874250D+03, &1.651291227698265D+03,6.551161335845770D+02,1.943435981130448D-06, &1.161063924078402D+10,2.609194549277411D+06,1.108997288134785D+03, &2.576160000000000D+05,2.947368618589360D+01,9.700646212337040D+02, &1.268230698051003D+01,5.987713249475302D+02,2.505599006414913D+07, &6.109968728263972D+00,4.850340602749970D+02,1.300000000000000D+01/ C c MULTI= 50 c DATA ( SUMS(i,1,3), i= 1,24 ) / &5.114652693224671D+04,1.539721811668385D+03,1.000742883066363D+01, &5.999250595473891D-01,4.548871642387267D+03,4.375116344729986D+03, &6.104251075174761D+04,1.501268005625798D+05,1.189443609974981D+05, &7.310369784325296D+04,3.342910972650109D+07,2.907141294167248D-05, &2.217514090251080D+10,3.165140890667983D+09,3.943816690352042D+04, &1.413260000000000D+05,1.114641772902486D+03,6.203834985242972D+04, &5.421816960147207D+02,3.040644339351239D+07,4.017185709583275D+07, &2.938604376566697D+02,3.549900501563623D+04,5.000000000000000D+02/ c DATA ( SUMS(i,2,3), i= 1,24 ) / &5.253344778937972D+02,1.539721811668385D+03,1.009741436578952D+00, &5.999250595473891D-01,4.589031939600982D+01,8.631675645333210D+01, &6.345586315784055D+02,1.501268005625798D+05,1.189443609974981D+05, &7.310369784325296D+04,3.433560407475758D+04,7.127569130821465D-06, &1.430504282675192D+10,3.003923789762475D+07,3.943816690352042D+04, &1.620410000000000D+05,1.114641772902486D+03,6.203834985242972D+04, &5.421816960147207D+02,3.126205178815431D+04,1.961994537558922D+07, &2.938604376566697D+02,3.549900501563623D+04,5.000000000000000D+01/ c DATA ( SUMS(i,3,3), i= 1,24 ) / &3.855104502494961D+01,3.953296986903059D+01,2.699309089320672D-01, &5.999250595473891D-01,3.182615248447483D+00,1.120309393467088D+00, &2.845720217644024D+01,2.960543667875003D+03,2.623968460874250D+03, &1.651291227698265D+03,6.551161335845770D+02,1.943435981130448D-06, &3.899370197966012D+09,2.452021524580127D+06,1.108997288134785D+03, &1.288160000000000D+05,2.947368618589360D+01,9.700646212337040D+02, &1.268230698051003D+01,5.987713249475302D+02,1.253425674020030D+07, &6.109968728263972D+00,4.850340602749970D+02,1.300000000000000D+01/ C c c MULTI= 10 Old Checksums used before 1991 (longer run-times were needed) c DATA ( SUMS(i,1,2), i= 1,24 ) / &5.114652693224671D+04,1.539721811668385D+03,1.000742883066363D+01, &5.999250595473891D-01,4.548871642387267D+03,4.375116344729986D+03, &6.104251075174761D+04,1.501268005625798D+05,1.189443609974981D+05, &7.310369784325296D+04,3.342910972650109D+07,2.907141294167248D-05, &4.057110454105199D+09,3.165030983112689D+09,3.943816690352042D+04, &2.832600000000000D+04,1.114641772902486D+03,5.165625410754861D+04, &5.421816960147207D+02,3.040644339351239D+07,8.289464835782872D+06, &2.938604376566697D+02,3.549834542443621D+04,5.000000000000000D+02/ c DATA ( SUMS(i,2,2), i= 1,24 ) / &5.253344778937972D+02,1.539721811668385D+03,1.009741436578952D+00, &5.999250595473891D-01,4.589031939600982D+01,8.631675645333210D+01, &6.345586315784055D+02,1.501268005625798D+05,1.189443609974981D+05, &7.310369784325296D+04,3.433560407475758D+04,7.127569130821465D-06, &2.325318944820753D+09,2.994307876327030D+07,3.943816690352042D+04, &3.244100000000000D+04,1.114641772902486D+03,5.165625410754861D+04, &5.421816960147207D+02,3.126205178815431D+04,3.986531136460764D+06, &2.938604376566697D+02,3.549894609774404D+04,5.000000000000000D+01/ c DATA ( SUMS(i,3,2), i= 1,24 ) / &3.855104502494961D+01,3.953296986903059D+01,2.699309089320672D-01, &5.999250595473891D-01,3.182615248447483D+00,1.120309393467088D+00, &2.845720217644024D+01,2.960543667875003D+03,2.623968460874250D+03, &1.651291227698265D+03,6.551161335845770D+02,1.943435981130448D-06, &4.755211251524082D+08,2.326283104822299D+06,1.108997288134785D+03, &2.577600000000000D+04,2.947368618589360D+01,9.700646212337040D+02, &1.268230698051003D+01,5.987713249475302D+02,2.516870081041265D+06, &6.109968728263972D+00,4.850340602749970D+02,1.300000000000000D+01/ c c MULTI= 1 Old Checksums used before 1986 (longer run-times were needed) c DATA ( SUMS(i,1,1), i= 1,24 ) / &5.114652693224671D+04,1.539721811668385D+03,1.000742883066363D+01, &5.999250595473891D-01,4.548871642387267D+03,4.375116344729986D+03, &6.104251075174761D+04,1.501268005625798D+05,1.189443609974981D+05, &7.310369784325296D+04,3.342910972650109D+07,2.907141294167248D-05, &4.468741170140841D+08,3.165006253912748D+09,3.943816690352042D+04, &2.901000000000000D+03,1.227055736845479D+03,4.932243865816480D+04, &5.421816960147207D+02,3.040644339351239D+07,1.115926577271652D+06, &2.938604376566697D+02,3.138872788135057D+04,5.000000000000000D+02/ c DATA ( SUMS(i,2,1), i= 1,24 ) / &5.253344778937972D+02,1.539721811668385D+03,1.009741436578952D+00, &5.999250595473891D-01,4.589031939600982D+01,8.631675645333210D+01, &6.345586315784055D+02,1.501268005625798D+05,1.189443609974981D+05, &7.310369784325296D+04,3.433560407475758D+04,7.127569130821465D-06, &2.323352389500009D+08,2.992144295804055D+07,3.943816690352042D+04, &3.281000000000000D+03,1.114641772902486D+03,4.932243865816480D+04, &5.421816960147207D+02,3.126205178815431D+04,4.690129326568575D+05, &2.938604376566697D+02,3.228104575530876D+04,5.000000000000000D+01/ c DATA ( SUMS(i,3,1), i= 1,24 ) / &3.855104502494961D+01,3.953296986903059D+01,2.699309089320672D-01, &5.999250595473891D-01,3.182615248447483D+00,1.120309393467088D+00, &2.845720217644024D+01,2.960543667875003D+03,2.623968460874250D+03, &1.651291227698265D+03,6.551161335845770D+02,1.943435981130448D-06, &4.143805389489125D+07,2.297991960376787D+06,1.108997288134785D+03, &2.592000000000000D+03,2.947368618589360D+01,9.700646212337040D+02, &1.268230698051003D+01,5.987713249475302D+02,2.629580827304779D+05, &6.109968728263972D+00,4.850340602749970D+02,1.300000000000000D+01/ C C**************************************************************************** c c The following DP checksums are NOT used for the standard LFK c performance test but may be used to test Fortran compiler precision. c c Checksums for Quadruple-Precision (IBM,DEC); or CRAY Double-Precision. c Quadruple precision checksums computed by Dr. D.S. Lindsay, HITACHI. C These Checksums were obtained with MULTI= 10. (BLOCKDATA) c Change the numerical edit descriptor Q to D on CRAY systems. CQc CQ DATA ( SUMS(i,1,1), i= 1,24 ) / CQ a 0.5114652693224705102247326Q+05, 0.5150345372943066022569677Q+03, CQ b 0.1000742883066623145122027Q+02, 0.5999250595474070357564935Q+00, CQ c 0.4548871642388544199267412Q+04, 0.5229095383954675635496207Q+13, CQ d 0.6104251075163778121943921Q+05, 0.1501268005627157186827043Q+06, CQ e 0.1189443609975085966254160Q+06, 0.7310369784325972183233686Q+05, CQ f 0.3342910972650530676553892Q+08, 0.2907141428639174056565229Q-04, CQ g 0.4057110454105263471505061Q+10, 0.2982036205992255154832180Q+10, CQ h 0.3943816690352311804312052Q+05, 0.2832600000000000000000000Q+05, CQ i 0.1114641772903091760464680Q+04, 0.5165625410757306606559174Q+05, CQ j 0.5421816960150398899460410Q+03, 0.3040644339317275409518862Q+08, CQ k 0.8289464835786202431495974Q+07, 0.2938604376567099667790619Q+03, CQ l 0.3549834542446150511553453Q+05, 0.5000000000000000000000000Q+03/ CQc CQ DATA ( SUMS(i,2,1), i= 1,24 ) / CQ a 0.5253344778938000681994399Q+03, 0.5150345372943066022569677Q+03, CQ b 0.1009741436579188086885138Q+01, 0.5999250595474070357564935Q+00, CQ c 0.4589031939602131581035992Q+02, 0.2693280957416549457193910Q+16, CQ d 0.6345586315772524401198340Q+03, 0.1501268005627157186827043Q+06, CQ e 0.1189443609975085966254160Q+06, 0.7310369784325972183233686Q+05, CQ f 0.3433560407476162346605343Q+05, 0.7127569144561925151361427Q-05, CQ g 0.2325318944820836005421577Q+10, 0.3045676741897511424188763Q+08, CQ h 0.3943816690352311804312052Q+05, 0.3244100000000000000000000Q+05, CQ i 0.1114641772903091760464680Q+04, 0.5165625410757306606559174Q+05, CQ j 0.5421816960150398899460410Q+03, 0.3126205178811007613028089Q+05, CQ k 0.3986531136462291709063170Q+07, 0.2938604376567099667790619Q+03, CQ l 0.3549894609776936556634240Q+05, 0.5000000000000000000000000Q+02/ CQc CQ DATA ( SUMS(i,3,1), i= 1,24 ) / CQ a 0.3855104502494983491740258Q+02, 0.1199847611437483513040755Q+02, CQ b 0.2699309089321296439173090Q+00, 0.5999250595474070357564935Q+00, CQ c 0.3182615248448271678796560Q+01, 0.8303480073326955433087865Q+12, CQ d 0.2845720217638848365786224Q+02, 0.2960543667877649943946702Q+04, CQ e 0.2623968460874419268457298Q+04, 0.1651291227698377392796690Q+04, CQ f 0.6551161335846537217862474Q+03, 0.1943435981776804808483341Q-05, CQ g 0.4755211251524563699634913Q+09, 0.2547733008933910800455698Q+07, CQ h 0.1108997288135066584075059Q+04, 0.2577600000000000000000000Q+05, CQ i 0.2947368618590713935189324Q+02, 0.9700646212341513210532085Q+03, CQ j 0.1268230698051747067958265Q+02, 0.5987713249471801461035250Q+03, CQ k 0.2516870081042209239664473Q+07, 0.6109968728264795136407718Q+01, CQ l 0.4850340602751675804605762Q+03, 0.1300000000000000000000000Q+02/ CQc END C C C*************************************** SUBROUTINE CALIBR C*********************************************************************** C * c CALIBR - Cpu clock calibration tests accuracy of SECOND function.* C * C CALIBR tests function SECOND by using it to time a computation * C repeatedly. These SECOND timings are written to stdout(terminal)* C one at a time as the cpu-clock is read, so we can observe a real * C external clock time and thus check the accuracy of SECOND code. * C Comparisons with an external clock require a stand-alone run. * C Otherwise compare with system charge for total job cpu time. * C * C Sample Output from CRAY-YMP1: * C * C * C CPU CLOCK CALIBRATION: START STOPWATCH NOW ! * C TESTS ACCURACY OF FUNCTION SECOND() * C Monoprocess this test, stand-alone, no TSS * C Verify T or DT observe external clock: * C * C ------- ------- ------ ----- * C Total T ? Delta T ? Mflops ? Flops * C ------- ------- ------ ----- * C 1 0.00 0.00 9.15 4.00000e+04 4.98000e-02 * C 2 0.01 0.01 11.67 1.20000e+05 8.98000e-02 * C 3 0.02 0.01 12.84 2.80000e+05 1.69800e-01 * C 4 0.04 0.02 13.47 6.00000e+05 3.29800e-01 * C 5 0.09 0.05 13.81 1.24000e+06 6.49800e-01 * C 6 0.18 0.09 14.00 2.52000e+06 1.28980e+00 * C 7 0.36 0.18 14.12 5.08000e+06 2.56980e+00 * C 8 0.72 0.36 14.19 1.02000e+07 5.12980e+00 * C 9 1.44 0.72 14.20 2.04400e+07 1.02498e+01 * C 10 2.88 1.44 14.23 4.09200e+07 2.04898e+01 * C 11 5.74 2.87 14.27 8.18800e+07 4.09698e+01 * C 12 11.48 5.74 14.27 1.63800e+08 8.19298e+01 * C 13 22.98 11.50 14.26 3.27640e+08 1.63850e+02 * C 14 45.92 22.94 14.27 6.55320e+08 3.27690e+02 * C 15 91.88 45.96 14.26 1.31068e+09 6.55369e+02 * C*********************************************************************** cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) C parameter( limitn= 101, ndim= limitn+10 ) DIMENSION X(ndim), Y(ndim), cumtim(10) C c CALL TRACE ('CALIBR ') cumtim(1)= 0.0d0 t0= SECOND( cumtim(1)) C WRITE( *,111) WRITE( *,110) WRITE( *,112) WRITE( *,113) WRITE( *,114) WRITE( *,115) WRITE( *,114) 111 FORMAT(//,' CPU CLOCK CALIBRATION: START STOPWATCH NOW !') 110 FORMAT(' TESTS ACCURACY OF FUNCTION SECOND()') 112 FORMAT(' Monoprocess this test, stand-alone, no TSS') 113 FORMAT(' Verify T or DT observe external clock:',/) 114 FORMAT(' ------- ------- ------ -----') 115 FORMAT(' Total T ? Delta T ? Mflops ? Flops') 119 FORMAT(4X,I2,3F12.2,2E15.5) C l= 0 n= 0 m= 200 nflop= 0 totalt= 0.00d0 deltat= 0.00d0 flops= 0.00d0 rn= 0.00d0 t1= 0.00d0 t2= 0.00d0 cumtim(1)= 0.0d0 t2= SECOND( cumtim(1)) IF( t2.GT. 1.00d04 ) GO TO 911 IF( t2.LT. 1.00d-8 ) GO TO 911 C 10 l= l + 1 m= m + m C X(1)= 0.0098000d0 Y(1)= 0.0000010d0 DO 2 i= 2,limitn Y(i)= Y(1) 2 continue C Compute LFK Kernel 11 m times DO 5 j= 1,m DO 4 k= 2,limitn X(k)= X(k-1) + Y(k) 4 continue X(1)= X(limitn) 5 continue C t1= t2 cumtim(1)= 0.0d0 t2= SECOND( cumtim(1)) C IF elapsed time can be observed, Print Mark. totalt= t2 - t0 deltat= t2 - t1 nflop= nflop + (limitn - 1) * m IF( deltat .GT. 2.00d0 .OR. l.GT.12 ) THEN n= n + 1 rn= REAL( nflop) flops= 1.00d-6 *( REAL( nflop)/( totalt +1.00d-9)) WRITE( *,119) l, totalt, deltat, flops, rn, X(limitn) ENDIF IF( deltat .LT. 200.0d0 .OR. n.LT.3 ) GO TO 10 C IF( n.LE.0 ) THEN WRITE( *,119) l, totalt, deltat, flops, rn, X(limitn) ENDIF STOP C 911 WRITE( *,61) WRITE( *,62) totalt STOP C 61 FORMAT(1X,'FATAL(CALIBR): cant measure time using func SECOND()') 62 FORMAT(/,13X,'using SECOND(): totalt=',1E20.8,' ?') C END C C*********************************************** SUBROUTINE INDEX C*********************************************** C MODULE PURPOSE C ------ ----------------------------------------------- C C CALIBR cpu clock calibration tests accuracy of SECOND function C C INDATA initialize variables C C IQRANF computes a vector of pseudo-random indices C IQRAN0 define seed for new IQRANF sequence C C KERNEL executes 24 samples of Fortran computation C C PFM optional call to system hardware performance monitor C c RELERR relative error between u,v (0.,1.) C C REPORT prints timing results C C RESULT computes execution rates into pushdown store C C SECOND cumulative CPU time for task in seconds (M.K.S. units) C C SECOVT measures the Overhead time for calling SECOND C C SENSIT sensitivity analysis of harmonic mean to 49 workloads C C SEQDIG computes nr significant, equal digits in pairs of numbers C C SIGNEL generates a set of floating-point numbers near 1.0 C C SIMD sensitivity analysis of harmonic mean to SISD/SIMD model C C SIZES test and set the loop controls before each kernel test C C SORDID simple sort C C SPACE sets memory pointers for array variables. optional. C C SPEDUP computes Speed-ups: A circumspect method of comparison. C C STATS calculates unweighted statistics C C STATW calculates weighted statistics C C SUMO check-sum with ordinal dependency C C SUPPLY initializes common blocks containing type real arrays. C C TALLY computes average and minimum Cpu timings and variances. C C TDIGIT counts lead digits followed by trailing zeroes C C TEST Repeats and times the execution of each kernel C C TESTS Checksums and initializes the data for each kernel test C C TICK measures timing overhead of subroutine test C C TILE computes m-tile value and corresponding index C C TRACE ,TRACK push/pop caller's name and serial nr. in /DEBUG/ C C TRAP checks that index-list values are in valid domain C C TRIAL validates checksums of current run for endurance trial C C VALID compresses valid timing results C C VALUES initializes special values C C VERIFY verifies sufficient Loop size versus cpu clock accuracy C C WATCH can continually test COMMON variables and localize bugs c c ------------ -------- -------- -------- -------- -------- -------- c ENTRY LEVELS: 1 2 3 4 5 6 c ------------ -------- -------- -------- -------- -------- -------- c MAIN. SECOND c INDATA c VERIFY SECOND c SIZES IQRAN0 c STATS SQRT c TDIGIT LOG10 c SIZES IQRAN0 c c TICK TEST TESTS SECOND c SIZES c SUMO c VALUES SUPPLY SIGNEL c IQRANF MOD c SECOND c VALID TRAP TRAP c STATS SQRT c IQRANF MOD c TRAP c KERNEL SPACE c SQRT c EXP c TEST TESTS SECOND c SIZES c SUMO c VALUES SUPPLY SIGNEL c IQRANF MOD c SECOND c TRIAL SEQDIG LOG10 TDIGIT c IQRAN0 c c RESULT TALLY SIZES IQRAN0 TRAP c PAGE c STATS SQRT c c SEQDIG LOG10 TDIGIT c c REPORT VALID TRAP c MOD c STATW SORDID TRAP c TILE c SQRT c LOG10 c PAGE c TRAP c SENSIT VALID TRAP c SORDID TRAP c PAGE c STATW SORDID TRAP c TILE c SIMD VALID TRAP c STATW SORDID TRAP c TILE c SPEDUP C STOP C C C C C All subroutines also call TRACE , TRACK , and WATCH to assist debugging. C C C C C C C c ------ ---- ------ ----- ------------------------------------ c BASE TYPE CLASS NAME GLOSSARY c ------ ---- ------ ----- ------------------------------------ c SPACE0 R Array BIAS - scale factors for SIGNEL data generator c SPACE0 R Array CSUM - checksums of KERNEL result arrays c BETA R Array CSUMS - sets of CSUM for all test runs c BETA R Array DOS - sets of TOTAL flops for all test runs c SPACE0 R Array FLOPN - flop counts for one execution pass c BETA R Array FOPN - sets of FLOPN for all test runs c SPACE0 R Array FR - vectorisation fractions; abscissa for REPORT c SPACES I scalar ibuf - flag enables one call to SIGNEL c ALPHA I scalar ik - current number of executing kernel c ALPHA I scalar il - selects one of three sets of loop spans c SPACES I scalar ion - logical I/O unit number for output c SPACEI I Array IPASS - Loop control limits for multiple-pass loops c SPACE0 I Array IQ - set of workload weights for REPORT c SPACEI I Array ISPAN - loop control limits for each kernel c SPACES I scalar j5 - datum in kernel 16 c ALPHA I scalar jr - current test run number (1 thru 7) c SPACES I scalar k2 - counter in kernel 16 c SPACES I scalar k3 - counter in kernel 16 c SPACES I scalar kr - a copy of mk c SPACES I scalar laps - multiplies Nruns for long Endurance test c SPACES I scalar Loop - current multiple-pass loop limit in KERNEL c SPACES I scalar m - temp integer datum c ALPHA I scalar mk - number of kernels to evaluate .LE.24 c ALPHA I scalar ml - maximum value of il= 3 c SPACES I scalar mpy - repetiton counter of MULTI pass loop c SPACES I scalar Loops2- repetiton loop limit c ALPHA I scalar Mruns - number of complete test runs .GE.Nruns c SPACEI I Array MUL - multipliers * IPASS defines Loop c SPACES I scalar MULTI - Multiplier used to compute Loop in SIZES c SPACES I scalar n - current DO loop limit in KERNEL c SPACES I scalar n1 - dimension of most 1-D arrays c SPACES I scalar n13 - dimension used in kernel 13 c SPACES I scalar n13h - dimension used in kernel 13 c SPACES I scalar n14 - dimension used in kernel 14 c SPACES I scalar n16 - dimension used in kernel 16 c SPACES I scalar n2 - dimension of most 2-D arrays c SPACES I scalar n21 - dimension used in kernel 21 c SPACES I scalar n213 - dimension used in kernel 21 c SPACES I scalar n416 - dimension used in kernel 16 c SPACES I scalar n813 - dimension used in kernel 13 c SPACE0 I scalar npf - temp integer datum c ALPHA I Array NPFS - sets of NPFS1 for all test runs c SPACE0 I Array NPFS1 - number of page-faults for each kernel c ALPHA I scalar Nruns - number of complete test runs .LE.7 c SPACES I scalar nt1 - total size of common -SPACE1- words c SPACES I scalar nt2 - total size of common -SPACE2- words c BETA R Array SEE - (i,1,jr,il) sets of TEST overhead times c BETA R Array SEE - (i,2,jr,il) sets of csums of SPACE1 c BETA R Array SEE - (i,3,jr,il) sets of csums of SPACE2 c SPACE0 R Array SKALE - scale factors for SIGNEL data generator c SPACE0 R scalar start - temp start time of each kernel c PROOF R Array SUMS - sets of verified checksums for all test runs c SPACE0 R Array SUMW - set of quartile weights for REPORT c TAU R scalar tclock- minimum cpu clock time= resolution c SPACE0 R Array TERR1 - overhead-time errors for each kernel c BETA R Array TERRS - sets of TERR1 for all runs c TAU R scalar testov- average overhead time in TEST linkage c BETA R scalar tic - average overhead time in SECOND (copy) c SPACE0 R scalar ticks - average overhead time in TEST linkage(copy) c SPACE0 R Array TIME - net execution times for all kernels c BETA R Array TIMES - sets of TIME for all test runs c SPACE0 R Array TOTAL - total flops computed by each kernel c TAU R scalar tsecov- average overhead time in SECOND c SPACE0 R Array WS - unused c SPACE0 R Array WT - weights for each kernel sample c SPACEI R Array WTP - weights for the 3 span-varying passes c SPACE0 R Array WW - unused C C c --------- ----------------------------------------------------------------- c COMMON Usage c --------- ----------------------------------------------------------------- C C /ALPHA / C VERIFY TICK TALLY SIZES RESULT REPORT KERNEL C MAIN. C /BASE1 / C SUPPLY C /BASE2 / C SUPPLY C /BASER / C SUPPLY C /BETA / C TICK TALLY SIZES RESULT REPORT KERNEL C /DEBUG / C TRACE TRACK TRAP C /ORDER / C TRACE TRACK TRAP C /PROOF / C RESULT BLOCKDATA C /SPACE0/ C VALUES TICK TEST TALLY SUPPLY SIZES RESULT C REPORT KERNEL BLOCKDATA C /SPACE1/ C VERIFY VALUES TICK TEST SUPPLY SPACE KERNEL C /SPACE2/ C VERIFY VALUES TICK TEST SUPPLY SPACE KERNEL C /SPACE3/ C VALUES C /SPACEI/ C VERIFY VALUES TICK TEST SIZES RESULT REPORT C KERNEL BLOCKDATA C /SPACER/ C VALUES TICK TEST SUPPLY SIZES KERNEL C /SPACES/ C VERIFY VALUES TICK TEST SUPPLY SIZES KERNEL C BLOCKDATA c --------- ----------------------------------------------------------------- c c c SubrouTine Timing on CRAY-XMP1: c c Subroutine Time(%) All Scalar c c KERNEL 52.24% c SUPPLY 17.85% c VERIFY 8.76% c VALUES 6.15% c STATS 5.44% c DMPY 1.97% c DADD 1.53% c EXP 1.02% c SQRT .99% c SORDID .81% c DDIV .38% c IQRANF .25% c SUMO .22% c TRACE .19% c SIGNEL .16% c TRAP .10% c TRACK .10% c STATW .08% c TILE .04% c SIZES .03% c ALOG10 .03% c c Subroutine Time(%) Auto Vector c c KERNEL 56.28% c VALUES 10.33% c STATS 8.57% c DADD 4.34% c DMPY 3.86% c VERIFY 2.61% c SUPPLY 2.28% c SQRT 2.10% c SORDID 1.84% c SUMO .80% c DDIV .78% c SDOT .67% c TRACE .53% c IQRANF .50% c SIGNEL .36% c EXP .32% c TRACK .23% c TRAP .20% c ALOG10 .18% c STATW .16% c c RETURN END C C*************************************** SUBROUTINE INDATA( TK, iou) C*************************************** C INDATA initialize variables C cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) C C/ PARAMETER( kn= 47, kn2= 95, np= 3, ls= 3*47, krs= 24) C/ PARAMETER( nk= 47, nl= 3, nr= 8 ) DIMENSION TK(6) COMMON /ALPHA/ mk,ik,im,ml,il,Mruns,Nruns,jr,iovec,NPFS(8,3,47) COMMON /TAU/ tclock, tsecov, testov, cumtim(4) COMMON /BETA / tic, TIMES(8,3,47), SEE(5,3,8,3), 1 TERRS(8,3,47), CSUMS(8,3,47), 2 FOPN(8,3,47), DOS(8,3,47) C COMMON /SPACE0/ TIME(47), CSUM(47), WW(47), WT(47), ticks, 1 FR(9), TERR1(47), SUMW(7), START, 2 SKALE(47), BIAS(47), WS(95), TOTAL(47), FLOPN(47), 3 IQ(7), NPF, NPFS1(47) C COMMON /ORDER/ inseq, match, NSTACK(20), isave, iret COMMON /SPACES/ ion,j5,k2,k3,MULTI,laps,Loop,m,kr,LP,n13h,ibuf,nx, 1 L,npass,nfail,n,n1,n2,n13,n213,n813,n14,n16,n416,n21,nt1,nt2, 2 last,idebug,mpy,Loops2,mucho,mpylim, intbuf(16) C TK(1)= 0.00d0 TK(2)= 0.00d0 testov= 0.00d0 ticks = 0.00d0 tclock= 0.00d0 tsecov= 0.00d0 tic = 0.00d0 C jr = 1 Nruns = 1 il = 1 mk = 1 ik = 1 C inseq = 0 isave = 0 iret = 0 C Loops2= 1 mpylim= Loops2 mpy = 1 MULTI = 1 mucho = 1 L = 1 Loop = 1 LP = Loop n = 0 C iou = 8 ion = iou CALL INITIO( 8, 'output') C CALL INITIO( 7, 'chksum') C CALL TRACE ('INDATA ') CPFM IF( INIPFM( ion, 0) .NE. 0 ) THEN CPFM CALL WHERE(20) CPFM ENDIF C CLLL. call Q8EBM C WRITE ( *,7002) WRITE ( *,7003) WRITE ( *,7002) WRITE ( iou,7002) WRITE ( iou,7003) WRITE ( iou,7002) 7002 FORMAT( ' *********************************************' ) 7003 FORMAT( ' THE LIVERMORE FORTRAN KERNELS "MFLOPS" TEST:' ) WRITE( iou, 797) WRITE( iou, 798) 797 FORMAT(' >>> USE 72 SAMPLES LFK TEST RESULTS SUMMARY (line 330+)') 798 FORMAT(' >>> USE ALL RANGE STATISTICS FOR OFFICIAL QUOTATIONS. ') CALL TRACK ('INDATA ') RETURN END C C************************************************* SUBROUTINE INITIO( iou, name ) C*********************************************************************** C * C INITIO - Assign logdevice nr "iou" to disk file "name" * C * C iou - logical i/o device number * C name - name to assign to disk file * C * C*********************************************************************** LOGICAL LIVING CHARACTER *(*) name C CALL TRACE ('INITIO ') C INQUIRE( FILE=name, EXIST= LIVING ) IF( LIVING ) THEN OPEN ( UNIT=iou, FILE=name, STATUS='OLD') CLOSE( UNIT=iou, STATUS='DELETE') ENDIF OPEN (UNIT=iou, FILE=name, STATUS='NEW') C C CALL TRACK ('INITIO ') RETURN END C C*************************************** SUBROUTINE IQRAN0( newk) C*************************************** C c IQRAN0 - define seed for new IQRANF sequence C cANSI IMPLICIT DOUBLE PRECISION (A-H,K,O-Z) cIBM IMPLICIT REAL*8 (A-H,K,O-Z) C COMMON /IQRAND/ k0, k, k9 CALL TRACE ('IQRAN0 ') C IF( newk.LE.0 ) THEN CALL WHERE(1) ENDIF k = newk C CALL TRACK ('IQRAN0 ') RETURN END C C*************************************** SUBROUTINE IQRANF( M, Mmin,Mmax, n) C*********************************************************************** C * c IQRANF - computes a vector of psuedo-random indices * c in the domain (Mmin,Mmax) * C * C M - result array , psuedo-random positive integers * C Mmin - input integer, lower bound for random integers * C Mmax - input integer, upper bound for random integers * C n - input integer, number of results in M. * C * C M(i)= Mmin + INT( (Mmax-Mmin) * RANF(0)) * C * c CALL IQRAN0( 256 ) * c CALL IQRANF( IX, 1,1001, 30) should produce in IX: * c 3 674 435 415 389 54 44 790 900 282 * c 177 971 728 851 687 604 815 971 155 112 * c 877 814 779 192 619 894 544 404 496 505 ... * C * C S.K.Park, K.W.Miller, Random Number Generators: Good Ones * C Are Hard To Find, Commun ACM, 31(10), 1192-1201 (1988). * C*********************************************************************** C cANSI IMPLICIT DOUBLE PRECISION (A-H,K,O-Z) cIBM IMPLICIT REAL*8 (A-H,K,O-Z) DOUBLE PRECISION dq, dp, per, dk, spin, span REDUNDNT C dimension M(n) COMMON /IQRAND/ k0, k, k9 c save k CALL TRACE ('IQRANF ') IF( n.LE.0 ) GO TO 73 inset= Mmin span= Mmax - Mmin c spin= 16807.00d0 c per= 2147483647.00d0 spin= 16807 per= 2147483647 realn= n scale= 1.0000100d0 q= scale*(span/realn) C dk= k DO 1 i= 1,n dp= dk*spin c dk= DMOD( dp, per) dk= dp -INT( dp/per)*per dq= dk*span M(i)= inset + ( dq/ per) IF( M(i).LT.Mmin .OR. M(i).GT.Mmax ) M(i)= inset + i*q 1 continue k= dk C C ciC double precision k, ip, iq, id ci inset= Mmin ci ispan= Mmax - Mmin ci ispin= 16807 ci id= 2147483647 ci q= (REAL(ispan)/REAL(n))*1.00001 ciC ci DO 2 i= 1,n ci ip= k*ispin ci k= MOD( ip, id) ci iq= k*ispan ci M(i)= inset + ( iq/ id) ci IF( M(i).LT.Mmin .OR. M(i).GT.Mmax ) M(i)= inset + i*q ci 2 continue C CALL TRAP( M, 8H IQRANF , 1, Mmax, n) C 73 CONTINUE CALL TRACK ('IQRANF ') RETURN c DATA k /256/ c IQRANF TEST PROGRAM: c parameter( nrange= 10000, nmaps= 1001 ) c DIMENSION IX(nrange), IY(nmaps), IZ(nmaps), IR(nmaps) c COMMON /IQRAND/ k0, k, k9 cc c CALL LINK( 'UNIT6=( output,create,text)//') c iou= 8 c DO 7 j= 1,256,255 c CALL IQRAN0( j ) c CALL IQRANF( IX, 1, nmaps, nrange) c DO 1 i= 1,nmaps c IY(i)= 0 c 1 IZ(i)= 0 cc census for each index generated in (1:nmaps) c DO 2 i= 1,nrange c 2 IY( IX(i))= IY( IX(i)) + 1 cc distribution of census tallies about nrange/nmaps c DO 3 i= 1,nmaps c 3 IZ( IY(i))= IZ( IY(i)) + 1 c IR(1)= IZ(1) cc integral of distribution c DO 4 i= 1,nmaps c 4 IR(i)= IR(i-1) + IZ(i) c WRITE( iou,112) j, IR(nmaps), k c WRITE( iou,113) ( IX(i), i= 1,20 ) c WRITE( iou,113) ( IY(i), i= 1,20 ) c WRITE( iou,113) ( IZ(i), i= 1,20 ) c WRITE( iou,113) ( IR(i), i= 1,20 ) c 112 FORMAT(/,1X,4I20) c 113 FORMAT(20I4) c 7 continue c STOP c c 1 1000 1043618065 c 1 132 756 459 533 219 48 679 680 935 384 520 831 35 54 530 672 8 384 67 c 17 12 7 10 10 10 10 12 9 9 4 15 10 7 7 9 9 9 10 11 c 0 1 8 19 40 60 86 109 133 128 107 104 70 52 39 26 7 7 2 2 c 0 1 9 28 68 128 214 323 456 584 691 795 865 917 956 982 989 996 9981000 c c 256 1000 878252412 c 3 674 435 415 389 54 44 790 900 282 177 971 728 851 687 604 815 971 155 112 c 11 17 19 6 11 11 7 9 12 7 13 7 9 11 14 9 9 12 9 9 c 1 2 10 16 30 71 93 109 131 119 118 105 69 47 28 15 15 9 5 3 c 1 3 13 29 59 130 223 332 463 582 700 805 874 921 949 964 979 988 993 996 END C C*********************************************** SUBROUTINE KERNEL( TK) C*********************************************************************** C * C KERNEL executes 24 samples of Fortran computation * c TK(1) - total cpu time to execute only the 24 kernels. * c TK(2) - total Flops executed by the 24 Kernels * C*********************************************************************** C * C L. L. N. L. F O R T R A N K E R N E L S: M F L O P S * C * C These kernels measure Fortran numerical computation rates for a * C spectrum of CPU-limited computational structures. Mathematical * C through-put is measured in units of millions of floating-point * C operations executed per Second, called Mega-Flops/Sec. * C * C This program measures a realistic CPU performance range for the * C Fortran programming system on a given day. The CPU performance * C rates depend strongly on the maturity of the Fortran compiler's * C ability to translate Fortran code into efficient machine code. * C [ The CPU hardware capability apart from compiler maturity (or * C availability), could be measured (or simulated) by programming the * C kernels in assembly or machine code directly. These measurements * C can also serve as a framework for tracking the maturation of the * C Fortran compiler during system development.] * C * C Fonzi's Law: There is not now and there never will be a language * C in which it is the least bit difficult to write * C bad programs. * C F.H.MCMAHON 1972 * C*********************************************************************** C C l1 := param-dimension governs the size of most 1-d arrays C l2 := param-dimension governs the size of most 2-d arrays C C Loop := multiple pass control to execute kernel long enough to time. C n := DO loop control for each kernel. Controls are set in subr. SIZES C C ****************************************************************** C cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) C C/ PARAMETER( l1= 1001, l2= 101, l1d= 2*1001 ) C/ PARAMETER( l13= 64, l13h= l13/2, l213= l13+l13h, l813= 8*l13 ) C/ PARAMETER( l14=2048, l16= 75, l416= 4*l16 , l21= 25 ) C/ PARAMETER( kn= 47, kn2= 95, np= 3, ls= 3*47, krs= 24) C C C/ PARAMETER( nk= 47, nl= 3, nr= 8 ) INTEGER TEST, AND C COMMON /ALPHA/ mk,ik,im,ml,il,Mruns,Nruns,jr,iovec,NPFS(8,3,47) COMMON /BETA / tic, TIMES(8,3,47), SEE(5,3,8,3), 1 TERRS(8,3,47), CSUMS(8,3,47), 2 FOPN(8,3,47), DOS(8,3,47) C COMMON /SPACES/ ion,j5,k2,k3,MULTI,laps,Loop,m,kr,LP,n13h,ibuf,nx, 1 L,npass,nfail,n,n1,n2,n13,n213,n813,n14,n16,n416,n21,nt1,nt2, 2 last,idebug,mpy,Loops2,mucho,mpylim, intbuf(16) C COMMON /SPACER/ A11,A12,A13,A21,A22,A23,A31,A32,A33, 2 AR,BR,C0,CR,DI,DK, 3 DM22,DM23,DM24,DM25,DM26,DM27,DM28,DN,E3,E6,EXPMAX,FLX, 4 Q,QA,R,RI,S,SCALE,SIG,STB5,T,XNC,XNEI,XNM C CPFM COMMON /KAPPA/ iflag1, ikern, statis(100,20), istats(100,20) C COMMON /SPACE0/ TIME(47), CSUM(47), WW(47), WT(47), ticks, 1 FR(9), TERR1(47), SUMW(7), START, 2 SKALE(47), BIAS(47), WS(95), TOTAL(47), FLOPN(47), 3 IQ(7), NPF, NPFS1(47) C COMMON /SPACEI/ WTP(3), MUL(3), ISPAN(47,3), IPASS(47,3) C C/ INTEGER E,F,ZONE C/ COMMON /ISPACE/ E(l213), F(l213), C/ 1 IX(l1), IR(l1), ZONE(l416) C/C C/ COMMON /SPACE1/ U(l1), V(l1), W(l1), C/ 1 X(l1), Y(l1), Z(l1), G(l1), C/ 2 DU1(l2), DU2(l2), DU3(l2), GRD(l1), DEX(l1), C/ 3 XI(l1), EX(l1), EX1(l1), DEX1(l1), C/ 4 VX(l14), XX(l14), RX(l14), RH(l14), C/ 5 VSP(l2), VSTP(l2), VXNE(l2), VXND(l2), C/ 6 VE3(l2), VLR(l2), VLIN(l2), B5(l2), C/ 7 PLAN(l416), D(l416), SA(l2), SB(l2) C/C C/ COMMON /SPACE2/ P(4,l813), PX(l21,l2), CX(l21,l2), C/ 1 VY(l2,l21), VH(l2,7), VF(l2,7), VG(l2,7), VS(l2,7), C/ 2 ZA(l2,7) , ZP(l2,7), ZQ(l2,7), ZR(l2,7), ZM(l2,7), C/ 3 ZB(l2,7) , ZU(l2,7), ZV(l2,7), ZZ(l2,7), C/ 4 B(l13,l13), C(l13,l13), H(l13,l13), C/ 5 U1(5,l2,2), U2(5,l2,2), U3(5,l2,2) C C ****************************************************************** C C C/ PARAMETER( l1= 1001, l2= 101, l1d= 2*1001 ) C/ PARAMETER( l13= 64, l13h= 64/2, l213= 64+32, l813= 8*64 ) C/ PARAMETER( l14= 2048, l16= 75, l416= 4*75 , l21= 25) C C care C INTEGER E,F,ZONE COMMON /ISPACE/ E(96), F(96), 1 IX(1001), IR(1001), ZONE(300) C COMMON /SPACE1/ U(1001), V(1001), W(1001), 1 X(1001), Y(1001), Z(1001), G(1001), 2 DU1(101), DU2(101), DU3(101), GRD(1001), DEX(1001), 3 XI(1001), EX(1001), EX1(1001), DEX1(1001), 4 VX(1001), XX(1001), RX(1001), RH(2048), 5 VSP(101), VSTP(101), VXNE(101), VXND(101), 6 VE3(101), VLR(101), VLIN(101), B5(101), 7 PLAN(300), D(300), SA(101), SB(101) C COMMON /SPACE2/ P(4,512), PX(25,101), CX(25,101), 1 VY(101,25), VH(101,7), VF(101,7), VG(101,7), VS(101,7), 2 ZA(101,7) , ZP(101,7), ZQ(101,7), ZR(101,7), ZM(101,7), 3 ZB(101,7) , ZU(101,7), ZV(101,7), ZZ(101,7), 4 B(64,64), C(64,64), H(64,64), 5 U1(5,101,2), U2(5,101,2), U3(5,101,2) C C ****************************************************************** C DIMENSION ZX(1023), XZ(1500), TK(6) EQUIVALENCE ( ZX(1), Z(1)), ( XZ(1), X(1)) C C C// DIMENSION E(96), F(96), U(1001), V(1001), W(1001), C// 1 X(1001), Y(1001), Z(1001), G(1001), C// 2 DU1(101), DU2(101), DU3(101), GRD(1001), DEX(1001), C// 3 IX(1001), XI(1001), EX(1001), EX1(1001), DEX1(1001), C// 4 VX(1001), XX(1001), IR(1001), RX(1001), RH(2048), C// 5 VSP(101), VSTP(101), VXNE(101), VXND(101), C// 6 VE3(101), VLR(101), VLIN(101), B5(101), C// 7 PLAN(300), ZONE(300), D(300), SA(101), SB(101) C//C C// DIMENSION P(4,512), PX(25,101), CX(25,101), C// 1 VY(101,25), VH(101,7), VF(101,7), VG(101,7), VS(101,7), C// 2 ZA(101,7) , ZP(101,7), ZQ(101,7), ZR(101,7), ZM(101,7), C// 3 ZB(101,7) , ZU(101,7), ZV(101,7), ZZ(101,7), C// 4 B(64,64), C(64,64), H(64,64), C// 5 U1(5,101,2), U2(5,101,2), U3(5,101,2) C//C C//C ****************************************************************** C//C C// COMMON /POINT/ ME,MF,MU,MV,MW,MX,MY,MZ,MG,MDU1,MDU2,MDU3,MGRD, C// 1 MDEX,MIX,MXI,MEX,MEX1,MDEX1,MVX,MXX,MIR,MRX,MRH,MVSP,MVSTP, C// 2 MVXNE,MVXND,MVE3,MVLR,MVLIN,MB5,MPLAN,MZONE,MD,MSA,MSB, C// 3 MP,MPX,MCX,MVY,MVH,MVF,MVG,MVS,MZA,MZP,MZQ,MZR,MZM,MZB,MZU, C// 4 MZV,MZZ,MB,MC,MH,MU1,MU2,MU3 C//C C// POINTER (ME,E), (MF,F), (MU,U), (MV,V), (MW,W), C// 1 (MX,X), (MY,Y), (MZ,Z), (MG,G), C// 2 (MDU1,DU1),(MDU2,DU2),(MDU3,DU3),(MGRD,GRD),(MDEX,DEX), C// 3 (MIX,IX), (MXI,XI), (MEX,EX), (MEX1,EX1), (MDEX1,DEX1), C// 4 (MVX,VX), (MXX,XX), (MIR,IR), (MRX,RX), (MRH,RH), C// 5 (MVSP,VSP), (MVSTP,VSTP), (MVXNE,VXNE), (MVXND,VXND), C// 6 (MVE3,VE3), (MVLR,VLR), (MVLIN,VLIN), (MB5,B5), C// 7 (MPLAN,PLAN), (MZONE,ZONE), (MD,D), (MSA,SA), (MSB,SB) C//C C// POINTER (MP,P), (MPX,PX), (MCX,CX), C// 1 (MVY,VY), (MVH,VH), (MVF,VF), (MVG,VG), (MVS,VS), C// 2 (MZA,ZA), (MZP,ZP), (MZQ,ZQ), (MZR,ZR), (MZM,ZM), C// 3 (MZB,ZB), (MZU,ZU), (MZV,ZV), (MZZ,ZZ), C// 4 (MB,B), (MC,C), (MH,H), C// 5 (MU1,U1), (MU2,U2), (MU3,U3) C.. COMMON DUMMY(2000) C.. LOC(X) =.LOC.X C.. IQ8QDSP = 64*LOC(DUMMY) C C ****************************************************************** C C STANDARD PRODUCT COMPILER DIRECTIVES MAY BE USED FOR OPTIMIZATION C CDIR$ VECTOR CLLL. OPTIMIZE LEVEL i CLLL. OPTION INTEGER (7) CLLL. OPTION ASSERT (NO HAZARD) CLLL. OPTION NODYNEQV C C ****************************************************************** C BINARY MACHINES MAY USE THE AND(P,Q) FUNCTION IF AVAILABLE C IN PLACE OF THE FOLLOWING CONGRUENCE FUNCTION (SEE KERNEL 13, 14) C IFF: j= 2**N c IAND(j,k) = AND(j,k) CLLL. IAND(j,k) = j.INT.k c MOD2N(i,j)= MOD(i,j) MOD2N(i,j)= IAND(i,j-1) C i is Congruent to MOD2N(i,j) mod(j) C ****************************************************************** C C C C C CALL TRACE ('KERNEL ') C CALL SPACE C CPFM call OUTPFM( 0, ion) mpy = 1 Loops2= 1 mpylim= Loops2 L = 1 Loop = 1 LP = Loop it0 = TEST(0) CPFM iflag1= 13579 C C******************************************************************************* C*** KERNEL 1 HYDRO FRAGMENT C******************************************************************************* C cdir$ ivdep 1001 DO 1 k = 1,n 1 X(k)= Q + Y(k) * (R * ZX(k+10) + T * ZX(k+11)) C C................... IF( TEST(1) .GT. 0) GO TO 1001 C we must execute DO k= 1,n repeatedly for accurate timing C C******************************************************************************* C*** KERNEL 2 ICCG EXCERPT (INCOMPLETE CHOLESKY - CONJUGATE GRADIENT) C******************************************************************************* C C 1002 II= n IPNTP= 0 222 IPNT= IPNTP IPNTP= IPNTP+II II= II/2 i= IPNTP+1 cdir$ ivdep c:ibm_dir:ignore recrdeps (x) C DO 2 k= IPNT+2,IPNTP,2 i= i+1 2 X(i)= X(k) - V(k) * X(k-1) - V(k+1) * X(k+1) IF( II.GT.1) GO TO 222 C C................... IF( TEST(2) .GT. 0) GO TO 1002 C C******************************************************************************* C*** KERNEL 3 INNER PRODUCT C******************************************************************************* C C 1003 Q= 0.000d0 DO 3 k= 1,n 3 Q= Q + Z(k) * X(k) C C................... IF( TEST(3) .GT. 0) GO TO 1003 C C******************************************************************************* C*** KERNEL 4 BANDED LINEAR EQUATIONS C******************************************************************************* C m= (1001-7)/2 fw= 1.000d-25 C 1004 DO 404 k= 7,1001,m lw= k-6 temp= XZ(k-1) cdir$ ivdep DO 4 j= 5,n,5 temp = temp - XZ(lw) * Y(j) 4 lw= lw+1 XZ(k-1)= Y(5) * temp 404 CONTINUE C C................... IF( TEST(4) .GT. 0) GO TO 1004 C C******************************************************************************* C*** KERNEL 5 TRI-DIAGONAL ELIMINATION, BELOW DIAGONAL (NO VECTORS) C******************************************************************************* C C cdir$ novector 1005 DO 5 i = 2,n 5 X(i)= Z(i) * (Y(i) - X(i-1)) cdir$ vector C C................... IF( TEST(5) .GT. 0) GO TO 1005 C C******************************************************************************* C*** KERNEL 6 GENERAL LINEAR RECURRENCE EQUATIONS C******************************************************************************* C C 1006 DO 6 i= 2,n W(i)= 0.0100d0 DO 6 k= 1,i-1 W(i)= W(i) + B(i,k) * W(i-k) 6 CONTINUE C C................... IF( TEST(6) .GT. 0) GO TO 1006 C C******************************************************************************* C*** KERNEL 7 EQUATION OF STATE FRAGMENT C******************************************************************************* C C cdir$ ivdep 1007 DO 7 k= 1,n X(k)= U(k ) + R*( Z(k ) + R*Y(k )) + . T*( U(k+3) + R*( U(k+2) + R*U(k+1)) + . T*( U(k+6) + Q*( U(k+5) + Q*U(k+4)))) 7 CONTINUE C C................... IF( TEST(7) .GT. 0) GO TO 1007 C C C******************************************************************************* C*** KERNEL 8 A.D.I. INTEGRATION C******************************************************************************* C C 1008 nl1 = 1 nl2 = 2 fw= 2.000d0 DO 8 kx = 2,3 cdir$ ivdep DO 8 ky = 2,n DU1(ky)=U1(kx,ky+1,nl1) - U1(kx,ky-1,nl1) DU2(ky)=U2(kx,ky+1,nl1) - U2(kx,ky-1,nl1) DU3(ky)=U3(kx,ky+1,nl1) - U3(kx,ky-1,nl1) U1(kx,ky,nl2)=U1(kx,ky,nl1) +A11*DU1(ky) +A12*DU2(ky) +A13*DU3(ky) . + SIG*(U1(kx+1,ky,nl1) -fw*U1(kx,ky,nl1) +U1(kx-1,ky,nl1)) U2(kx,ky,nl2)=U2(kx,ky,nl1) +A21*DU1(ky) +A22*DU2(ky) +A23*DU3(ky) . + SIG*(U2(kx+1,ky,nl1) -fw*U2(kx,ky,nl1) +U2(kx-1,ky,nl1)) U3(kx,ky,nl2)=U3(kx,ky,nl1) +A31*DU1(ky) +A32*DU2(ky) +A33*DU3(ky) . + SIG*(U3(kx+1,ky,nl1) -fw*U3(kx,ky,nl1) +U3(kx-1,ky,nl1)) 8 CONTINUE C C................... IF( TEST(8) .GT. 0) GO TO 1008 C C******************************************************************************* C*** KERNEL 9 INTEGRATE PREDICTORS C******************************************************************************* C C 1009 DO 9 k = 1,n PX( 1,k)= DM28*PX(13,k) + DM27*PX(12,k) + DM26*PX(11,k) + . DM25*PX(10,k) + DM24*PX( 9,k) + DM23*PX( 8,k) + . DM22*PX( 7,k) + C0*(PX( 5,k) + PX( 6,k))+ PX( 3,k) 9 CONTINUE C C................... IF( TEST(9) .GT. 0) GO TO 1009 C C******************************************************************************* C*** KERNEL 10 DIFFERENCE PREDICTORS C******************************************************************************* C C 1010 DO 10 k= 1,n AR = CX(5,k) BR = AR - PX(5,k) PX(5,k) = AR CR = BR - PX(6,k) PX(6,k) = BR AR = CR - PX(7,k) PX(7,k) = CR BR = AR - PX(8,k) PX(8,k) = AR CR = BR - PX(9,k) PX(9,k) = BR AR = CR - PX(10,k) PX(10,k)= CR BR = AR - PX(11,k) PX(11,k)= AR CR = BR - PX(12,k) PX(12,k)= BR PX(14,k)= CR - PX(13,k) PX(13,k)= CR 10 CONTINUE C C................... IF( TEST(10) .GT. 0) GO TO 1010 C C******************************************************************************* C*** KERNEL 11 FIRST SUM. PARTIAL SUMS. (NO VECTORS) C******************************************************************************* C C 1011 X(1)= Y(1) cdir$ novector DO 11 k = 2,n 11 X(k)= X(k-1) + Y(k) cdir$ vector C C................... IF( TEST(11) .GT. 0) GO TO 1011 C C******************************************************************************* C*** KERNEL 12 FIRST DIFF. C******************************************************************************* C C cdir$ ivdep 1012 DO 12 k = 1,n 12 X(k)= Y(k+1) - Y(k) C C................... IF( TEST(12) .GT. 0) GO TO 1012 C C******************************************************************************* C*** KERNEL 13 2-D PIC Particle In Cell C******************************************************************************* C fw= 1.000d0 C 1013 DO 13 k= 1,n i1= P(1,k) j1= P(2,k) i1= 1 + MOD2N(i1,64) j1= 1 + MOD2N(j1,64) P(3,k)= P(3,k) + B(i1,j1) P(4,k)= P(4,k) + C(i1,j1) P(1,k)= P(1,k) + P(3,k) P(2,k)= P(2,k) + P(4,k) i2= P(1,k) j2= P(2,k) i2= MOD2N(i2,64) j2= MOD2N(j2,64) P(1,k)= P(1,k) + Y(i2+32) P(2,k)= P(2,k) + Z(j2+32) i2= i2 + E(i2+32) j2= j2 + F(j2+32) H(i2,j2)= H(i2,j2) + fw 13 CONTINUE C C................... IF( TEST(13) .GT. 0) GO TO 1013 C C******************************************************************************* C*** KERNEL 14 1-D PIC Particle In Cell C******************************************************************************* C C fw= 1.000d0 C 1014 DO 141 k= 1,n VX(k)= 0.0d0 XX(k)= 0.0d0 IX(k)= INT( GRD(k)) XI(k)= REAL( IX(k)) EX1(k)= EX ( IX(k)) DEX1(k)= DEX ( IX(k)) 141 CONTINUE C DO 142 k= 1,n VX(k)= VX(k) + EX1(k) + (XX(k) - XI(k))*DEX1(k) XX(k)= XX(k) + VX(k) + FLX IR(k)= XX(k) RX(k)= XX(k) - IR(k) IR(k)= MOD2N( IR(k),2048) + 1 XX(k)= RX(k) + IR(k) 142 CONTINUE C DO 14 k= 1,n RH(IR(k) )= RH(IR(k) ) + fw - RX(k) RH(IR(k)+1)= RH(IR(k)+1) + RX(k) 14 CONTINUE C C................... IF( TEST(14) .GT. 0) GO TO 1014 C C C C C C C C C C C C C C C C C C C C******************************************************************************* C*** KERNEL 15 CASUAL FORTRAN. DEVELOPMENT VERSION. C******************************************************************************* C C C CASUAL ORDERING OF SCALAR OPERATIONS IS TYPICAL PRACTICE. C THIS EXAMPLE DEMONSTRATES THE NON-TRIVIAL TRANSFORMATION C REQUIRED TO MAP INTO AN EFFICIENT MACHINE IMPLEMENTATION. C C 1015 NG= 7 NZ= n AR= 0.05300d0 BR= 0.07300d0 DO 45 j = 2,NG DO 45 k = 2,NZ IF( j-NG) 31,30,30 30 VY(k,j)= 0.0d0 GO TO 45 31 IF( VH(k,j+1) -VH(k,j)) 33,33,32 32 T= AR GO TO 34 33 T= BR 34 IF( VF(k,j) -VF(k-1,j)) 35,36,36 35 R= MAX( VH(k-1,j), VH(k-1,j+1)) S= VF(k-1,j) GO TO 37 36 R= MAX( VH(k,j), VH(k,j+1)) S= VF(k,j) 37 VY(k,j)= SQRT( VG(k,j)**2 +R*R)*T/S IF( k-NZ) 40,39,39 39 VS(k,j)= 0.0d0 GO TO 45 40 IF( VF(k,j) -VF(k,j-1)) 41,42,42 41 R= MAX( VG(k,j-1), VG(k+1,j-1)) S= VF(k,j-1) T= BR GO TO 43 42 R= MAX( VG(k,j), VG(k+1,j)) S= VF(k,j) T= AR 43 VS(k,j)= SQRT( VH(k,j)**2 +R*R)*T/S 45 CONTINUE C C................... IF( TEST(15) .GT. 0) GO TO 1015 C C C C C C C C C C C C C C C******************************************************************************* C*** KERNEL 16 MONTE CARLO SEARCH LOOP C******************************************************************************* C II= n/3 LB= II+II k2= 0 k3= 0 C C 1016 m= 1 i1= m 410 j2= (n+n)*(m-1)+1 DO 470 k= 1,n k2= k2+1 j4= j2+k+k j5= ZONE(j4) IF( j5-n ) 420,475,450 415 IF( j5-n+II ) 430,425,425 420 IF( j5-n+LB ) 435,415,415 425 IF( PLAN(j5)-R) 445,480,440 430 IF( PLAN(j5)-S) 445,480,440 435 IF( PLAN(j5)-T) 445,480,440 440 IF( ZONE(j4-1)) 455,485,470 445 IF( ZONE(j4-1)) 470,485,455 450 k3= k3+1 IF( D(j5)-(D(j5-1)*(T-D(j5-2))**2+(S-D(j5-3))**2 . +(R-D(j5-4))**2)) 445,480,440 455 m= m+1 IF( m-ZONE(1) ) 465,465,460 460 m= 1 465 IF( i1-m) 410,480,410 470 CONTINUE 475 CONTINUE 480 CONTINUE 485 CONTINUE C C................... IF( TEST(16) .GT. 0) GO TO 1016 C C******************************************************************************* C*** KERNEL 17 IMPLICIT, CONDITIONAL COMPUTATION (NO VECTORS) C******************************************************************************* C C RECURSIVE-DOUBLING VECTOR TECHNIQUES CAN NOT BE USED C BECAUSE CONDITIONAL OPERATIONS APPLY TO EACH ELEMENT. C dw= 5.0000d0/3.0000d0 fw= 1.0000d0/3.0000d0 tw= 1.0300d0/3.0700d0 cdir$ novector C 1017 k= n j= 1 ink= -1 SCALE= dw XNM= fw E6= tw GO TO 61 C STEP MODEL 60 E6= XNM*VSP(k)+VSTP(k) VXNE(k)= E6 XNM= E6 VE3(k)= E6 k= k+ink IF( k.EQ.j) GO TO 62 61 E3= XNM*VLR(k) +VLIN(k) XNEI= VXNE(k) VXND(k)= E6 XNC= SCALE*E3 C SELECT MODEL IF( XNM .GT.XNC) GO TO 60 IF( XNEI.GT.XNC) GO TO 60 C LINEAR MODEL VE3(k)= E3 E6= E3+E3-XNM VXNE(k)= E3+E3-XNEI XNM= E6 k= k+ink IF( k.NE.j) GO TO 61 62 CONTINUE cdir$ vector C C................... IF( TEST(17) .GT. 0) GO TO 1017 C C******************************************************************************* C*** KERNEL 18 2-D EXPLICIT HYDRODYNAMICS FRAGMENT C******************************************************************************* C C 1018 T= 0.003700d0 S= 0.004100d0 KN= 6 JN= n DO 70 k= 2,KN DO 70 j= 2,JN ZA(j,k)= (ZP(j-1,k+1)+ZQ(j-1,k+1)-ZP(j-1,k)-ZQ(j-1,k)) . *(ZR(j,k)+ZR(j-1,k))/(ZM(j-1,k)+ZM(j-1,k+1)) ZB(j,k)= (ZP(j-1,k)+ZQ(j-1,k)-ZP(j,k)-ZQ(j,k)) . *(ZR(j,k)+ZR(j,k-1))/(ZM(j,k)+ZM(j-1,k)) 70 CONTINUE C DO 72 k= 2,KN DO 72 j= 2,JN ZU(j,k)= ZU(j,k)+S*(ZA(j,k)*(ZZ(j,k)-ZZ(j+1,k)) . -ZA(j-1,k) *(ZZ(j,k)-ZZ(j-1,k)) . -ZB(j,k) *(ZZ(j,k)-ZZ(j,k-1)) . +ZB(j,k+1) *(ZZ(j,k)-ZZ(j,k+1))) ZV(j,k)= ZV(j,k)+S*(ZA(j,k)*(ZR(j,k)-ZR(j+1,k)) . -ZA(j-1,k) *(ZR(j,k)-ZR(j-1,k)) . -ZB(j,k) *(ZR(j,k)-ZR(j,k-1)) . +ZB(j,k+1) *(ZR(j,k)-ZR(j,k+1))) 72 CONTINUE C DO 75 k= 2,KN DO 75 j= 2,JN ZR(j,k)= ZR(j,k)+T*ZU(j,k) ZZ(j,k)= ZZ(j,k)+T*ZV(j,k) 75 CONTINUE C C................... IF( TEST(18) .GT. 0) GO TO 1018 C C******************************************************************************* C*** KERNEL 19 GENERAL LINEAR RECURRENCE EQUATIONS (NO VECTORS) C******************************************************************************* C 1019 KB5I= 0 C C IF( JR.LE.1 ) THEN cdir$ novector DO 191 k= 1,n B5(k+KB5I)= SA(k) +STB5*SB(k) STB5= B5(k+KB5I) -STB5 191 CONTINUE C ELSE C DO 193 i= 1,n k= n-i+1 B5(k+KB5I)= SA(k) +STB5*SB(k) STB5= B5(k+KB5I) -STB5 193 CONTINUE C ENDIF cdir$ vector C C................... IF( TEST(19) .GT. 0) GO TO 1019 C C******************************************************************************* C*** KERNEL 20 DISCRETE ORDINATES TRANSPORT: RECURRENCE (NO VECTORS) C******************************************************************************* C dw= 0.200d0 cdir$ novector C 1020 DO 20 k= 1,n DI= Y(k)-G(k)/( XX(k)+DK) DN= dw IF( DI.NE.0.0) DN= MAX( S,MIN( Z(k)/DI, T)) X(k)= ((W(k)+V(k)*DN)* XX(k)+U(k))/(VX(k)+V(k)*DN) XX(k+1)= (X(k)- XX(k))*DN+ XX(k) 20 CONTINUE cdir$ vector C C................... IF( TEST(20) .GT. 0) GO TO 1020 C C******************************************************************************* C*** KERNEL 21 MATRIX*MATRIX PRODUCT C******************************************************************************* C C 1021 DO 21 k= 1,25 DO 21 i= 1,25 DO 21 j= 1,n PX(i,j)= PX(i,j) +VY(i,k) * CX(k,j) 21 CONTINUE C C................... IF( TEST(21) .GT. 0) GO TO 1021 C C C C C C C C******************************************************************************* C*** KERNEL 22 PLANCKIAN DISTRIBUTION C******************************************************************************* C C C EXPMAX= 234.500d0 EXPMAX= 20.0000d0 fw= 1.00000d0 U(n)= 0.99000d0*EXPMAX*V(n) C 1022 DO 22 k= 1,n care IF( U(k) .LT. EXPMAX*V(k)) THEN Y(k)= U(k)/V(k) care ELSE care Y(k)= EXPMAX care ENDIF W(k)= X(k)/( EXP( Y(k)) -fw) 22 CONTINUE C................... IF( TEST(22) .GT. 0) GO TO 1022 C C******************************************************************************* C*** KERNEL 23 2-D IMPLICIT HYDRODYNAMICS FRAGMENT C******************************************************************************* C fw= 0.17500d0 C 1023 DO 23 j= 2,6 DO 23 k= 2,n QA= ZA(k,j+1)*ZR(k,j) +ZA(k,j-1)*ZB(k,j) + . ZA(k+1,j)*ZU(k,j) +ZA(k-1,j)*ZV(k,j) +ZZ(k,j) 23 ZA(k,j)= ZA(k,j) +fw*(QA -ZA(k,j)) C C................... IF( TEST(23) .GT. 0) GO TO 1023 C C******************************************************************************* C*** KERNEL 24 FIND LOCATION OF FIRST MINIMUM IN ARRAY C******************************************************************************* C C X( n/2)= -1.000d+50 X( n/2)= -1.000d+10 C 1024 m= 1 DO 24 k= 2,n IF( X(k).LT.X(m)) m= k 24 CONTINUE C C m= imin1( n,x,1) 35 nanosec./element STACKLIBE/CRAY C................... IF( TEST(24) .NE. 0) GO TO 1024 C C******************************************************************************* C CPFM iflag1= 0 sum= 0.00d0 som= 0.00d0 DO 999 k= 1,mk sum= sum + TIME (k) TIMES(jr,il,k)= TIME (k) TERRS(jr,il,k)= TERR1(k) NPFS (jr,il,k)= NPFS1(k) CSUMS(jr,il,k)= CSUM (k) DOS (jr,il,k)= TOTAL(k) FOPN (jr,il,k)= FLOPN(k) som= som + FLOPN(k) * TOTAL(k) 999 continue C TK(1)= TK(1) + sum TK(2)= TK(2) + som C Dumpout Checksums c WRITE ( 7,706) jr, il c 706 FORMAT(1X,2I3) c WRITE ( 7,707) ( CSUM(k), k= 1,mk) c 707 FORMAT(5X,'&',1PE21.15,',',1PE21.15,',',1PE21.15,',') C CALL TRACK ('KERNEL ') RETURN END C*********************************************** SUBROUTINE PAGE( iou) C*********************************************** CALL TRACE ('PAGE ') WRITE(iou,1) 1 FORMAT(1H1) c 1 FORMAT(1H ) CALL TRACK ('PAGE ') RETURN END C C******************************************** FUNCTION RELERR( U,V) C******************************************** C C RELERR - RELATIVE ERROR BETWEEN U,V (0.,1.) C U - INPUT C V - INPUT C******************************************** C cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) DOUBLE PRECISION x, y REDUNDNT C CALL TRACE ('RELERR ') w= 0.00d0 IF( u .NE. v ) THEN w= 1.00d0 o= 1.00d0 IF( SIGN( o, u) .EQ. SIGN( o, v)) THEN a= ABS( u) b= ABS( v) x= MAX( a, b) y= MIN( a, b) IF( x .NE. 0.00d0) THEN w= 1.00d0 - y/x ENDIF ENDIF ENDIF C RELERR= w CALL TRACK ('RELERR ') RETURN END C C*********************************************************************** SUBROUTINE REPORT( iou, ntk,nek,FLOPS,TR,RATES,LSPAN,WG,OSUM,ID) C*********************************************************************** C * C REPORT - Prints Statistical Evaluation Of Fortran Kernel Timings* C * C iou - Logical Output Device Number * C ntk - Total number of Kernels to Edit in Report * C nek - Number of Effective Kernels in each set to Edit * C FLOPS - Array: Number of Flops executed by each kernel * C TR - Array: Time of execution of each kernel(microsecs) * C RATES - Array: Rate of execution of each kernel(megaflops/sec)* C LSPAN - Array: Span of inner DO loop in each kernel * C WG - Array: Weight assigned to each kernel for statistics * C OSUM - Array: Checksums of the results of each kernel * C*********************************************************************** c c REFERENCES c c F.H.McMahon, The Livermore Fortran Kernels: c A Computer Test Of The Numerical Performance Range, c Lawrence Livermore National Laboratory, c Livermore, California, UCRL-53745, December 1986. c c from: National Technical Information Service c U.S. Department of Commerce c 5285 Port Royal Road c Springfield, VA. 22161 c c J.T. Feo, An Analysis Of The Computational And Parallel c Complexity Of The Livermore Loops, PARALLEL COMPUTING c (North Holland), Vol 7(2), 163-185, (1988). c c NOTICE c c "This report was prepared as an account c of work sponsored by the United States c Government. Neither the United States c nor the United States Department of c Energy, nor any of their employees, nor c any of their contractors, subcontractors, c or their employees, makes any warranty, c express or implied, or assumes any legal c liability or responsibility for the c accuracy, completeness or usefulness of c any information, apparatus, product or c process disclosed, or represents that its c use would not infringe privateiy-owned c rights." c c Reference to a company or product name c does not impiy approval or recommendation c of the product by the University of c California or the U.S. Department of c Energy to the exclusion of others that c may be suitable. c c c Work performed under the auspices of the c U.S. Department of Energy by the Lawrence c Livermore Laboratory under contract c number W-7405-ENG-48. c c*********************************************************************** c c Abstract c c A computer performance test that measures a realistic floating-point c performance range for Fortran applications is described. A variety c of computer performance analyses may be easily carried out using this c small central processing unit (cpu) test that would be infeasible or c too costly using complete applications as benchmarks, particularly in c the developmental phase of an immature computer system. The problem c of benchmarking numerical applications sufficiently, especially on c new supercomputers, is analyzed to identify several useful roles for c the Livermore Fortran Kernal (LFK) test. The 24 LFK contain enough c samples of Fortran practice to expose many specific inefficiencies in c the formulation of the Fortran source, in the quality of compiled cpu c code, and in the capability of the instruction architecture. c Examples show how the LFK may be used to study compiled Fortran code c efficiency, to test the ability of compilers to vectorize Fortran, to c simulate mature coding of Fortran on new computers, and to estimate c the effective subrange of supercomputer performance for Fortran c applications. c c Cpu performance measurements of several Fortran benchmarks and c numerical applications that correlate well with the cpu performance c range measured by the LFK test are presented. The numerical c performance metric Mflops, first introduced in 1970 in this cpu test c to quantify the cpu performance range of numerical applications, is c discussed. Analyses of the LFK performance results argue against c reducing the cpu performance range of supercomputers to a single c number. The 24 LFK measured rates show a realistic variance in c Fortran cpu performance that is essential data for circumspect c computer evaluations. Cpu performance data measured by the LFK test c on a number of recent computer systems are tabulated for reference. c c c c I: FORTRAN CPU PERFORMANCE ANALYSIS c c c These kernels measure Fortran numerical computation rates for a c spectrum of CPU-limited computational structures or benchmarks. c The kernels benchmark contains extracts or kernels from more c than a score CPU-limited scientific application programs. These c kernels are The most important CPU time components from The c application programs. This benchmark may be easily extended c with important new kernels leaving performance statistics intact. c c The time required to convert, debug, execute and time many, c entire, large programs on new machines each having a new c implementation of Fortran, or several implementations or c dialects rapidly becomes excessive. Almost all The conversion c costs are in segments of The programs which are irrelevant for c evaluation of The CPU, e.g., I/O, Fortran variations, memory c allocation, overlays, job control, etc. all of these c complexities are reduced to a single, small benchmark which uses c a minimum of I/O and a single level of storage. further, the c computation in the kernels is the most stable part of the c Fortran language. c c The kernels benchmark is sufficient to determine a range of CPU c performance for many different computational structures in a c single computer run. Since The range in performance is usually c large the mean has a secondary significance. To estimate the c performance of a particular, CPU-limited application program c select the case(s) which are most similar to the application as c most relevent to the estimate. The performance ratio of a c kernel on two different machines or compiled by two different c compilers on the same machine will approximate the ratio of c through-puts for an application which is very similar in c structure. c c This set of kernels was chosen to measure lower and upper bounds c for scalar Fortran computation rates. The upper bound on scalar c rates serves as a base to evaluate the effectiveness of vector c computation. The kind of Fortran which has the highest MIP c rates is pure arithmetic in DO-loops where complete local code c optimization by a Fortran compiler is possible. All other kinds c of Fortran operations execute at much lower MIP rates on c multiple register machines (these ops may not be necessary). c c Through-put is measured in units of floating-point operations c executed per micro-second; called results per micro-second or c mega-flops. The Mflop is a measure of the NECESSARY results in c a scientific application program regardless of the number or c kind of operations or processing. The ratio of Mflops for two c different machines will approximate the ratio of through-puts c for the majority of compute-limited scientific applications on c the two machines. The kernels measure performance scale c factors. c c c II: FORTRAN PROGRAMMING SYSTEM MATURITY c c Hardware performance gains depend criticaly on compiler c maturity. These kernels measure the joint performance of c hardware and Fortran compiler software and may easily be used c for a comparative analysis of all the available compilers or c options on a given machine. For a new or proposed machine where c no compiler is available the performance may be estimated by c simulating a reasonable compilation. An example of simulation c rationale is given below. c c Fortran compilers for new types of machines require a lengthy c development cycle to achive an effective level of machine c utilization. A fully mature compiler may not be completed in c the first years of a new machine. Indeed, maturity is not a c stationary state but evolves with advances in program c optimization techniques. Some of these techniques depend on c special facilities in the new machines and serious development c and implementation cannot start much earlier than development of c the new machine. Assumptions on the maturity of available c Fortran compilers are crucial to the evaluation of Fortran c performance and thus, compiler characteristics should be c explicit parameters of the performance analysis. c c c ----------------------------------------------------------------------------- c III: A CPU Performance Metric For Computational Physics: Mega-Flops/sec. c ----------------------------------------------------------------------------- c c c A: Floating-Point Instructions: The Necessary Mathematics c c Computational physics applies systems of PDEs from Mathematical physics to c simulate the evolution of physical systems. The mathematical methods depend c on real valued functions and the algorithms are programmed, almost c exclusively, in Fortran Floating-point computer operations (Flops). These c floating-point operations are, unquestionably, the NECESSARY computer c operations on ANY computer and the total number is INVARIANT. Thus a c meaningful computation rate can always be measured by counting the total c number of Flops and dividing by the total execution time of a program. c c B: Procedural Machine Instructions: Artifices Of An Archetecture c c All of the non-arithmetic instructions in a machine program are artifices of c a particular hardware architecture, i.e. machine dependant, as well as the c result of a particular compiler's imperfect coding techniques. How many of c these procedural machine instructions are strictly necessary can only be c determined by further, tedious analysis which is ALWAYS machine dependant. A c famous example of software masking hardware capabilities is the PASCAL c compiler written by n.Wirth which used only 50% of the command set to c generate machine programs for the CDC-7600. c c Unless the next generation computer design is constrained for some reason, to c closely resemble its obsolete predecessor, the instruction mix used in c current machines is not necessarily relevent. Furthermore, the instruction c mix is not a definitive characterization of the intrinsic physics or the c mathematical algorithms. c c 1. Primary Memory Access Instructions c c The number of memory instructions that are necessary for a given algorithm c depends strongly on the number and kind of CPU registers and is a highly c machine dependent number. Operating registers, scratch-pad memories, vector c buffers, short-stop and feed-back paths in the cpu are examples of hardware c artifices which reduce the number of primary memory operations. Compilers c and other coders must make intelligent use of these particular cpu resources c to minimize memory operations and this is generally not the case, as is well c known. c c 2. Branching Instructions c c Branching instructions are the slowest and most expensive procedural c instructions and are very often unecessary. Here the source programmer has c primary responsibility to minimize branching in the program by avoiding IF c statements whenever possible by using MAX, MIN, or merge functions like c CSMG. Careful logical reduction and placement of IF tests is required to c minimize the execution of branching operations. Compilers can do very little c to change or optimize the branch graph specified in the source program. c c On vector computers ALL IF tests over mesh or array (state) variables can be c eliminated. Conditional computation can be vectorized by direct construction c using explicit sub-set mappings. Vector relationals replace the IF clauses. c Then sparse, one-to-one mappings called vector Compress/Decompress and c one-to-many mappings called vector Gather/Scatter are necessary and c sufficient to compose sub-vector operands for simple vector operations. c c c c c c IV: PERFORMANCE MEASUREMENTS c c c Through-put is measured in units of millions of floating-point c operations executed per second, called mflops. c c c Artificially long computer runs do not have to be contrived for c timing on machines where a cpu clock may be read in job mode. c Statistics on the accuracy of the timing method should be c measured. c c Net mflops is meaningful only if real run time of each kernel c is adjusted such that it weights the total time in proportion c to the actual usage of that catagory of computation in the c total workload. c c c c c c 1. Assignment Of Weights To Floating-Point Operations c c Weights are assigned to different kinds of floating-point c operations to normalize their hardware execution time to c addition time so that the flop rates computed for various c Fortran Kernels will be commensurable. c c +,-,* 1 c /,SQRT 4 c EXP,SIN,ETC. 8 c IF(X.REL.Y) 1 c c c Each Kernel flop-count is the weighted number of flops required for c serial execution. The scalar version defines the NECESSARY computation c generally, in the absence of proof to the contrary. The vector c or parallel executions are only credited with executing the same c necessary computation. If the parallel methods do more computation c than is necessary then the extra flops are not counted as through-put. c c c 2. SAMPLE OUTPUT: CDC-7600/FTN-4.4 c c KERNEL FLOPS TIME MFLOPS c 1 500 94.4 5.30 c 2 300 45.3 6.62 c 3 100 21.9 4.57 c 4 300 109.3 2.75 c 5 100 25.6 3.91 c 6 100 27.8 3.60 c 7 640 88.2 7.25 c 8 1440 249.0 5.78 c 9 680 123.2 5.52 c 10 360 102.8 3.50 c 11 49 34.8 1.41 c 12 49 18.3 2.68 c 13 224 107.7 2.08 c 14 3300 809.3 4.08 c 15 3960 1769.5 2.24 c 16 530 320.3 1.65 c 17 405 92.2 4.39 c 18 6600 1121.5 5.88 c 19 540 105.8 5.11 c 20 1300 266.0 4.89 c 21 1250 370.9 3.37 c 22 1700 601.9 2.82 c 23 1650 362.4 4.55 c 24 200 171.7 1.16 c c AVERAGE RATE = 3.96 MEGA-FLOPS/SEC. c MEDIAN RATE = 4.08 MEGA-FLOPS/SEC. c HARMONIC MEAN = 3.15 MEGA-FLOPS/SEC. c STANDARD DEV. = 1.61 MEGA-FLOPS/SEC. c c F.H.MCMAHON 1972 c c c c c c c 3. INTERPRETATION OF OUTPUT FILE FROM SUBROUTINE REPORT: c c c c The highly instrumented LFK test program measures the effective cpu c performance range and has sufficient timed samples for many statisical c analyses thus avoiding the PERIL of a SINGLE performance "rating". c A COMPLETE REPORT OF LFK TEST RESULTS MUST QUOTE THE PERFORMANCE RANGE c STATISTICS BASED ON THE SUMMARY OF 72 TIMED SAMPLES: the minium, c the equi-weighted harmonic, geometric, and arithmetic means and the maximum c rates. The standard deviation must also be quoted to show the variance c in performance rates. NO SINGLE RATE QUOTATION IS SUFFICIENT OR HONEST. c c The LFK test (Livermore loops) outputs data for three benchmarking contexts c following print-outs of cpu clock checks and experimental timing errors: c c c c 1. Conventional "Balanced" Cpus, e.g. PCs, DEC-VAXs, IBM-370s. c c 1.1. [Refer to SUMMARY of 72 timings on pp.9-10 of LFK test OUTPUT file. c The bottom line is the set of nine performance range statistics c min thru max plus standard deviation listed after SUMMARY table. c These statistics may be used for computer comparisons as shown c in figure 11, p.24 of the LFK report UCRL-53745. Ratios of the c range statistics from two computers show the range of speed-ups.] c c 1.2. An all-scalar coded LFK test (NOVECTOR) measures the basal scalar, c mono-processor computing capability. c c c c 2. Vector "Unbalanced" Cpus, e.g. CRAY, NEC, IBM-3090. c c 2.1. [Pages 2-8 of the LFK test OUTPUT file analyzes three different c runs of the 24 Livermore loops with short, medium, and long DO c loop spans (vector lengths). The performance range statistics c for each of these three runs on vector computers should be compared c as shown in figure 12, p.25 of the LFK report UCRL-53745.] c c 2.2 The performance rates of most applications on vector computers are c observed in a sub-range from approximately the harmonic mean through c the mean rate of the 24 LFK samples (thru the two middle quartiles). c c 2.2.1 The equi-weighted arithmetic mean (AM) of 72 LFK rates c correlates with highly vectorised applications in the workload, c (80%-90% of flops) because the average is dominated by the high c vector rates. Very highly vectorised applications (95%-99%+) c may run several times the average rate (figure 10, p21, ibid). c c 2.2.2 The equi-weighted harmonic mean (HM) of 72 LFK rates c correlates with poorly vectorised applications in the workload, c (30%-40% of flops) because the HM is dominated by the low c scalar rates. An all-scalar coded LFK test (NOVECTOR) c measures the basal scalar, mono-processor computing capability. c c 2.2.3 The best central measure is the Geometric Mean(GM) of 72 rates, c because it is least biased by outliers. CRAY hardware monitors c have demonstrated net Mflop rates for the LLNL and UCSD c workloads are closest to the 72 LFK test geometric mean rate. c c c c 3. Parallel "Unbalanced" Cpus, e.g. CRAY, NEC, IBM-3090. c c 3.1. The lower, uni-processor bound of an MP system is given by 1.2. c c 3.2. The upper, multi-processor bound of an MP system is estimated by c multiplying the LFK performance statistics from 1.2 or from 2.2. c by N, the number of processors. c c c c c Comparision of two or more computers should make use of all the c performance range statistics in the tables below ( DO span= 167): c the extrema, the mean rates, and the standard deviation. c NO SINGLE MFLOPS RATE QUOTATION IS SUFFICIENT OR HONEST. c If the performance range is very large the causes and implications should c be fully explored. Use of a single mean statistic is insufficient c but may be valid if the three mean rates are close in value and the c standard deviation is relatively small. The geometric mean is a c better central measure than the median which depends on one value c in a small set. The least biased central measure is the geometric c mean because it is less sensitive to outliers than either the average c or the harmonic mean. When the computer performance range is very c large the net Mflops rates of many Fortran programs and workloads c have been observed to be in the sub-range between the equi-weighted c harmonic and arithmetic means depending on the degree of code c parallelism and optimization(Ref. 1). Note that LFK mean Mflops rates c also imply the average efficiency of a computing system since c the peak rate is a well known constant. c c The performance data shown for the computers below will be subject to c change with time. Effective Cpu performance may improve as the programming c system software matures or effective performance may regress when the system c is oversubscribed. We have observed degraded performance for the LFK test c in virtual storage systems when the working set size was too small, and in c multiprogramming or multiprocessing systems which were either immature or c very active. In these active environments the LFK test measures a real c Cpu degradation in the effectiveness of caching data and data access c generally. It is necessary to run the LFK test stand-alone to have c reproducable performance measurements. c c The performance data sets tabulated below which have 72 sample c timings are a combination of three 24 sample sets produced by the c LFK test. Statistics on the 72 sample data set are more significant c and these statistics should be quoted ( DO span= 167). c c c c c c c REFERENCES c c F.H.McMahon, The Livermore Fortran Kernels: c A Computer Test Of The Numerical Performance Range, c Lawrence Livermore National Laboratory, c Livermore, California, UCRL-53745, December 1986. c c from: National Technical Information Service c U.S. Department of Commerce c 5285 Port Royal Road c Springfield, VA. 22161 c c c F.H.McMahon, "The Livermore Fortran Kernels Test of the Numerical c Performance Range", in Performance Evaluation of Supercomputers c (J.L.Martin, ed., North Holland, Amsterdam), 143-186(1988). c c c J.T. Feo, An Analysis Of The Computational And Parallel c Complexity Of The Livermore Loops, PARALLEL COMPUTING c (North Holland), Vol 7(2), 163-185, (1988). c c c F.H.McMahon, "Measuring the Performance of Supercomputers", c in Energy and Technology Review (A.J.Poggio,ed.), c Lawrence Livermore National Laboratory, UCRL-52000-88-5, (1988). c c c c c The range of speed-ups shown below as ratios of the performance c statistics has a small variance compared to the enormous c performance ranges; the range of speed-ups are convergent estimates. c Report all nine performance range statistics on 72 samples, e.g.: c c c c c D.117 LFK Test 117.1 117.2 117.3 117.4 117.5 117.6 c ------------- ---------- ---------- ---------- ---------- ---------- --------- c Vendor CRAY RI CRAY RI CRAY RI CDC IBM NEC c Model XMP1 8.5 YMP1 2 ETA10-G 3090S180 SX-2 c OSystem COS 1.16 COS 1.16 UNICOS EOS1.2J2 MVS2.2.0 SXOS1.21 c Compiler CFT771.2 CFT771.2 CFT771.3 F200 690 VSF2.3.0 F77/SX24 c OptLevel Vector Vector Vector VAST2.25 Vector Vector c NR.Procs 1 1 1 1 1 1 c Samples 72 72 72 72 72 72 c WordSize 64 64 64 64 64 64 c DO Span 167 167 167 167 167 167 c Year 1987 1988 1988 1988 1989 1986 c Kernel/MFlops--------- ---------- ---------- ---------- ---------- --------- c 1 183.57 258.64 160.17 405.57 56.03 800.05 c 2 42.49 67.09 21.61 12.55 8.88 49.94 c 3 173.19 236.67 111.93 233.09 53.66 528.67 c 4 65.68 95.05 47.45 59.48 40.72 164.18 c 5 15.89 18.69 13.01 11.86 8.83 11.26 c 6 12.91 20.58 13.07 13.13 8.57 29.30 c 7 207.28 295.48 228.00 488.07 62.08 1042.33 c 8 149.44 232.41 189.47 242.77 46.19 415.68 c 9 178.50 251.07 195.24 186.88 61.70 705.28 c 10 78.50 111.42 73.20 82.68 8.57 120.75 c 11 12.02 16.52 12.39 7.11 6.84 8.32 c 12 81.14 112.50 57.52 227.40 18.18 242.80 c 13 5.89 7.35 4.83 5.66 4.12 16.78 c 14 22.48 31.90 19.08 11.56 11.08 25.79 c 15 6.24 7.78 7.58 75.87 4.93 8.73 c 16 7.28 8.62 5.06 2.53 5.27 9.85 c 17 11.70 14.92 10.29 8.38 10.65 17.89 c 18 126.84 203.76 127.63 160.39 37.13 349.42 c 19 16.74 20.63 13.70 9.69 11.58 13.40 c 20 14.56 18.76 13.51 8.13 9.75 16.12 c 21 117.63 168.79 58.97 138.42 19.62 253.03 c 22 75.96 103.46 95.34 54.32 17.04 183.34 c 23 15.34 17.71 10.46 20.22 13.97 20.52 c 24 3.60 4.58 2.66 28.60 3.95 4.59 c ------------- .... .... .... .... .... .... c PM Correlation = 1.00 1.00 0.97 0.90 0.95 0.93 c Standard Dev. = 59.92 86.75 61.18 89.09 16.32 219.72 c c Maximum Rate = 207.28 295.48 228.00 488.07 62.08 1042.33 c Quartile Q3 = 78.59 111.42 73.20 78.61 19.20 156.56 c Average Rate = 55.39 78.23 49.70 64.38 17.56 139.95 c Geometric Mean = 27.57 36.63 22.61 26.39 12.23 43.94 c Median Q2 = 16.74 20.63 13.77 19.82 10.06 24.16 c Harmonic Mean = 13.95 17.66 11.26 12.25 9.02 19.07 c Quartile Q1 = 11.70 14.75 8.34 8.39 6.99 11.44 c Minimum Rate = 2.20 2.85 2.01 2.25 2.43 4.47 c c Maxima Ratio= 1.00 1.43 1.10 2.35 0.30 5.03 c Average Ratio= 1.00 1.41 0.90 1.16 0.32 2.53 c Geometric Ratio= 1.00 1.33 0.82 0.96 0.44 1.59 c Harmonic Ratio= 1.00 1.27 0.81 0.88 0.65 1.37 c Minima Ratio= 1.00 1.30 0.91 1.02 1.10 2.03 c c The range of speed-ups shown above as ratios of the performance c statistics has a small variance compared to the enormous c performance ranges; the range of speed-ups are convergent estimates. c More accurate projection of a cpu workload rate may be c computed by assigning appropriate weights for each kernel. c c The upper bound for Fortran performance of a parallel c N-processor system is given by multiplying the seven range c statistics from a uni-processor LFK test (2.2) by N. c c D.118 LFK Test 118.1 118.2 118.3 118.4 118.5 118.6 c ------------- ---------- ---------- ---------- ---------- ---------- --------- c Vendor CRAY RI CRAY RI CRAY RI CRAY RI CRAY RI CRAY RI c Model YMP1modY YMP1modY YMP/832 YMP/832 YMP/832 YMP/832 c OSystem NLTSS NLTSS UNICOS UNICOS UNICOS UNICOS c Compiler CFT77 3. CFT77 3. CF77 4.0 CF77 4.0 CF77 4.0 CF77 4.0 c OptLevel Scalar Vector vector vector vector vector c NR.Procs 1 1 1 2 4 8 c Samples 72 72 72 72 72 72 c WordSize 64 64 64 64 64 64 c DO Span 167 167 167 167 167 167 c Year 1989 1989 1990 1990 1990 1990 c Kernel/MFlops--------- ---------- ---------- ---------- ---------- --------- c 1 23.33 258.08 188.23 364.86 535.99 581.75 c 2 14.26 68.12 64.45 64.86 65.59 64.08 c 3 25.05 232.20 236.81 236.93 233.45 236.86 c 4 22.92 92.14 89.72 110.24 160.77 156.70 c 5 19.44 19.59 19.30 19.64 19.59 19.65 c 6 9.24 21.15 20.76 21.07 20.93 20.86 c 7 32.83 291.31 274.07 521.69 896.68 1308.07 c 8 30.00 229.89 188.78 264.72 262.94 266.89 c 9 31.23 240.88 169.97 225.10 219.31 243.47 c 10 18.53 108.73 106.66 112.78 108.76 108.58 c 11 19.73 19.75 37.87 38.66 38.52 37.93 c 12 16.95 135.81 126.99 130.52 125.68 130.49 c 13 6.73 6.74 20.77 21.16 20.89 21.18 c 14 9.71 29.98 29.04 35.15 38.77 40.81 c 15 7.55 7.55 32.53 52.47 73.84 127.58 c 16 8.42 8.34 8.38 8.44 8.34 8.44 c 17 13.47 13.84 15.70 15.89 15.88 15.89 c 18 24.84 199.36 179.98 293.24 410.87 526.41 c 19 20.28 20.34 20.07 20.37 20.27 20.37 c 20 18.27 18.50 17.84 17.98 18.03 18.05 c 21 20.53 160.40 278.54 439.90 776.14 1268.94 c 22 8.74 106.25 86.52 132.58 131.62 129.79 c 23 19.53 20.16 36.35 36.65 36.75 36.79 c 24 3.85 3.93 38.04 38.82 38.58 38.80 c ------------- .... .... .... .... .... .... c Standard Dev. = 7.93 85.18 78.37 113.05 171.34 246.63 c c Maximum Rate = 32.83 291.31 278.54 521.69 896.68 1308.07 c Quartile Q3 = 20.53 109.15 116.42 120.27 125.70 128.95 c Average Rate = 16.65 77.30 75.88 92.90 113.89 136.32 c Geometric Mean = 14.58 36.50 41.43 45.11 48.00 49.09 c Median Q2 = 16.95 21.15 32.25 36.53 36.75 36.79 c Harmonic Mean = 12.40 17.27 22.69 23.48 24.12 23.58 c Quartile Q1 = 8.76 13.84 16.56 16.74 17.94 17.13 c Minimum Rate = 3.73 2.90 2.82 2.87 2.86 2.83 c c Maxima Ratio= 1.00 8.87 8.48 15.89 27.31 39.84 c Average Ratio= 1.00 4.64 4.56 5.58 6.84 8.19 c Geometric Ratio= 1.00 2.50 2.84 3.09 3.29 3.37 c Harmonic Ratio= 1.00 1.39 1.83 1.89 1.95 1.90 c Minima Ratio= 1.00 0.78 0.76 0.77 0.77 0.76 c c c c c The parallel complexity and parallel techniques for the LFK c test are described in the following reference: c c J.T.Feo, An Analysis of the Computational and c Parallel Complexity of the Livermore Loops, c PARALLEL COMPUTING 7(2), 163-185(1988). c c c c c c c c 4. SAMPLE OUTPUT FILE FROM SUBROUTINe REPORT: (CRAY-YMP832/CFT77 Compiler) c aus c c Output file for the Mono-processed Standard Benchmark Test: c The following output was uni-processed on CRAY-YMP832 in a c fully loaded, multi-processing, multi-programming system: c c c >>> USE 72 SAMPLES LFK TEST RESULTS SUMMARY (line 700+) c >>> USE ALL RANGE STATISTICS FOR OFFICIAL QUOTATIONS. c SECOVT: 16000 5.0567e-05 1.0000 c SECOVT: 32000 5.0555e-05 0.0002 c VERIFY: 200 5.0885e-05 = Time Resolution of Cpu-timer c c VERIFY ADEQUATE Loop SIZE VERSUS CPU CLOCK ACCURACY c ----- ------- ------- ------- -------- c EXTRA MAXIMUM DIGITAL DYNAMIC RELATIVE c Loop CPUTIME CLOCK CLOCK TIMING c SIZE SECONDS ERROR ERROR ERROR c ----- ------- ------- ------- -------- c 256 4.0944e-04 0.00% 0.84% 0.66% c 512 8.1144e-04 0.00% 0.42% 0.66% c 1024 1.6184e-03 0.00% 0.22% 0.54% c 2048 3.2344e-03 0.00% 0.13% 0.66% c 4096 6.4544e-03 0.00% 0.56% 0.00% c 6800 Repetition Count = MULTI * Loops2 = 50.000 c 8192 1.2917e-02 0.00% 0.53% 0.09% c 16384 2.5677e-02 0.00% 0.25% 0.25% c 32768 5.1674e-02 0.00% 0.56% 0.11% c 65536 1.0320e-01 0.00% 0.28% 0.11% c ----- ------- ------- ------- -------- c c c CLOCK CALIBRATION TEST OF INTERNAL CPU-TIMER: SECOND c MONOPROCESS THIS TEST, STANDALONE, NO TIMESHARING. c VERIFY TIMED INTERVALS SHOWN BELOW USING EXTERNAL CLOCK c START YOUR STOPWATCH NOW ! c c Verify T or DT observe external clock: c c ------- ------- ------ ----- c Total T ? Delta T ? Mflops ? Flops c ------- ------- ------ ----- c 1 9.70 9.70 65.84 6.38411e+08 c 2 19.38 9.68 65.89 1.27682e+09 c 3 29.19 9.82 65.60 1.91523e+09 c 4 38.98 9.78 65.52 2.55364e+09 c ------- ------- ------ ----- c END CALIBRATION TEST. c c c ESTIMATED TOTAL JOB CPU-TIME:= 98.917 sec. ( Nruns= 7 Trials) c c c Trial= 1 ChkSum= 908 Pass= 0 Fail= 0 c Trial= 2 ChkSum= 908 Pass= 1 Fail= 0 c Trial= 3 ChkSum= 908 Pass= 2 Fail= 0 c Trial= 4 ChkSum= 908 Pass= 3 Fail= 0 c Trial= 5 ChkSum= 908 Pass= 4 Fail= 0 c Trial= 6 ChkSum= 908 Pass= 5 Fail= 0 c Trial= 7 ChkSum= 908 Pass= 6 Fail= 0 c1 c c c time TEST overhead (t err): c c RUN AVERAGE STANDEV MINIMUM MAXIMUM c TICK 1 9.856583e-07 7.917129e-10 c TICK 2 9.827836e-07 3.459393e-10 c TICK 3 9.845331e-07 4.918561e-10 c TICK 4 9.858521e-07 1.222940e-09 c TICK 5 9.843086e-07 3.900581e-12 c TICK 6 9.848147e-07 6.017975e-10 c TICK 7 9.839837e-07 1.912898e-10 c DATA 7 9.998664e-02 5.433200e-07 9.998564e-02 9.998765e-02 c DATA 7 9.998599e-02 9.174233e-07 9.998434e-02 9.998765e-02 c TICK 7 9.845620e-07 9.630494e-10 9.827836e-07 9.858521e-07 c c c THE EXPERIMENTAL TIMING ERRORS FOR ALL 7 RUNS c -- --------- --------- --------- ----- ----- --- c k T min T avg T max T err tick P-F c -- --------- --------- --------- ----- ----- --- c 1 2.7669e-02 2.7708e-02 2.7761e-02 0.13% 0.00% 0 c 2 1.0227e-01 1.0274e-01 1.0327e-01 0.31% 0.00% 0 c 3 1.5476e-02 1.5608e-02 1.5690e-02 0.40% 0.00% 0 c 4 4.1177e-02 4.1403e-02 4.1745e-02 0.52% 0.00% 0 c 5 3.6697e-01 3.6710e-01 3.6722e-01 0.02% 0.00% 0 c 6 1.1576e-01 1.1602e-01 1.1629e-01 0.18% 0.00% 0 c 7 4.3866e-02 4.3928e-02 4.4012e-02 0.11% 0.00% 0 c 8 6.5278e-02 6.5553e-02 6.6188e-02 0.45% 0.00% 0 c 9 5.4051e-02 5.4393e-02 5.4880e-02 0.65% 0.00% 0 c 10 5.7777e-02 5.8703e-02 5.9561e-02 1.20% 0.00% 0 c 11 2.8525e-01 2.8528e-01 2.8531e-01 0.01% 0.00% 0 c 12 2.2396e-02 2.2675e-02 2.3112e-02 0.96% 0.00% 0 c 13 1.5454e-01 1.5542e-01 1.5671e-01 0.53% 0.00% 0 c 14 1.4662e-01 1.4694e-01 1.4733e-01 0.17% 0.00% 0 c 15 4.4328e-01 4.4352e-01 4.4394e-01 0.05% 0.00% 0 c 16 3.3733e-01 3.3750e-01 3.3766e-01 0.03% 0.00% 0 c 17 4.6434e-01 4.6448e-01 4.6475e-01 0.03% 0.00% 0 c 18 4.6521e-02 4.6617e-02 4.6883e-02 0.26% 0.00% 0 c 19 5.6179e-01 5.6192e-01 5.6215e-01 0.02% 0.00% 0 c 20 3.1377e-01 3.1387e-01 3.1395e-01 0.02% 0.00% 0 c 21 1.9713e-01 1.9862e-01 1.9933e-01 0.36% 0.00% 0 c 22 3.7298e-02 3.7309e-02 3.7319e-02 0.02% 0.00% 0 c 23 4.8072e-01 4.8090e-01 4.8128e-01 0.04% 0.00% 0 c 24 2.5737e-02 2.5783e-02 2.5863e-02 0.14% 0.00% 0 c -- --------- --------- --------- ----- ----- --- c c c NET CPU TIMING VARIANCE (T err); A few % is ok: c c AVERAGE STANDEV MINIMUM MAXIMUM c Terr 0.28% 0.31% 0.01% 1.20% c c c c c c c c c c c c c1 c ******************************************** c THE LIVERMORE FORTRAN KERNELS: M F L O P S c ******************************************** c c Computer : CRAY-YMP (6.0ns) c System : NLTSS fully loaded c Compiler : CFT77 4.0.3.4 c Date : 91.07.14 c Mean DO Span = 471 c When the computer performance range is very large c the net Mflops rate of many Fortran programs and c workloads will be in the sub-range between the equi- c weighted Harmonic and Arithmetic means depending c on the degree of code parallelism and optimization. c The least biased central measure is the Geometric c Mean of 72 rates, quoted +- a standard deviation. c Mean Mflops rates imply the average efficiency of a c computing system since the peak rate is well known. c LFK test measures a lower bound for a Multi-processor c and N * LFK rates project an upper bound for N-procs. c c KERNEL FLOPS MICROSEC MFLOP/SEC SPAN WEIGHT CHECK-SUMS OK c ------ ----- -------- --------- ---- ------ ---------------------- -- c 1 7.0070e+06 2.7708e+04 252.8850 1001 1.00 3.5802568852572702e+05 14 c 2 5.1992e+06 1.0274e+05 50.6078 101 1.00 1.0778052681679546e+04 13 c 3 3.6036e+06 1.5608e+04 230.8880 1001 1.00 7.0052001814661253e+01 13 c 4 3.3600e+06 4.1403e+04 81.1541 1001 1.00 4.1994754168318025e+00 14 c 5 4.0000e+06 3.6710e+05 10.8963 1001 1.00 3.1842101496719639e+04 13 c 6 2.3808e+06 1.1602e+05 20.5205 64 1.00 3.0625814413198270e+04 12 c 7 1.2736e+07 4.3928e+04 289.9310 995 1.00 4.2729757526224293e+05 14 c 8 1.4256e+07 6.5553e+04 217.4721 100 1.00 1.0508876039390042e+06 12 c 9 1.2362e+07 5.4393e+04 227.2807 101 1.00 8.3261052698255703e+05 13 c 10 6.1812e+06 5.8703e+04 105.2963 101 1.00 5.1172588490281440e+05 13 c 11 2.2000e+06 2.8528e+05 7.7117 1001 1.00 2.3400376808530903e+08 12 c 12 2.4000e+06 2.2675e+04 105.8436 1000 1.00 2.0349990127721540e-04 7 c 13 3.2256e+06 1.5542e+05 20.7546 64 1.00 8.4177377140212891e+11 9 c 14 4.4044e+06 1.4694e+05 29.9742 1001 1.00 2.2158871308010742e+10 12 c 15 3.3000e+06 4.4352e+05 7.4405 101 1.00 2.7606716832465865e+05 13 c 16 2.6500e+06 3.3750e+05 7.8518 75 1.00 3.9555320000000000e+06 16 c 17 6.3630e+06 4.6448e+05 13.6991 101 1.00 7.8024924103214871e+03 12 c 18 8.7120e+06 4.6617e+04 186.8842 100 1.00 7.1100892625153065e+05 13 c 19 4.7268e+06 5.6192e+05 8.4119 101 1.00 3.7952718721052370e+03 12 c 20 5.2000e+06 3.1387e+05 16.5676 1000 1.00 2.1284510375197506e+08 11 c 21 2.5250e+07 1.9862e+05 127.1262 101 1.00 1.1181157964903107e+09 11 c 22 3.7774e+06 3.7309e+04 101.2451 101 1.00 2.0570230635969638e+03 13 c 23 8.7120e+06 4.8090e+05 18.1160 100 1.00 2.4849303510962054e+05 12 c 24 1.0000e+06 2.5783e+04 38.7847 1001 1.00 3.5000000000000000e+03 16 c ------ ----- -------- --------- ---- ------ ---------------------- -- c 24 1.5301e+08 4.4140e+06 34.6643 471 300 c c MFLOPS RANGE: REPORT ALL RANGE STATISTICS: c Maximum Rate = 289.9310 Mega-Flops/Sec. c Quartile Q3 = 157.0052 Mega-Flops/Sec. c Average Rate = 90.7226 Mega-Flops/Sec. c Geometric Mean = 45.9242 Mega-Flops/Sec. c Median Q2 = 44.6962 Mega-Flops/Sec. c Harmonic Mean = 23.0425 Mega-Flops/Sec. c Quartile Q1 = 15.1334 Mega-Flops/Sec. c Minimum Rate = 7.4405 Mega-Flops/Sec. c c c Standard Dev. = 91.2693 Mega-Flops/Sec. c Avg Efficiency = 15.84% Program & Processor c Mean Precision = 12.50 Decimal Digits c1 c c c c c c c SENSITIVITY ANALYSIS c c c The sensitivity of the harmonic mean rate (Mflops) c to various weightings is shown in the table below. c Seven work distributions are generated by assigning c two distinct weights to ranked kernels by quartiles. c Forty nine possible cpu workloads are then evaluated c using seven sets of values for the total weights: c c c ------ ------ ------ ------ ------ ------ ------ c 1st QT: O O O O O X X c 2nd QT: O O O X X X O c 3rd QT: O X X X O O O c 4th QT: X X O O O O O c ------ ------ ------ ------ ------ ------ ------ c Total c Weights Net Mflops: c X O c ---- ---- c c 1.00 0.00 8.89 12.68 22.09 35.25 87.25 126.51 230.03 c c 0.95 0.05 9.27 13.27 22.15 33.48 73.58 87.31 143.87 c c 0.90 0.10 9.68 13.93 22.21 31.88 63.61 66.65 104.67 c c 0.80 0.20 10.63 15.46 22.34 29.09 50.05 45.24 67.75 c c 0.70 0.30 11.78 17.36 22.46 26.75 41.26 34.25 50.08 c c 0.60 0.40 13.22 19.80 22.59 24.76 35.09 27.55 39.72 c c 0.50 0.50 15.05 23.04 22.72 23.04 30.53 23.04 32.92 c ---- ---- c ------ ------ ------ ------ ------ ------ ------ c c c c c c c SENSITIVITY OF NET MFLOPS RATE TO USE OF OPTIMAL FORTRAN CODE(SISD/SIMD MODEL) c c 12.68 15.63 20.38 29.27 37.44 51.93 84.73 123.85 230.03 c c 0.00 0.20 0.40 0.60 0.70 0.80 0.90 0.95 1.00 c Fraction Of Operations Run At Optimal Fortran Rates c c c1 c c c time TEST overhead (t err): c c RUN AVERAGE STANDEV MINIMUM MAXIMUM c TICK 1 9.856583e-07 7.917129e-10 c TICK 2 9.827836e-07 3.459393e-10 c TICK 3 9.845331e-07 4.918561e-10 c TICK 4 9.858521e-07 1.222940e-09 c TICK 5 9.843086e-07 3.900581e-12 c TICK 6 9.848147e-07 6.017975e-10 c TICK 7 9.839837e-07 1.912898e-10 c DATA 7 9.998664e-02 5.433200e-07 9.998564e-02 9.998765e-02 c DATA 7 9.998599e-02 9.174233e-07 9.998434e-02 9.998765e-02 c TICK 7 9.845620e-07 9.630494e-10 9.827836e-07 9.858521e-07 c c c THE EXPERIMENTAL TIMING ERRORS FOR ALL 7 RUNS c -- --------- --------- --------- ----- ----- --- c k T min T avg T max T err tick P-F c -- --------- --------- --------- ----- ----- --- c 1 4.0964e-02 4.1146e-02 4.1528e-02 0.43% 0.00% 0 c 2 1.2248e-01 1.2274e-01 1.2312e-01 0.16% 0.00% 0 c 3 6.0446e-02 6.0540e-02 6.0602e-02 0.10% 0.00% 0 c 4 2.5181e-01 2.5194e-01 2.5210e-01 0.04% 0.00% 0 c 5 4.1136e-01 4.1142e-01 4.1148e-01 0.01% 0.00% 0 c 6 2.2587e-01 2.2615e-01 2.2647e-01 0.08% 0.00% 0 c 7 5.2859e-02 5.3120e-02 5.3446e-02 0.43% 0.00% 0 c 8 7.8265e-02 7.8555e-02 7.9045e-02 0.35% 0.00% 0 c 9 6.2854e-02 6.3375e-02 6.3858e-02 0.55% 0.00% 0 c 10 6.3650e-02 6.4887e-02 6.6192e-02 1.29% 0.00% 0 c 11 3.4608e-01 3.4615e-01 3.4623e-01 0.01% 0.00% 0 c 12 3.3683e-02 3.3878e-02 3.4230e-02 0.47% 0.00% 0 c 13 2.0237e-01 2.0332e-01 2.0461e-01 0.35% 0.00% 0 c 14 1.5414e-01 1.5473e-01 1.5509e-01 0.20% 0.00% 0 c 15 8.8648e-01 8.8713e-01 8.8768e-01 0.04% 0.00% 0 c 16 3.9403e-01 3.9427e-01 3.9466e-01 0.05% 0.00% 0 c 17 5.3069e-01 5.3093e-01 5.3158e-01 0.05% 0.00% 0 c 18 4.6512e-02 4.6655e-02 4.7000e-02 0.33% 0.00% 0 c 19 6.6284e-01 6.6303e-01 6.6350e-01 0.03% 0.00% 0 c 20 5.0282e-01 5.0312e-01 5.0355e-01 0.04% 0.00% 0 c 21 2.6824e-01 2.7087e-01 2.7489e-01 0.97% 0.00% 0 c 22 4.7450e-02 4.7480e-02 4.7510e-02 0.04% 0.00% 0 c 23 6.0078e-01 6.0143e-01 6.0233e-01 0.10% 0.00% 0 c 24 8.3666e-02 8.3784e-02 8.4103e-02 0.18% 0.00% 0 c -- --------- --------- --------- ----- ----- --- c c c NET CPU TIMING VARIANCE (T err); A few % is ok: c c AVERAGE STANDEV MINIMUM MAXIMUM c Terr 0.26% 0.31% 0.01% 1.29% c c c c c c c c c c c c c1 c ******************************************** c THE LIVERMORE FORTRAN KERNELS: M F L O P S c ******************************************** c c Computer : CRAY-YMP (6.0ns) c System : NLTSS fully loaded c Compiler : CFT77 4.0.3.4 c Date : 91.07.14 c Mean DO Span = 90 c When the computer performance range is very large c the net Mflops rate of many Fortran programs and c workloads will be in the sub-range between the equi- c weighted Harmonic and Arithmetic means depending c on the degree of code parallelism and optimization. c The least biased central measure is the Geometric c Mean of 72 rates, quoted +- a standard deviation. c Mean Mflops rates imply the average efficiency of a c computing system since the peak rate is well known. c LFK test measures a lower bound for a Multi-processor c and N * LFK rates project an upper bound for N-procs. c c KERNEL FLOPS MICROSEC MFLOP/SEC SPAN WEIGHT CHECK-SUMS OK c ------ ----- -------- --------- ---- ------ ---------------------- -- c 1 8.0800e+06 4.1146e+04 196.3722 101 2.00 3.6773413452565728e+03 16 c 2 6.2080e+06 1.2274e+05 50.5788 101 2.00 1.0778052681679546e+04 13 c 3 4.2824e+06 6.0540e+04 70.7366 101 2.00 7.0681900560541635e+00 13 c 4 3.3600e+06 2.5194e+05 13.3367 101 2.00 4.1994754168318025e+00 14 c 5 4.4000e+06 4.1142e+05 10.6948 101 2.00 3.2123223577214776e+02 13 c 6 2.6880e+06 2.2615e+05 11.8860 32 2.00 6.0421729517419226e+02 12 c 7 1.4221e+07 5.3120e+04 267.7098 101 2.00 4.4419104210488440e+03 14 c 8 1.7107e+07 7.8555e+04 217.7736 100 2.00 1.0508876039390042e+06 12 c 9 1.4423e+07 6.3375e+04 227.5796 101 2.00 8.3261052698255703e+05 13 c 10 6.9084e+06 6.4887e+04 106.4682 101 2.00 5.1172588490281440e+05 13 c 11 2.5600e+06 3.4615e+05 7.3957 101 2.00 2.4034922852330748e+05 14 c 12 2.7200e+06 3.3878e+04 80.2871 100 2.00 4.9892984137045460e-05 8 c 13 3.6736e+06 2.0332e+05 18.0678 32 2.00 6.8714714682226172e+11 10 c 14 4.4440e+06 1.5473e+05 28.7211 101 2.00 2.1279884256031895e+08 12 c 15 6.6000e+06 8.8713e+05 7.4397 101 2.00 2.7606716832465865e+05 13 c 16 3.0240e+06 3.9427e+05 7.6699 40 2.00 4.5362870000000000e+06 16 c 17 7.2720e+06 5.3093e+05 13.6968 101 2.00 7.8024924103214871e+03 12 c 18 8.7120e+06 4.6655e+04 186.7309 100 2.00 7.1100892625153065e+05 13 c 19 5.5752e+06 6.6303e+05 8.4086 101 2.00 3.7952718721052370e+03 12 c 20 8.3200e+06 5.0312e+05 16.5369 100 2.00 2.1883436251674779e+05 12 c 21 2.5000e+07 2.7087e+05 92.2937 50 2.00 5.4771674139930725e+08 11 c 22 4.8076e+06 4.7480e+04 101.2550 101 2.00 2.0570230635969638e+03 13 c 23 1.0890e+07 6.0143e+05 18.1067 100 2.00 2.4849303510962054e+05 12 c 24 1.2400e+06 8.3784e+04 14.7999 101 2.00 3.5000000000000000e+02 16 c ------ ----- -------- --------- ---- ------ ---------------------- -- c 24 1.7652e+08 6.1406e+06 28.7455 90 307 c c MFLOPS RANGE: REPORT ALL RANGE STATISTICS: c Maximum Rate = 267.7098 Mega-Flops/Sec. c Quartile Q3 = 103.8616 Mega-Flops/Sec. c Average Rate = 73.9394 Mega-Flops/Sec. c Geometric Mean = 36.2408 Mega-Flops/Sec. c Median Q2 = 23.4139 Mega-Flops/Sec. c Harmonic Mean = 19.7105 Mega-Flops/Sec. c Quartile Q1 = 12.6114 Mega-Flops/Sec. c Minimum Rate = 7.3957 Mega-Flops/Sec. c c c Standard Dev. = 81.6635 Mega-Flops/Sec. c Avg Efficiency = 12.50% Program & Processor c Mean Precision = 12.79 Decimal Digits c1 c c c c c c c SENSITIVITY ANALYSIS c c c The sensitivity of the harmonic mean rate (Mflops) c to various weightings is shown in the table below. c Seven work distributions are generated by assigning c two distinct weights to ranked kernels by quartiles. c Forty nine possible cpu workloads are then evaluated c using seven sets of values for the total weights: c c c ------ ------ ------ ------ ------ ------ ------ c 1st QT: O O O O O X X c 2nd QT: O O O X X X O c 3rd QT: O X X X O O O c 4th QT: X X O O O O O c ------ ------ ------ ------ ------ ------ ------ c Total c Weights Net Mflops: c X O c ---- ---- c c 1.00 0.00 8.61 11.08 15.52 24.57 58.89 89.25 184.27 c c 0.95 0.05 8.95 11.59 15.74 23.97 52.00 65.97 118.38 c c 0.90 0.10 9.31 12.14 15.97 23.41 46.55 52.33 87.20 c c 0.80 0.20 10.14 13.43 16.45 22.36 38.49 37.01 57.11 c c 0.70 0.30 11.12 15.03 16.96 21.40 32.81 28.63 42.46 c c 0.60 0.40 12.31 17.05 17.50 20.52 28.59 23.35 33.79 c c 0.50 0.50 13.79 19.71 18.08 19.71 25.33 19.71 28.06 c ---- ---- c ------ ------ ------ ------ ------ ------ ------ c c c c c c c SENSITIVITY OF NET MFLOPS RATE TO USE OF OPTIMAL FORTRAN CODE(SISD/SIMD MODEL) c c 11.08 13.64 17.75 25.41 32.39 44.65 71.89 103.43 184.27 c c 0.00 0.20 0.40 0.60 0.70 0.80 0.90 0.95 1.00 c Fraction Of Operations Run At Optimal Fortran Rates c c c1 c c c time TEST overhead (t err): c c RUN AVERAGE STANDEV MINIMUM MAXIMUM c TICK 1 9.856583e-07 7.917129e-10 c TICK 2 9.827836e-07 3.459393e-10 c TICK 3 9.845331e-07 4.918561e-10 c TICK 4 9.858521e-07 1.222940e-09 c TICK 5 9.843086e-07 3.900581e-12 c TICK 6 9.848147e-07 6.017975e-10 c TICK 7 9.839837e-07 1.912898e-10 c DATA 7 9.998664e-02 5.433200e-07 9.998564e-02 9.998765e-02 c DATA 7 9.998599e-02 9.174233e-07 9.998434e-02 9.998765e-02 c TICK 7 9.845620e-07 9.630494e-10 9.827836e-07 9.858521e-07 c c c THE EXPERIMENTAL TIMING ERRORS FOR ALL 7 RUNS c -- --------- --------- --------- ----- ----- --- c k T min T avg T max T err tick P-F c -- --------- --------- --------- ----- ----- --- c 1 4.6552e-02 4.6885e-02 4.7277e-02 0.44% 0.00% 0 c 2 2.3215e-01 2.3247e-01 2.3281e-01 0.10% 0.00% 0 c 3 1.3283e-01 1.3295e-01 1.3311e-01 0.07% 0.00% 0 c 4 5.4677e-01 5.4712e-01 5.4839e-01 0.10% 0.00% 0 c 5 3.2937e-01 3.2952e-01 3.2969e-01 0.03% 0.00% 0 c 6 5.7700e-01 5.7735e-01 5.7791e-01 0.06% 0.00% 0 c 7 5.7375e-02 5.7444e-02 5.7533e-02 0.10% 0.00% 0 c 8 1.1030e-01 1.1109e-01 1.1179e-01 0.55% 0.00% 0 c 9 8.8652e-02 8.9477e-02 9.0447e-02 0.64% 0.00% 0 c 10 8.1429e-02 8.1862e-02 8.2501e-02 0.42% 0.00% 0 c 11 2.7512e-01 2.7518e-01 2.7528e-01 0.02% 0.00% 0 c 12 4.5972e-02 4.6355e-02 4.6689e-02 0.47% 0.00% 0 c 13 2.9003e-01 2.9097e-01 2.9194e-01 0.19% 0.00% 0 c 14 1.5044e-01 1.5086e-01 1.5181e-01 0.29% 0.00% 0 c 15 4.9302e-01 4.9311e-01 4.9326e-01 0.02% 0.00% 0 c 16 3.2175e-01 3.2196e-01 3.2236e-01 0.06% 0.00% 0 c 17 3.9370e-01 3.9382e-01 3.9397e-01 0.03% 0.00% 0 c 18 1.0431e-01 1.0454e-01 1.0478e-01 0.17% 0.00% 0 c 19 4.9471e-01 4.9496e-01 4.9519e-01 0.03% 0.00% 0 c 20 4.5972e-01 4.5992e-01 4.6005e-01 0.03% 0.00% 0 c 21 8.4632e-01 8.5030e-01 8.5329e-01 0.29% 0.00% 0 c 22 5.1496e-02 5.1531e-02 5.1561e-02 0.05% 0.00% 0 c 23 4.6724e-01 4.6751e-01 4.6771e-01 0.04% 0.00% 0 c 24 1.4363e-01 1.4376e-01 1.4387e-01 0.05% 0.00% 0 c -- --------- --------- --------- ----- ----- --- c c c NET CPU TIMING VARIANCE (T err); A few % is ok: c c AVERAGE STANDEV MINIMUM MAXIMUM c Terr 0.18% 0.19% 0.02% 0.64% c c c c c c c c c c c c c1 c ******************************************** c THE LIVERMORE FORTRAN KERNELS: M F L O P S c ******************************************** c c Computer : CRAY-YMP (6.0ns) c System : NLTSS fully loaded c Compiler : CFT77 4.0.3.4 c Date : 91.07.14 c Mean DO Span = 19 c When the computer performance range is very large c the net Mflops rate of many Fortran programs and c workloads will be in the sub-range between the equi- c weighted Harmonic and Arithmetic means depending c on the degree of code parallelism and optimization. c The least biased central measure is the Geometric c Mean of 72 rates, quoted +- a standard deviation. c Mean Mflops rates imply the average efficiency of a c computing system since the peak rate is well known. c LFK test measures a lower bound for a Multi-processor c and N * LFK rates project an upper bound for N-procs. c c KERNEL FLOPS MICROSEC MFLOP/SEC SPAN WEIGHT CHECK-SUMS OK c ------ ----- -------- --------- ---- ------ ---------------------- -- c 1 6.0480e+06 4.6885e+04 128.9966 27 1.00 2.6985731517464592e+02 16 c 2 3.2384e+06 2.3247e+05 13.9304 15 1.00 2.7673078908323623e+02 13 c 3 3.1968e+06 1.3295e+05 24.0453 27 1.00 1.8895163625248799e+00 13 c 4 1.8240e+06 5.4712e+05 3.3338 27 1.00 4.1994754168318025e+00 14 c 5 3.3280e+06 3.2952e+05 10.0996 27 1.00 2.2278306739137747e+01 13 c 6 1.6128e+06 5.7735e+05 2.7934 8 1.00 7.8421657542730827e+00 12 c 7 1.0752e+07 5.7444e+04 187.1752 21 1.00 1.9920041523508189e+02 14 c 8 1.3478e+07 1.1109e+05 121.3250 14 1.00 2.0723805675143376e+04 12 c 9 1.0608e+07 8.9477e+04 118.5558 15 1.00 1.8367779226120794e+04 13 c 10 5.4000e+06 8.1862e+04 65.9647 15 1.00 1.1559038593888574e+04 13 c 11 1.9136e+06 2.7518e+05 6.9540 27 1.00 4.5858129350924282e+03 13 c 12 1.9968e+06 4.6355e+04 43.0764 26 1.00 1.3604051882776247e-05 9 c 13 2.7776e+06 2.9097e+05 9.5460 8 1.00 2.6929869385100195e+11 9 c 14 3.8016e+06 1.5086e+05 25.1997 27 1.00 2.0464784190878510e+07 11 c 15 3.6960e+06 4.9311e+05 7.4953 15 1.00 7.7629810169453849e+03 13 c 16 2.4640e+06 3.2196e+05 7.6531 15 1.00 3.6065120000000000e+06 16 c 17 5.6160e+06 3.9382e+05 14.2605 15 1.00 2.0631580330134784e+02 12 c 18 9.1520e+06 1.0454e+05 87.5496 14 1.00 6.7904523486389953e+03 12 c 19 4.0320e+06 4.9496e+05 8.1461 15 1.00 8.8776148863621074e+01 12 c 20 7.5712e+06 4.5992e+05 16.4620 26 1.00 4.1913992746301519e+03 12 c 21 4.0000e+07 8.5030e+05 47.0421 20 1.00 3.5069619696601486e+08 10 c 22 3.2640e+06 5.1531e+04 63.3400 15 1.00 4.2769781097853183e+01 13 c 23 8.0080e+06 4.6751e+05 17.1291 14 1.00 3.3952384219261585e+03 12 c 24 9.5680e+05 1.4376e+05 6.6557 27 1.00 9.1000000000000000e+01 16 c ------ ----- -------- --------- ---- ------ ---------------------- -- c 24 1.5474e+08 6.7509e+06 22.9207 19 303 c c MFLOPS RANGE: REPORT ALL RANGE STATISTICS: c Maximum Rate = 187.1752 Mega-Flops/Sec. c Quartile Q3 = 64.6524 Mega-Flops/Sec. c Average Rate = 43.1971 Mega-Flops/Sec. c Geometric Mean = 22.0242 Mega-Flops/Sec. c Median Q2 = 16.7955 Mega-Flops/Sec. c Harmonic Mean = 11.9909 Mega-Flops/Sec. c Quartile Q1 = 7.8996 Mega-Flops/Sec. c Minimum Rate = 2.7934 Mega-Flops/Sec. c c c Standard Dev. = 49.3389 Mega-Flops/Sec. c Avg Efficiency = 7.60% Program & Processor c Mean Precision = 12.62 Decimal Digits c1 c c c c c c c SENSITIVITY ANALYSIS c c c The sensitivity of the harmonic mean rate (Mflops) c to various weightings is shown in the table below. c Seven work distributions are generated by assigning c two distinct weights to ranked kernels by quartiles. c Forty nine possible cpu workloads are then evaluated c using seven sets of values for the total weights: c c c ------ ------ ------ ------ ------ ------ ------ c 1st QT: O O O O O X X c 2nd QT: O O O X X X O c 3rd QT: O X X X O O O c 4th QT: X X O O O O O c ------ ------ ------ ------ ------ ------ ------ c Total c Weights Net Mflops: c X O c ---- ---- c c 1.00 0.00 4.93 6.88 11.34 16.46 30.01 46.83 106.47 c c 0.95 0.05 5.14 7.18 11.38 15.87 27.28 36.29 69.80 c c 0.90 0.10 5.35 7.52 11.42 15.32 25.00 29.62 51.92 c c 0.80 0.20 5.85 8.29 11.51 14.32 21.43 21.66 34.33 c c 0.70 0.30 6.45 9.24 11.59 13.45 18.74 17.07 25.64 c c 0.60 0.40 7.19 10.44 11.68 12.68 16.66 14.09 20.47 c c 0.50 0.50 8.12 11.99 11.77 11.99 14.99 11.99 17.03 c ---- ---- c ------ ------ ------ ------ ------ ------ ------ c c c c c c c SENSITIVITY OF NET MFLOPS RATE TO USE OF OPTIMAL FORTRAN CODE(SISD/SIMD MODEL) c c 6.88 8.46 10.99 15.67 19.92 27.32 43.48 61.75 106.47 c c 0.00 0.20 0.40 0.60 0.70 0.80 0.90 0.95 1.00 c Fraction Of Operations Run At Optimal Fortran Rates c c c c c c c c c c c c c c c1 c ******************************************** c THE LIVERMORE FORTRAN KERNELS: * SUMMARY * c ******************************************** c c Computer : CRAY-YMP (6.0ns) c System : NLTSS fully loaded c Compiler : CFT77 4.0.3.4 c Date : 91.07.14 c Mean DO Span = 167 c When the computer performance range is very large c the net Mflops rate of many Fortran programs and c workloads will be in the sub-range between the equi- c weighted Harmonic and Arithmetic means depending c on the degree of code parallelism and optimization. c The least biased central measure is the Geometric c Mean of 72 rates, quoted +- a standard deviation. c Mean Mflops rates imply the average efficiency of a c computing system since the peak rate is well known. c LFK test measures a lower bound for a Multi-processor c and N * LFK rates project an upper bound for N-procs. c c KERNEL FLOPS MICROSEC MFLOP/SEC SPAN WEIGHT CHECK-SUMS OK c ------ ----- -------- --------- ---- ------ ---------------------- -- c 1 6.0480e+06 4.6885e+04 128.9966 27 1.00 2.6985731517464592e+02 16 c 2 3.2384e+06 2.3247e+05 13.9304 15 1.00 2.7673078908323623e+02 13 c 3 3.1968e+06 1.3295e+05 24.0453 27 1.00 1.8895163625248799e+00 13 c 4 1.8240e+06 5.4712e+05 3.3338 27 1.00 4.1994754168318025e+00 14 c 5 3.3280e+06 3.2952e+05 10.0996 27 1.00 2.2278306739137747e+01 13 c 6 1.6128e+06 5.7735e+05 2.7934 8 1.00 7.8421657542730827e+00 12 c 7 1.0752e+07 5.7444e+04 187.1752 21 1.00 1.9920041523508189e+02 14 c 8 1.3478e+07 1.1109e+05 121.3250 14 1.00 2.0723805675143376e+04 12 c 9 1.0608e+07 8.9477e+04 118.5558 15 1.00 1.8367779226120794e+04 13 c 10 5.4000e+06 8.1862e+04 65.9647 15 1.00 1.1559038593888574e+04 13 c 11 1.9136e+06 2.7518e+05 6.9540 27 1.00 4.5858129350924282e+03 13 c 12 1.9968e+06 4.6355e+04 43.0764 26 1.00 1.3604051882776247e-05 9 c 13 2.7776e+06 2.9097e+05 9.5460 8 1.00 2.6929869385100195e+11 9 c 14 3.8016e+06 1.5086e+05 25.1997 27 1.00 2.0464784190878510e+07 11 c 15 3.6960e+06 4.9311e+05 7.4953 15 1.00 7.7629810169453849e+03 13 c 16 2.4640e+06 3.2196e+05 7.6531 15 1.00 3.6065120000000000e+06 16 c 17 5.6160e+06 3.9382e+05 14.2605 15 1.00 2.0631580330134784e+02 12 c 18 9.1520e+06 1.0454e+05 87.5496 14 1.00 6.7904523486389953e+03 12 c 19 4.0320e+06 4.9496e+05 8.1461 15 1.00 8.8776148863621074e+01 12 c 20 7.5712e+06 4.5992e+05 16.4620 26 1.00 4.1913992746301519e+03 12 c 21 4.0000e+07 8.5030e+05 47.0421 20 1.00 3.5069619696601486e+08 10 c 22 3.2640e+06 5.1531e+04 63.3400 15 1.00 4.2769781097853183e+01 13 c 23 8.0080e+06 4.6751e+05 17.1291 14 1.00 3.3952384219261585e+03 12 c 24 9.5680e+05 1.4376e+05 6.6557 27 1.00 9.1000000000000000e+01 16 c 1 8.0800e+06 4.1146e+04 196.3722 101 2.00 3.6773413452565728e+03 16 c 2 6.2080e+06 1.2274e+05 50.5788 101 2.00 1.0778052681679546e+04 13 c 3 4.2824e+06 6.0540e+04 70.7366 101 2.00 7.0681900560541635e+00 13 c 4 3.3600e+06 2.5194e+05 13.3367 101 2.00 4.1994754168318025e+00 14 c 5 4.4000e+06 4.1142e+05 10.6948 101 2.00 3.2123223577214776e+02 13 c 6 2.6880e+06 2.2615e+05 11.8860 32 2.00 6.0421729517419226e+02 12 c 7 1.4221e+07 5.3120e+04 267.7098 101 2.00 4.4419104210488440e+03 14 c 8 1.7107e+07 7.8555e+04 217.7736 100 2.00 1.0508876039390042e+06 12 c 9 1.4423e+07 6.3375e+04 227.5796 101 2.00 8.3261052698255703e+05 13 c 10 6.9084e+06 6.4887e+04 106.4682 101 2.00 5.1172588490281440e+05 13 c 11 2.5600e+06 3.4615e+05 7.3957 101 2.00 2.4034922852330748e+05 14 c 12 2.7200e+06 3.3878e+04 80.2871 100 2.00 4.9892984137045460e-05 8 c 13 3.6736e+06 2.0332e+05 18.0678 32 2.00 6.8714714682226172e+11 10 c 14 4.4440e+06 1.5473e+05 28.7211 101 2.00 2.1279884256031895e+08 12 c 15 6.6000e+06 8.8713e+05 7.4397 101 2.00 2.7606716832465865e+05 13 c 16 3.0240e+06 3.9427e+05 7.6699 40 2.00 4.5362870000000000e+06 16 c 17 7.2720e+06 5.3093e+05 13.6968 101 2.00 7.8024924103214871e+03 12 c 18 8.7120e+06 4.6655e+04 186.7309 100 2.00 7.1100892625153065e+05 13 c 19 5.5752e+06 6.6303e+05 8.4086 101 2.00 3.7952718721052370e+03 12 c 20 8.3200e+06 5.0312e+05 16.5369 100 2.00 2.1883436251674779e+05 12 c 21 2.5000e+07 2.7087e+05 92.2937 50 2.00 5.4771674139930725e+08 11 c 22 4.8076e+06 4.7480e+04 101.2550 101 2.00 2.0570230635969638e+03 13 c 23 1.0890e+07 6.0143e+05 18.1067 100 2.00 2.4849303510962054e+05 12 c 24 1.2400e+06 8.3784e+04 14.7999 101 2.00 3.5000000000000000e+02 16 c 1 7.0070e+06 2.7708e+04 252.8850 1001 1.00 3.5802568852572702e+05 14 c 2 5.1992e+06 1.0274e+05 50.6078 101 1.00 1.0778052681679546e+04 13 c 3 3.6036e+06 1.5608e+04 230.8880 1001 1.00 7.0052001814661253e+01 13 c 4 3.3600e+06 4.1403e+04 81.1541 1001 1.00 4.1994754168318025e+00 14 c 5 4.0000e+06 3.6710e+05 10.8963 1001 1.00 3.1842101496719639e+04 13 c 6 2.3808e+06 1.1602e+05 20.5205 64 1.00 3.0625814413198270e+04 12 c 7 1.2736e+07 4.3928e+04 289.9310 995 1.00 4.2729757526224293e+05 14 c 8 1.4256e+07 6.5553e+04 217.4721 100 1.00 1.0508876039390042e+06 12 c 9 1.2362e+07 5.4393e+04 227.2807 101 1.00 8.3261052698255703e+05 13 c 10 6.1812e+06 5.8703e+04 105.2963 101 1.00 5.1172588490281440e+05 13 c 11 2.2000e+06 2.8528e+05 7.7117 1001 1.00 2.3400376808530903e+08 12 c 12 2.4000e+06 2.2675e+04 105.8436 1000 1.00 2.0349990127721540e-04 7 c 13 3.2256e+06 1.5542e+05 20.7546 64 1.00 8.4177377140212891e+11 9 c 14 4.4044e+06 1.4694e+05 29.9742 1001 1.00 2.2158871308010742e+10 12 c 15 3.3000e+06 4.4352e+05 7.4405 101 1.00 2.7606716832465865e+05 13 c 16 2.6500e+06 3.3750e+05 7.8518 75 1.00 3.9555320000000000e+06 16 c 17 6.3630e+06 4.6448e+05 13.6991 101 1.00 7.8024924103214871e+03 12 c 18 8.7120e+06 4.6617e+04 186.8842 100 1.00 7.1100892625153065e+05 13 c 19 4.7268e+06 5.6192e+05 8.4119 101 1.00 3.7952718721052370e+03 12 c 20 5.2000e+06 3.1387e+05 16.5676 1000 1.00 2.1284510375197506e+08 11 c 21 2.5250e+07 1.9862e+05 127.1262 101 1.00 1.1181157964903107e+09 11 c 22 3.7774e+06 3.7309e+04 101.2451 101 1.00 2.0570230635969638e+03 13 c 23 8.7120e+06 4.8090e+05 18.1160 100 1.00 2.4849303510962054e+05 12 c 24 1.0000e+06 2.5783e+04 38.7847 1001 1.00 3.5000000000000000e+03 16 c ------ ----- -------- --------- ---- ------ ---------------------- -- c 72 4.8426e+08 1.7306e+07 27.9829 167 910 c c MFLOPS RANGE: REPORT ALL RANGE STATISTICS: c Maximum Rate = 289.9310 Mega-Flops/Sec. c Quartile Q3 = 105.2963 Mega-Flops/Sec. c Average Rate = 70.4496 Mega-Flops/Sec. c Geometric Mean = 33.9496 Mega-Flops/Sec. c Median Q2 = 24.0453 Mega-Flops/Sec. c Harmonic Mean = 17.5236 Mega-Flops/Sec. c Quartile Q1 = 10.8963 Mega-Flops/Sec. c Minimum Rate = 2.7934 Mega-Flops/Sec. c c c Standard Dev. = 79.4989 Mega-Flops/Sec. c Avg Efficiency = 11.71% Program & Processor c Mean Precision = 12.64 Decimal Digits c <<<<<<<<<<<<<<<<<<<<<<<<<<<*>>>>>>>>>>>>>>>>>>>>>>>>>>> c < BOTTOM-LINE: 72 SAMPLES LFK TEST RESULTS SUMMARY. > c < USE RANGE STATISTICS ABOVE FOR OFFICIAL QUOTATIONS. > c <<<<<<<<<<<<<<<<<<<<<<<<<<<*>>>>>>>>>>>>>>>>>>>>>>>>>>> c1 c c c TOP QUARTILE: BEST ARCHITECTURE/APPLICATION MATCH c c c c KERNEL FLOPS MICROSEC MFLOP/SEC SPAN WEIGHT c ------ ----- -------- --------- ---- ------ c 7 1.2736e+07 4.3928e+04 289.9310 995 1.00 c 7 1.4221e+07 5.3120e+04 267.7098 101 2.00 c 1 7.0070e+06 2.7708e+04 252.8850 1001 1.00 c 3 3.6036e+06 1.5608e+04 230.8880 1001 1.00 c 9 1.4423e+07 6.3375e+04 227.5796 101 2.00 c 9 1.2362e+07 5.4393e+04 227.2807 101 1.00 c 8 1.7107e+07 7.8555e+04 217.7736 100 2.00 c 8 1.4256e+07 6.5553e+04 217.4721 100 1.00 c 1 8.0800e+06 4.1146e+04 196.3722 101 2.00 c 7 1.0752e+07 5.7444e+04 187.1752 21 1.00 c 18 8.7120e+06 4.6617e+04 186.8842 100 1.00 c 18 8.7120e+06 4.6655e+04 186.7309 100 2.00 c 1 6.0480e+06 4.6885e+04 128.9966 27 1.00 c 21 2.5250e+07 1.9862e+05 127.1262 101 1.00 c 8 1.3478e+07 1.1109e+05 121.3250 14 1.00 c 9 1.0608e+07 8.9477e+04 118.5558 15 1.00 c 10 6.9084e+06 6.4887e+04 106.4682 101 2.00 c 12 2.4000e+06 2.2675e+04 105.8436 1000 1.00 c ------ ----- -------- --------- ---- ------ c c Frac. Weights = 0.2500 c Average Rate = 191.6513 Mega-Flops/Sec. c Harmonic Mean = 173.5450 Mega-Flops/Sec. c Standard Dev. = 55.0716 Mega-Flops/Sec. c c c c KERNEL FLOPS MICROSEC MFLOP/SEC SPAN WEIGHT c ------ ----- -------- --------- ---- ------ c 10 6.1812e+06 5.8703e+04 105.2963 101 1.00 c 22 4.8076e+06 4.7480e+04 101.2550 101 2.00 c 22 3.7774e+06 3.7309e+04 101.2451 101 1.00 c 21 2.5000e+07 2.7087e+05 92.2937 50 2.00 c 18 9.1520e+06 1.0454e+05 87.5496 14 1.00 c 4 3.3600e+06 4.1403e+04 81.1541 1001 1.00 c 12 2.7200e+06 3.3878e+04 80.2871 100 2.00 c 3 4.2824e+06 6.0540e+04 70.7366 101 2.00 c 10 5.4000e+06 8.1862e+04 65.9647 15 1.00 c 22 3.2640e+06 5.1531e+04 63.3400 15 1.00 c 2 5.1992e+06 1.0274e+05 50.6078 101 1.00 c 2 6.2080e+06 1.2274e+05 50.5788 101 2.00 c 21 4.0000e+07 8.5030e+05 47.0421 20 1.00 c 12 1.9968e+06 4.6355e+04 43.0764 26 1.00 c 24 1.0000e+06 2.5783e+04 38.7847 1001 1.00 c 14 4.4044e+06 1.4694e+05 29.9742 1001 1.00 c 14 4.4440e+06 1.5473e+05 28.7211 101 2.00 c 14 3.8016e+06 1.5086e+05 25.1997 27 1.00 c 3 3.1968e+06 1.3295e+05 24.0453 27 1.00 c 13 3.2256e+06 1.5542e+05 20.7546 64 1.00 c 6 2.3808e+06 1.1602e+05 20.5205 64 1.00 c 23 8.7120e+06 4.8090e+05 18.1160 100 1.00 c 23 1.0890e+07 6.0143e+05 18.1067 100 2.00 c 13 3.6736e+06 2.0332e+05 18.0678 32 2.00 c 23 8.0080e+06 4.6751e+05 17.1291 14 1.00 c 20 5.2000e+06 3.1387e+05 16.5676 1000 1.00 c 20 8.3200e+06 5.0312e+05 16.5369 100 2.00 c 20 7.5712e+06 4.5992e+05 16.4620 26 1.00 c 24 1.2400e+06 8.3784e+04 14.7999 101 2.00 c 17 5.6160e+06 3.9382e+05 14.2605 15 1.00 c 2 3.2384e+06 2.3247e+05 13.9304 15 1.00 c 17 6.3630e+06 4.6448e+05 13.6991 101 1.00 c 17 7.2720e+06 5.3093e+05 13.6968 101 2.00 c 4 3.3600e+06 2.5194e+05 13.3367 101 2.00 c 6 2.6880e+06 2.2615e+05 11.8860 32 2.00 c 5 4.0000e+06 3.6710e+05 10.8963 1001 1.00 c ------ ----- -------- --------- ---- ------ c c Frac. Weights = 0.5104 c Average Rate = 40.5352 Mega-Flops/Sec. c Harmonic Mean = 23.7604 Mega-Flops/Sec. c Standard Dev. = 30.9452 Mega-Flops/Sec. c c c c KERNEL FLOPS MICROSEC MFLOP/SEC SPAN WEIGHT c ------ ----- -------- --------- ---- ------ c 5 4.4000e+06 4.1142e+05 10.6948 101 2.00 c 5 3.3280e+06 3.2952e+05 10.0996 27 1.00 c 13 2.7776e+06 2.9097e+05 9.5460 8 1.00 c 19 4.7268e+06 5.6192e+05 8.4119 101 1.00 c 19 5.5752e+06 6.6303e+05 8.4086 101 2.00 c 19 4.0320e+06 4.9496e+05 8.1461 15 1.00 c 16 2.6500e+06 3.3750e+05 7.8518 75 1.00 c 11 2.2000e+06 2.8528e+05 7.7117 1001 1.00 c 16 3.0240e+06 3.9427e+05 7.6699 40 2.00 c 16 2.4640e+06 3.2196e+05 7.6531 15 1.00 c 15 3.6960e+06 4.9311e+05 7.4953 15 1.00 c 15 3.3000e+06 4.4352e+05 7.4405 101 1.00 c 15 6.6000e+06 8.8713e+05 7.4397 101 2.00 c 11 2.5600e+06 3.4615e+05 7.3957 101 2.00 c 11 1.9136e+06 2.7518e+05 6.9540 27 1.00 c 24 9.5680e+05 1.4376e+05 6.6557 27 1.00 c 4 1.8240e+06 5.4712e+05 3.3338 27 1.00 c 6 1.6128e+06 5.7735e+05 2.7934 8 1.00 c ------ ----- -------- --------- ---- ------ c c Frac. Weights = 0.2396 c Average Rate = 7.7092 Mega-Flops/Sec. c Harmonic Mean = 7.0169 Mega-Flops/Sec. c Standard Dev. = 1.7944 Mega-Flops/Sec. c1 c c c c c c c SENSITIVITY ANALYSIS c c c The sensitivity of the harmonic mean rate (Mflops) c to various weightings is shown in the table below. c Seven work distributions are generated by assigning c two distinct weights to ranked kernels by quartiles. c Forty nine possible cpu workloads are then evaluated c using seven sets of values for the total weights: c c c ------ ------ ------ ------ ------ ------ ------ c 1st QT: O O O O O X X c 2nd QT: O O O X X X O c 3rd QT: O X X X O O O c 4th QT: X X O O O O O c ------ ------ ------ ------ ------ ------ ------ c Total c Weights Net Mflops: c X O c ---- ---- c c 1.00 0.00 6.75 9.43 15.64 24.17 53.09 80.94 170.24 c c 0.95 0.05 7.03 9.87 15.72 23.17 46.46 58.70 106.07 c c 0.90 0.10 7.34 10.35 15.80 22.25 41.30 46.04 77.04 c c 0.80 0.20 8.04 11.46 15.96 20.62 33.79 32.17 49.78 c c 0.70 0.30 8.89 12.84 16.12 19.21 28.59 24.72 36.77 c c 0.60 0.40 9.93 14.59 16.29 17.98 24.78 20.08 29.15 c c 0.50 0.50 11.26 16.90 16.46 16.90 21.87 16.90 24.15 c ---- ---- c ------ ------ ------ ------ ------ ------ ------ c c c c c c c SENSITIVITY OF NET MFLOPS RATE TO USE OF OPTIMAL FORTRAN CODE(SISD/SIMD MODEL) c c 9.80 12.08 15.74 22.58 28.86 39.96 64.97 94.54 173.54 c c 0.00 0.20 0.40 0.60 0.70 0.80 0.90 0.95 1.00 c Fraction Of Operations Run At Optimal Fortran Rates c c c1 c c c Cumulative Checksums: RUN= 1 c c k VL= 471 90 19 c 1 5.1146526932246750e+04 5.2533447789379716e+02 3.8551045024949644e+01 c 2 1.5397218116685108e+03 1.5397218116685108e+03 3.9532969869033877e+01 c 3 1.0007428830665901e+01 1.0097414365791693e+00 2.6993090893212646e-01 c 4 5.9992505954740238e-01 5.9992505954740238e-01 5.9992505954740238e-01 c 5 4.5488716423885198e+03 4.5890319396021141e+01 3.1826152484482577e+00 c 6 4.3751163447426225e+03 8.6316756453456492e+01 1.1203093934675863e+00 c 7 6.1042510751749156e+04 6.3455863157840940e+02 2.8457202176440319e+01 c 8 1.5012680056271516e+05 1.5012680056271516e+05 2.9605436678776314e+03 c 9 1.1894436099750828e+05 1.1894436099750828e+05 2.6239684608743992e+03 c 10 7.3103697843259200e+04 7.3103697843259200e+04 1.6512912276983698e+03 c 11 3.3429109726472735e+07 3.4335604074758245e+04 6.5511613358463364e+02 c 12 2.9071414468173629e-05 7.1275691624350657e-06 1.9434359832537496e-06 c 13 1.2025339591459033e+11 9.8163878117466309e+10 3.8471241978714600e+10 c 14 3.1655530440015411e+09 3.0399834651474237e+07 2.9235405986969322e+06 c 15 3.9438166903522797e+04 3.9438166903522797e+04 1.1089972881350550e+03 c 16 5.6507600000000000e+05 6.4804100000000000e+05 5.1521600000000000e+05 c 17 1.1146417729030727e+03 1.1146417729030727e+03 2.9473686185906899e+01 c 18 1.0157270375021873e+05 1.0157270375021873e+05 9.7006462123414531e+02 c 19 5.4218169601503541e+02 5.4218169601503541e+02 1.2682306980517353e+01 c 20 3.0406443393139362e+07 3.1262051788106910e+04 5.9877132494716716e+02 c 21 1.5973082807004452e+08 7.8245248771329880e+07 5.0099456709430933e+07 c 22 2.9386043765670911e+02 2.9386043765670911e+02 6.1099687282647608e+00 c 23 3.5499005015660077e+04 3.5499005015660077e+04 4.8503406027516576e+02 c 24 5.0000000000000000e+02 5.0000000000000000e+01 1.3000000000000000e+01 c c c Cumulative Checksums: RUN= 7 c c k VL= 471 90 19 c 1 3.5802568852572702e+05 3.6773413452565728e+03 2.6985731517464592e+02 c 2 1.0778052681679546e+04 1.0778052681679546e+04 2.7673078908323623e+02 c 3 7.0052001814661253e+01 7.0681900560541635e+00 1.8895163625248799e+00 c 4 4.1994754168318025e+00 4.1994754168318025e+00 4.1994754168318025e+00 c 5 3.1842101496719639e+04 3.2123223577214776e+02 2.2278306739137747e+01 c 6 3.0625814413198270e+04 6.0421729517419226e+02 7.8421657542730827e+00 c 7 4.2729757526224293e+05 4.4419104210488440e+03 1.9920041523508189e+02 c 8 1.0508876039390042e+06 1.0508876039390042e+06 2.0723805675143376e+04 c 9 8.3261052698255703e+05 8.3261052698255703e+05 1.8367779226120794e+04 c 10 5.1172588490281440e+05 5.1172588490281440e+05 1.1559038593888574e+04 c 11 2.3400376808530903e+08 2.4034922852330748e+05 4.5858129350924282e+03 c 12 2.0349990127721540e-04 4.9892984137045460e-05 1.3604051882776247e-05 c 13 8.4177377140212891e+11 6.8714714682226172e+11 2.6929869385100195e+11 c 14 2.2158871308010742e+10 2.1279884256031895e+08 2.0464784190878510e+07 c 15 2.7606716832465865e+05 2.7606716832465865e+05 7.7629810169453849e+03 c 16 3.9555320000000000e+06 4.5362870000000000e+06 3.6065120000000000e+06 c 17 7.8024924103214871e+03 7.8024924103214871e+03 2.0631580330134784e+02 c 18 7.1100892625153065e+05 7.1100892625153065e+05 6.7904523486389953e+03 c 19 3.7952718721052370e+03 3.7952718721052370e+03 8.8776148863621074e+01 c 20 2.1284510375197506e+08 2.1883436251674779e+05 4.1913992746301519e+03 c 21 1.1181157964903107e+09 5.4771674139930725e+08 3.5069619696601486e+08 c 22 2.0570230635969638e+03 2.0570230635969638e+03 4.2769781097853183e+01 c 23 2.4849303510962054e+05 2.4849303510962054e+05 3.3952384219261585e+03 c 24 3.5000000000000000e+03 3.5000000000000000e+02 9.1000000000000000e+01 c1 c c c TABLE OF SPEED-UP RATIOS OF MEAN RATES (72 Samples) c c Arithmetic, Geometric, Harmonic Means (AM,GM,HM) c The Geometric Mean is the least biased statistic. c c -------- ---- ------ -------- -------- -------- -------- -------- -------- c SYSTEM MEAN MFLOPS SX-3/14 CRAY-YMP 3090s180 9000/720 6000/540 i486/25 c -------- ---- ------ -------- -------- -------- -------- -------- -------- c c c NEC AM= 311.820 : 1.000 4.426 17.757 22.678 22.006 271.148 c SX-3/14 GM= 95.590 : 1.000 2.816 7.816 8.334 8.909 91.038 c F77v.012 HM= 38.730 : 1.000 2.210 4.294 4.242 5.199 42.098 c SD= 499.780 c c c CRAY-YMP AM= 70.450 : 0.226 1.000 4.012 5.124 4.972 61.261 c CRAY-YMP GM= 33.950 : 0.355 1.000 2.776 2.960 3.164 32.333 c CFT77 4. HM= 17.524 : 0.452 1.000 1.943 1.919 2.352 19.047 c SD= 79.499 c c c IBM AM= 17.560 : 0.056 0.249 1.000 1.277 1.239 15.270 c 3090s180 GM= 12.230 : 0.128 0.360 1.000 1.066 1.140 11.648 c VSF2.2.0 HM= 9.020 : 0.233 0.515 1.000 0.988 1.211 9.804 c SD= 16.320 c c c HP AM= 13.750 : 0.044 0.195 0.783 1.000 0.970 11.957 c 9000/720 GM= 11.470 : 0.120 0.338 0.938 1.000 1.069 10.924 c f77 8.05 HM= 9.130 : 0.236 0.521 1.012 1.000 1.226 9.924 c SD= 7.510 c c c IBM AM= 14.170 : 0.045 0.201 0.807 1.031 1.000 12.322 c 6000/540 GM= 10.730 : 0.112 0.316 0.877 0.935 1.000 10.219 c XL v0.90 HM= 7.450 : 0.192 0.425 0.826 0.816 1.000 8.098 c SD= 9.590 c c c COMPAQ AM= 1.150 : 0.004 0.016 0.065 0.084 0.081 1.000 c i486/25 GM= 1.050 : 0.011 0.031 0.086 0.092 0.098 1.000 c HM= 0.920 : 0.024 0.053 0.102 0.101 0.123 1.000 c SD= 0.480 c1 c c Version: 22/DEC/86 MF508 c CHECK FOR CLOCK CALIBRATION ONLY: c Total Job Cpu Time = 1.57890e+02 Sec. c Total 24 Kernels Time = 1.21139e+02 Sec. c Total 24 Kernels Flops= 3.38982e+09 Flops C F.H.MCMAHON 1991 C********************************************************************** c c c c 5. SAMPLE OUTPUT FILE FROM SUBROUTINe REPORT: SUN SPARC station 1+ c C c >>> USE 72 SAMPLES LFK TEST RESULTS SUMMARY (line 330+) c >>> USE ALL RANGE STATISTICS FOR OFFICIAL QUOTATIONS. cSECOVT: 16000 0.2500E-04 1.0000 cSECOVT: 32000 0.1969E-04 0.2125 cSECOVT: 64000 0.1344E-04 0.3175 cSECOVT: 128000 0.1570E-04 0.1443 cSECOVT: 256000 0.1527E-04 0.0274 cSECOVT: 512000 0.1420E-04 0.0703 cSECOVT: 1024000 0.1488E-04 0.0459 c c VERIFY ADEQUATE Loop SIZE VERSUS CPU CLOCK ACCURACY c ----- ------- ------- ------- -------- c EXTRA MAXIMUM DIGITAL DYNAMIC RELATIVE c Loop CPUTIME CLOCK CLOCK TIMING c SIZE SECONDS ERROR ERROR ERROR c ----- ------- ------- ------- -------- c 1 -0.1527E-04 0.00% 100.00% 115.28% c 2 -0.1527E-04 0.00% 100.00% 107.64% c 4 -0.1527E-04 0.00% 100.00% 103.82% c 8 0.9985E-02 0.00% 201.54% 148.20% c 16 0.9985E-02 0.00% 201.54% 24.10% c 32 0.9985E-02 0.00% 201.54% 37.95% c 64 0.9985E-02 0.00% 50.10% 24.81% c 128 0.1999E-01 0.00% 33.38% 6.33% c 256 0.2999E-01 0.00% 18.85% 1.54% c 512 0.5998E-01 0.00% 7.69% 1.57% c 1024 0.1100E+00 0.00% 3.92% 0.37% c 2048 0.2100E+00 0.00% 2.38% 0.62% c 4096 0.4100E+00 0.00% 0.00% 0.13% c 8192 0.8200E+00 0.00% 0.49% 0.11% c 13600 Current Run: MULTI= 200.000 c 16384 0.1640E+01 0.00% 0.30% 0.11% c 32768 0.3280E+01 0.00% 0.15% 0.02% c ----- ------- ------- ------- -------- c c Estimated Total Job Cpu-Time= 2593.310 sec. ( Nruns= 7 Trials) c c Trial= 1 ChkSum= 1146 Pass= 0 Fail= 0 c Time= 452.71sec c Trial= 2 ChkSum= 1146 Pass= 1 Fail= 0 c Time= 782.49sec c Trial= 3 ChkSum= 1146 Pass= 2 Fail= 0 c Time= 1110.76sec c Trial= 4 ChkSum= 1146 Pass= 3 Fail= 0 c Time= 1437.19sec c Trial= 5 ChkSum= 1146 Pass= 4 Fail= 0 c Time= 1794.01sec c Trial= 6 ChkSum= 1146 Pass= 5 Fail= 0 c Time= 2150.69sec c Trial= 7 ChkSum= 1146 Pass= 6 Fail= 0 c Time= 2477.55sec c1 c c c time TEST overhead (t err): c c RUN AVERAGE STANDEV MINIMUM MAXIMUM c TICK 1 0.249996E-05 0.451660E-10 c TICK 2 0.246863E-05 0.311374E-07 c TICK 3 0.248439E-05 0.154251E-07 c TICK 4 0.250008E-05 0.839114E-09 c TICK 5 0.250005E-05 0.868416E-09 c TICK 6 0.250005E-05 0.861573E-09 c TICK 7 0.250010E-05 0.818610E-09 c DATA 7 0.999866E-01 0.543320E-06 0.999856E-01 0.999877E-01 c DATA 7 0.999859E-01 0.862081E-06 0.999843E-01 0.999875E-01 c TICK 7 0.249332E-05 0.114356E-07 0.246863E-05 0.250010E-05 c c c THE EXPERIMENTAL TIMING ERRORS FOR ALL 7 RUNS c -- --------- --------- --------- ----- ----- --- c k T min T avg T max T err tick P-F c -- --------- --------- --------- ----- ----- --- c 1 0.3606E+01 0.3609E+01 0.3627E+01 0.19% 0.00% 0 c 2 0.2726E+01 0.2735E+01 0.2737E+01 0.13% 0.00% 0 c 3 0.1135E+01 0.1141E+01 0.1146E+01 0.44% 0.00% 0 c 4 0.1063E+01 0.1069E+01 0.1073E+01 0.46% 0.00% 0 c 5 0.3065E+01 0.3066E+01 0.3075E+01 0.11% 0.00% 0 c 6 0.1768E+01 0.1769E+01 0.1769E+01 0.00% 0.00% 0 c 7 0.4608E+01 0.4619E+01 0.4628E+01 0.14% 0.00% 0 c 8 0.7105E+01 0.7109E+01 0.7115E+01 0.07% 0.00% 0 c 9 0.4332E+01 0.4338E+01 0.4342E+01 0.11% 0.00% 0 c 10 0.7303E+01 0.7307E+01 0.7313E+01 0.07% 0.00% 0 c 11 0.2404E+01 0.2409E+01 0.2415E+01 0.20% 0.00% 0 c 12 0.2404E+01 0.2408E+01 0.2414E+01 0.21% 0.00% 0 c 13 0.5062E+01 0.5066E+01 0.5072E+01 0.10% 0.00% 0 c 14 0.6379E+01 0.6382E+01 0.6389E+01 0.07% 0.00% 0 c 15 0.5790E+01 0.5797E+01 0.5800E+01 0.08% 0.00% 0 c 16 0.2017E+01 0.2020E+01 0.2028E+01 0.23% 0.00% 0 c 17 0.2712E+01 0.2718E+01 0.2722E+01 0.18% 0.00% 0 c 18 0.4549E+01 0.4553E+01 0.4559E+01 0.11% 0.00% 0 c 19 0.3850E+01 0.3856E+01 0.3861E+01 0.13% 0.00% 0 c 20 0.3530E+01 0.3535E+01 0.3540E+01 0.14% 0.00% 0 c 21 0.1274E+02 0.1276E+02 0.1281E+02 0.18% 0.00% 0 c 22 0.3884E+01 0.3892E+01 0.3895E+01 0.12% 0.00% 0 c 23 0.3886E+01 0.3889E+01 0.3896E+01 0.12% 0.00% 0 c 24 0.9975E+00 0.1003E+01 0.1008E+01 0.49% 0.00% 0 c -- --------- --------- --------- ----- ----- --- c c c NET CPU TIMING VARIANCE (T err); A few % is ok: c c AVERAGE STANDEV MINIMUM MAXIMUM c Terr 0.17% 0.12% 0.00% 0.49% c c c c c c ******************************************** c THE LIVERMORE FORTRAN KERNELS: * SUMMARY * c ******************************************** c c Computer : SUN SPARC 1+ c System : UNIX BSD 4 c Compiler : f77 V1.4 c Date : 91.08.14 c Mean DO Span = 167 c When the computer performance range is very large c the net Mflops rate of many Fortran programs and c workloads will be in the sub-range between the equi- c weighted Harmonic and Arithmetic means depending c on the degree of code parallelism and optimization. c The least biased central measure is the Geometric c Mean of 72 rates, quoted +- a standard deviation. c Mean Mflops rates imply the average efficiency of a c computing system since the peak rate is well known. c LFK test measures a lower bound for a Multi-processor c and N * LFK rates project an upper bound for N-procs. c c KERNEL FLOPS MICROSEC MFLOP/SEC SPAN WEIGHT CHECK-SUMS OK c ------ ----- -------- --------- ---- ------ ---------------------- -- c 1 6.0480E+06 3.1826E+06 1.9003 27 1.00 2.6985731517464728E+02 16 c 2 3.2384E+06 1.9908E+06 1.6267 15 1.00 2.7673078908321412E+02 16 c 3 3.1968E+06 1.0995E+06 2.9074 27 1.00 1.8895163625244704E+00 16 c 4 1.8240E+06 1.1913E+06 1.5311 27 1.00 4.1994754168317234E+00 16 c 5 3.3280E+06 2.5375E+06 1.3115 27 1.00 2.2278306739132379E+01 16 c 6 1.6128E+06 1.7233E+06 0.9359 8 1.00 7.8421657542696117E+00 15 c 7 1.0752E+07 3.8688E+06 2.7792 21 1.00 1.9920041523508166E+02 16 c 8 1.3478E+07 6.4283E+06 2.0967 14 1.00 2.0723805675125019E+04 16 c 9 1.0608E+07 3.6977E+06 2.8688 15 1.00 1.8367779226119754E+04 16 c 10 5.4000E+06 6.3503E+06 0.8504 15 1.00 1.1559038593887853E+04 16 c 11 1.9136E+06 2.2822E+06 0.8385 27 1.00 4.5858129350920399E+03 16 c 12 1.9968E+06 2.1599E+06 0.9245 26 1.00 1.3604051867913136E-05 16 c 13 2.7776E+06 4.4606E+06 0.6227 8 1.00 8.1274474685488098E+10 15 c 14 3.8016E+06 4.7952E+06 0.7928 27 1.00 1.8264361844941873E+07 16 c 15 3.6960E+06 6.3375E+06 0.5832 15 1.00 7.7629810169434950E+03 16 c 16 2.4640E+06 1.9713E+06 1.2499 15 1.00 1.8033120000000000E+06 16 c 17 5.6160E+06 2.3734E+06 2.3662 15 1.00 2.0631580330125522E+02 16 c 18 9.1520E+06 4.9492E+06 1.8492 14 1.00 6.7904523486359285E+03 16 c 19 4.0320E+06 3.4454E+06 1.1703 15 1.00 8.8776148863570242E+01 15 c 20 7.5712E+06 4.8563E+06 1.5590 26 1.00 4.1913992746327112E+03 16 c 21 4.0000E+07 2.0945E+07 1.9098 20 1.00 1.7539193044904393E+08 16 c 22 3.2640E+06 3.3795E+06 0.9658 15 1.00 4.2769781097847805E+01 16 c 23 8.0080E+06 3.6221E+06 2.2109 14 1.00 3.3952384219249789E+03 16 c 24 9.5680E+05 9.7110E+05 0.9853 27 1.00 9.1000000000000000E+01 16 c 1 8.0800E+06 4.0887E+06 1.9762 101 2.00 3.6773413452565801E+03 16 c 2 6.2080E+06 3.2629E+06 1.9026 101 2.00 1.0778052681678693E+04 16 c 3 4.2824E+06 1.7771E+06 2.4097 101 2.00 7.0681900560526625E+00 16 c 4 3.3600E+06 1.3273E+06 2.5314 101 2.00 4.1994754168317234E+00 16 c 5 4.4000E+06 3.2965E+06 1.3347 101 2.00 3.2123223577206875E+02 16 c 6 2.6880E+06 2.0630E+06 1.3030 32 2.00 6.0421729517332471E+02 16 c 7 1.4221E+07 5.0709E+06 2.8044 101 2.00 4.4419104210488395E+03 16 c 8 1.7107E+07 8.5283E+06 2.0059 100 2.00 1.0508876039380585E+06 16 c 9 1.4423E+07 5.0662E+06 2.8469 101 2.00 8.3261052698248636E+05 15 c 10 6.9084E+06 8.1696E+06 0.8456 101 2.00 5.1172588490277075E+05 16 c 11 2.5600E+06 2.8390E+06 0.9017 101 2.00 2.4034922852330303E+05 16 c 12 2.7200E+06 2.7422E+06 0.9919 100 2.00 4.9892983915750255E-05 16 c 13 3.6736E+06 5.8005E+06 0.6333 32 2.00 2.4799100425819748E+11 16 c 14 4.4440E+06 5.7100E+06 0.7783 101 2.00 2.1111605770897460E+08 15 c 15 6.6000E+06 1.1588E+07 0.5696 101 2.00 2.7606716832464293E+05 16 c 16 3.0240E+06 2.4488E+06 1.2349 40 2.00 2.2682870000000000E+06 16 c 17 7.2720E+06 3.1101E+06 2.3382 101 2.00 7.8024924103174017E+03 16 c 18 8.7120E+06 4.5518E+06 1.9140 100 2.00 5.2551705030583183E+05 16 c 19 5.5752E+06 4.5499E+06 1.2254 101 2.00 3.7952718721030451E+03 16 c 20 8.3200E+06 5.2934E+06 1.5718 100 2.00 2.1883436251708021E+05 16 c 21 2.5000E+07 1.2970E+07 1.9275 50 2.00 2.7413199222149867E+08 16 c 22 4.8076E+06 4.9544E+06 0.9704 101 2.00 2.0570230635966882E+03 16 c 23 1.0890E+07 4.8564E+06 2.2424 100 2.00 2.4849303510945366E+05 16 c 24 1.2400E+06 1.2491E+06 0.9927 101 2.00 3.5000000000000000E+02 16 c 1 7.0070E+06 3.6093E+06 1.9414 1001 1.00 3.5802568852572696E+05 16 c 2 5.1992E+06 2.7352E+06 1.9009 101 1.00 1.0778052681678693E+04 16 c 3 3.6036E+06 1.1412E+06 3.1576 1001 1.00 7.0052001814645450E+01 15 c 4 3.3600E+06 1.0687E+06 3.1439 1001 1.00 4.1994754168317234E+00 16 c 5 4.0000E+06 3.0664E+06 1.3045 1001 1.00 3.1842101496710871E+04 16 c 6 2.3808E+06 1.7685E+06 1.3462 64 1.00 3.0625814413109896E+04 16 c 7 1.2736E+07 4.6194E+06 2.7571 995 1.00 4.2729757526223321E+05 16 c 8 1.4256E+07 7.1093E+06 2.0053 100 1.00 1.0508876039380585E+06 16 c 9 1.2362E+07 4.3377E+06 2.8500 101 1.00 8.3261052698248636E+05 15 c 10 6.1812E+06 7.3073E+06 0.8459 101 1.00 5.1172588490277075E+05 16 c 11 2.2000E+06 2.4088E+06 0.9133 1001 1.00 2.3400376808550769E+08 16 c 12 2.4000E+06 2.4083E+06 0.9966 1000 1.00 2.0349989059170737E-04 16 c 13 3.2256E+06 5.0663E+06 0.6367 64 1.00 3.4706712065081335E+11 16 c 14 4.4044E+06 6.3818E+06 0.6901 1001 1.00 2.2156947925784698E+10 16 c 15 3.3000E+06 5.7966E+06 0.5693 101 1.00 2.7606716832464293E+05 16 c 16 2.6500E+06 2.0204E+06 1.3116 75 1.00 1.9780320000000000E+06 16 c 17 6.3630E+06 2.7183E+06 2.3408 101 1.00 7.8024924103174017E+03 16 c 18 8.7120E+06 4.5532E+06 1.9134 100 1.00 5.2551705030583183E+05 16 c 19 4.7268E+06 3.8562E+06 1.2258 101 1.00 3.7952718721030451E+03 16 c 20 5.2000E+06 3.5352E+06 1.4709 1000 1.00 2.1284510375458673E+08 16 c 21 2.5250E+07 1.2755E+07 1.9796 101 1.00 5.6017393194626498E+08 16 c 22 3.7774E+06 3.8916E+06 0.9706 101 1.00 2.0570230635966882E+03 16 c 23 8.7120E+06 3.8889E+06 2.2402 100 1.00 2.4849303510945366E+05 16 c 24 1.0000E+06 1.0032E+06 0.9968 1001 1.00 3.5000000000000000E+03 16 c ------ ----- -------- --------- ---- ------ ---------------------- -- c 72 0.4843E+09 0.3110E+09 1.5572 167 1145 c c MFLOPS RANGE: REPORT ALL RANGE STATISTICS: c Maximum Rate = 3.1576 Mega-Flops/Sec. c Quartile Q3 = 2.0059 Mega-Flops/Sec. c Average Rate = 1.5922 Mega-Flops/Sec. c Geometric Mean = 1.4275 Mega-Flops/Sec. c Median Q2 = 1.3462 Mega-Flops/Sec. c Harmonic Mean = 1.2712 Mega-Flops/Sec. c Quartile Q1 = 0.9681 Mega-Flops/Sec. c Minimum Rate = 0.5693 Mega-Flops/Sec. c c c Standard Dev. = 0.7177 Mega-Flops/Sec. c Avg Efficiency = 45.21% Program & Processor c Mean Precision = 15.90 Decimal Digits c <<<<<<<<<<<<<<<<<<<<<<<<<<<*>>>>>>>>>>>>>>>>>>>>>>>>>>> c < BOTTOM-LINE: 72 SAMPLES LFK TEST RESULTS SUMMARY. > c < USE RANGE STATISTICS ABOVE FOR OFFICIAL QUOTATIONS. > c <<<<<<<<<<<<<<<<<<<<<<<<<<<*>>>>>>>>>>>>>>>>>>>>>>>>>>> c1 c1 c c c c c c c SENSITIVITY ANALYSIS c c c The sensitivity of the harmonic mean rate (Mflops) c to various weightings is shown in the table below. c Seven work distributions are generated by assigning c two distinct weights to ranked kernels by quartiles. c Forty nine possible cpu workloads are then evaluated c using seven sets of values for the total weights: c c c ------ ------ ------ ------ ------ ------ ------ c 1st QT: O O O O O X X c 2nd QT: O O O X X X O c 3rd QT: O X X X O O O c 4th QT: X X O O O O O c ------ ------ ------ ------ ------ ------ ------ c Total c Weights Net Mflops: c X O c ---- ---- c c 1.00 0.00 0.75 0.90 1.14 1.40 1.81 2.12 2.56 c c 0.95 0.05 0.77 0.93 1.15 1.39 1.76 1.99 2.40 c c 0.90 0.10 0.79 0.96 1.16 1.37 1.71 1.87 2.26 c c 0.80 0.20 0.84 1.02 1.17 1.34 1.62 1.67 2.01 c c 0.70 0.30 0.89 1.09 1.19 1.32 1.54 1.51 1.82 c c 0.60 0.40 0.96 1.17 1.21 1.29 1.47 1.38 1.66 c c 0.50 0.50 1.03 1.27 1.22 1.27 1.41 1.27 1.52 c ---- ---- c ------ ------ ------ ------ ------ ------ ------ c c c c c c c SENSITIVITY OF NET MFLOPS RATE TO USE OF OPTIMAL FORTRAN CODE(SISD/SIMD MODEL) c c 0.91 1.04 1.22 1.48 1.65 1.87 2.16 2.34 2.55 c c 0.00 0.20 0.40 0.60 0.70 0.80 0.90 0.95 1.00 c Fraction Of Operations Run At Optimal Fortran Rates c c c1 c c c TABLE OF SPEED-UP RATIOS OF MEAN RATES (72 Samples) c c Arithmetic, Geometric, Harmonic Means (AM,GM,HM) c The Geometric Mean is the least biased statistic. c c -------- ---- ------ -------- -------- -------- -------- -------- -------- c SYSTEM MEAN MFLOPS SX-3/14 YMP/1 9000/720 6000/540 CRAY-YMP i486/25 c -------- ---- ------ -------- -------- -------- -------- -------- -------- c c c NEC AM= 311.820 : 1.000 3.986 22.678 22.006 195.844 271.148 c SX-3/14 GM= 95.590 : 1.000 2.610 8.334 8.909 66.965 91.038 c F77v.012 HM= 38.730 : 1.000 2.193 4.242 5.199 30.466 42.098 c SD= 499.780 c c c CRAY AM= 78.230 : 0.251 1.000 5.689 5.521 49.134 68.026 c YMP/1 GM= 36.630 : 0.383 1.000 3.194 3.414 25.661 34.886 c CFT771.2 HM= 17.660 : 0.456 1.000 1.934 2.370 13.892 19.196 c SD= 86.750 c c c HP AM= 13.750 : 0.044 0.176 1.000 0.970 8.636 11.957 c 9000/720 GM= 11.470 : 0.120 0.313 1.000 1.069 8.035 10.924 c f77 8.05 HM= 9.130 : 0.236 0.517 1.000 1.226 7.182 9.924 c SD= 7.510 c c c IBM AM= 14.170 : 0.045 0.181 1.031 1.000 8.900 12.322 c 6000/540 GM= 10.730 : 0.112 0.293 0.935 1.000 7.517 10.219 c XL v0.90 HM= 7.450 : 0.192 0.422 0.816 1.000 5.860 8.098 c SD= 9.590 c c c SUN AM= 1.592 : 0.005 0.020 0.116 0.112 1.000 1.385 c SPARC 1+ GM= 1.427 : 0.015 0.039 0.124 0.133 1.000 1.359 c f77 V1.4 HM= 1.271 : 0.033 0.072 0.139 0.171 1.000 1.382 c SD= 0.718 c c c COMPAQ AM= 1.150 : 0.004 0.015 0.084 0.081 0.722 1.000 c i486/25 GM= 1.050 : 0.011 0.029 0.092 0.098 0.736 1.000 c HM= 0.920 : 0.024 0.052 0.101 0.123 0.724 1.000 c SD= 0.480 c c c Version: 22/DEC/86 MF508 c CHECK FOR CLOCK CALIBRATION ONLY: c Total Job Cpu Time = 2.47860E+03 Sec. c Total 24 Kernels Time = 2.17686E+03 Sec. c Total 24 Kernels Flops= 3.38982E+09 Flops C C F.H.MCMAHON 1991 C********************************************************************** c C cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) DOUBLE PRECISION sum REDUNDNT C C/ PARAMETER( kn= 47, kn2= 95, np= 3, ls= 3*47, krs= 24) C/ PARAMETER( nk= 47, nl= 3, nr= 8 ) parameter( nt= 4 ) C CHARACTER NAME*8 CHARACTER Komput*24, Kontrl*24, Kompil*24, Kalend*24, Identy*24 C COMMON /SYSID/ Komput, Kontrl, Kompil, Kalend, Identy COMMON /ALPHA/ mk,ik,im,ml,il,Mruns,Nruns,jr,iovec,NPFS(8,3,47) COMMON /BETA / tic, TIMES(8,3,47), SEE(5,3,8,3), 1 TERRS(8,3,47), CSUMS(8,3,47), 2 FOPN(8,3,47), DOS(8,3,47) C COMMON /SPACE0/ TIME(47), CSUM(47), WW(47), WT(47), ticks, 1 FR(9), TERR1(47), SUMW(7), START, 2 SKALE(47), BIAS(47), WS(95), TOTAL(47), FLOPN(47), 3 IQ(7), NPF, NPFS1(47) C COMMON /SPACEI/ WTP(3), MUL(3), ISPAN(47,3), IPASS(47,3) C DIMENSION NAME(nt), RATE(nt) DIMENSION FLOPS(141), TR(141), RATES(141) DIMENSION LSPAN(141), WG(141), OSUM (141), ID(141) DIMENSION HM(12), LVL(10) DIMENSION LQ(5), STAT1(20), STAT2(20) DIMENSION IN(141), CSUM1(141), TV4(141), TV5(141) DIMENSION MAP1(141), MAP2(141), MAP3(141), IN2(141), VL1(141) DIMENSION MAP(141), VL(141), TV(141), TV1(141), TV2(141) DIMENSION FLOPS1(141), RT1(141), ISPAN1(141), WT1(141) DIMENSION FLOPS2(141), RT2(141), ISPAN2(141), WT2(141) SAVE kall, LVL C MODI(i,mm)= (MOD( ABS(i)-1, mm) + 1) C DATA kall/0/ C CALL TRACE ('REPORT ') C IF( iou.LT.0) GO TO 73 C meff= 0 neff= 0 fuzz= 1.0d-9 DO 1000 k= 1,ntk VL(k)= LSPAN(k) 1000 CONTINUE C bl= 1.0d-5 bu= 1.0d+5 CALL VALID( TV,MAP,neff, bl, RATES, bu, ntk) C C Compress valid data sets mapping on MAP. C nd= 0 DO 1 k= 1,neff MAP1(k)= MODI( MAP(k),nek) FLOPS1(k)= FLOPS( MAP(k)) RT1(k)= TR( MAP(k)) VL1(k)= VL( MAP(k)) ISPAN1(k)= LSPAN( MAP(k)) WT1(k)= WG( MAP(k)) TV1(k)= RATES( MAP(k)) CSUM1(k)= OSUM( MAP(k)) nd= ID( MAP(k)) + nd 1 continue IF( nd .LE. 8*neff ) nd= nd - 16*((neff-1+24)/24) precis= REAL(nd)/( REAL(neff) + fuzz) C som= 0.00d0 sum= 0.00d0 DO 11 k= 1,neff som= som + FLOPS1(k) sum= sum + RT1(k) 11 continue rneto= som/(sum + fuzz) C CALL STATW( STAT1,TV,IN, VL1,WT1,neff) lv= STAT1(1) C CALL STATW( STAT1,TV,IN, TV1,WT1,neff) twt= STAT1(6) C compute average efficiency= GM/Max kall= kall + 1 peak= 0.00d0 if( kall.LE.1 .OR. il.EQ.im ) then peak= STAT1(4) endif avgeff= (100.0d0* STAT1(10))/( peak + fuzz) C WRITE ( iou,7001) WRITE ( iou,7001) WRITE ( iou,7001) WRITE ( iou,7001) WRITE ( iou,7001) WRITE ( iou,7001) CALL PAGE( iou) WRITE ( iou,7002) C IF( ntk .EQ. nek ) THEN WRITE ( iou,7003) ELSE WRITE ( iou,7090) ENDIF C WRITE ( iou,7002) WRITE ( iou,7007) Komput WRITE ( iou,7057) Kontrl WRITE ( iou,7008) Kompil WRITE ( iou,7038) Kalend WRITE ( iou,7039) Identy WRITE ( iou,7061) WRITE ( iou,7062) WRITE ( iou,7063) WRITE ( iou,7064) WRITE ( iou,7065) WRITE ( iou,7066) WRITE ( iou,7067) WRITE ( iou,7071) WRITE ( iou,7072) WRITE ( iou,7068) WRITE ( iou,7069) c WRITE ( iou,7001) WRITE ( iou,7004) WRITE ( iou,7005) WRITE ( iou,7011) (MAP1(k), FLOPS1(k), RT1(k), TV1(k), . ISPAN1(k), WT1(k), CSUM1(k), ID(k), k=1,neff) WRITE ( iou,7005) C WRITE ( iou,7023) neff, som, sum, rneto, lv, nd WRITE ( iou,7022) WRITE ( iou,7009) lv WRITE ( iou,7010) ntk WRITE ( iou,7041) STAT1( 4) WRITE ( iou,7037) STAT1(14) WRITE ( iou,7033) STAT1( 1) WRITE ( iou,7043) STAT1(10) WRITE ( iou,7030) STAT1( 7) WRITE ( iou,7055) STAT1( 5) WRITE ( iou,7036) STAT1(13) WRITE ( iou,7042) STAT1( 3) WRITE ( iou,7001) WRITE ( iou,7044) STAT1( 2) WRITE ( iou,7091) avgeff WRITE ( iou,7034) precis C IF( ntk .NE. nek ) THEN WRITE ( *,7001) WRITE ( *,7002) WRITE ( *,7090) WRITE ( *,7002) WRITE ( *,7007) Komput WRITE ( *,7057) Kontrl WRITE ( *,7008) Kompil WRITE ( *,7038) Kalend WRITE ( *,7039) Identy WRITE ( *,7022) WRITE ( *,7009) lv WRITE ( *,7010) ntk WRITE ( *,7041) STAT1( 4) WRITE ( *,7037) STAT1(14) WRITE ( *,7033) STAT1( 1) WRITE ( *,7043) STAT1(10) WRITE ( *,7030) STAT1( 7) WRITE ( *,7055) STAT1( 5) WRITE ( *,7036) STAT1(13) WRITE ( *,7042) STAT1( 3) WRITE ( *,7001) WRITE ( *,7044) STAT1( 2) WRITE ( *,7091) avgeff WRITE ( *,7034) precis ENDIF C C WRITE ( iou,7031) STAT1( 9) C WRITE ( iou,7032) STAT1(15) C 7001 FORMAT(/) 7002 FORMAT( 45H ******************************************** ) 7003 FORMAT( 45H THE LIVERMORE FORTRAN KERNELS: M F L O P S ) 7090 FORMAT( 45H THE LIVERMORE FORTRAN KERNELS: * SUMMARY * ) 7004 FORMAT(/,53H KERNEL FLOPS MICROSEC MFLOP/SEC SPAN WEIGHT CH, X23HECK-SUMS OK ) 7005 FORMAT( 53H ------ ----- -------- --------- ---- ------ --, X23H-------------------- -- ) 7007 FORMAT(/,9X,16H Computer : ,A ) f77 7057 FORMAT( 9X,16H System : ,A ) f77 7008 FORMAT( 9X,16H Compiler : ,A ) f77 7038 FORMAT( 9X,16H Date : ,A ) f77 7039 FORMAT( 9X,16H Testor : ,A ) f77 c7009 FORMAT(/,9X,16H Computer : ,A8) f66 c7057 FORMAT( 9X,16H System : ,A8) f66 c7008 FORMAT( 9X,16H Compiler : ,A8) f66 c7038 FORMAT( 9X,16H Date : ,A8) f66 7009 FORMAT( 9X,16HMean DO Span = ,I5) 7010 FORMAT( 9X,16HCode Samples = ,I5) 7011 FORMAT(1X,i2,1PE11.4,E11.4,0PF12.4,1X,I4,1X,F6.2,1PE24.16,1X,I2) C7011 FORMAT(1X,i2,E11.4,E11.4,F12.4,1X,I4,1X,F6.2,E35.25,1X,I2) 7012 FORMAT(1X,i2,E11.4,E11.4,F12.4,1X,I4,1X,F6.2) 7023 FORMAT(1X,i2,E11.4,E11.4,F12.4,1X,I4,30X,I4) c7022 FORMAT(/,15H MFLOPS RANGE:,23X,28HREPORT ALL RANGE STATISTICS: ) f66 7022 FORMAT(/,9X,'MFLOPS RANGE:',13X,'REPORT ALL RANGE STATISTICS:') f77 7041 FORMAT(/,9X,16HMaximum Rate = ,F12.4,16H Mega-Flops/Sec. ) 7037 FORMAT( 9X,16HQuartile Q3 = ,F12.4,16H Mega-Flops/Sec. ) 7033 FORMAT( 9X,16HAverage Rate = ,F12.4,16H Mega-Flops/Sec. ) 7043 FORMAT( 9X,16HGeometric Mean = ,F12.4,16H Mega-Flops/Sec. ) 7030 FORMAT( 9X,16HMedian Q2 = ,F12.4,16H Mega-Flops/Sec. ) 7055 FORMAT( 9X,16HHarmonic Mean = ,F12.4,16H Mega-Flops/Sec. ) 7036 FORMAT( 9X,16HQuartile Q1 = ,F12.4,16H Mega-Flops/Sec. ) 7042 FORMAT( 9X,16HMinimum Rate = ,F12.4,16H Mega-Flops/Sec. ) 7044 FORMAT( 9X,16HStandard Dev. = ,F12.4,16H Mega-Flops/Sec. ) c7031 FORMAT( 9X,16HMedian Dev. = ,F12.4,16H Mega-Flops/Sec. ) c7032 FORMAT( 9X,16HGeom.Mean Dev. = ,F12.4,16H Mega-Flops/Sec. ) 7091 FORMAT( 9X,16HAvg Efficiency = ,F10.2,22H% Program & Processor) 7034 FORMAT( 9X,16HMean Precision = ,F10.2,17H Decimal Digits ) 7053 FORMAT(/,9X,16HFrac. Weights = ,F12.4) 7104 FORMAT(/,50H KERNEL FLOPS MICROSEC MFLOP/SEC SPAN WEIGHT ) 7105 FORMAT( 50H ------ ----- -------- --------- ---- ------ ) C 7061 FORMAT(/,9X,50HWhen the computer performance range is very large ) 7062 FORMAT(9X,52Hthe net Mflops rate of many Fortran programs and ) 7063 FORMAT(9X,52Hworkloads will be in the sub-range between the equi-) 7064 FORMAT(9X,52Hweighted Harmonic and Arithmetic means depending ) 7065 FORMAT(9X,52Hon the degree of code parallelism and optimization. ) c7066 FORMAT(9X,52HMore accurate estimates of cpu workload rates depend) c7067 FORMAT(9X,52Hon assigning appropriate weights for each kernel. ) c7066 FORMAT(9X,52HThe best central measure is the Geometric Mean of 72) c7067 FORMAT(9X,52Hrates which must be quoted +- a standard deviation. ) 7066 FORMAT(9X,'The least biased central measure is the Geometric ') 7067 FORMAT(9X,'Mean of 72 rates, quoted +- a standard deviation.') 7068 FORMAT(9X,'LFK test measures a lower bound for a Multi-processor') 7069 FORMAT(9X,'and N * LFK rates project an upper bound for N-procs.') 7071 FORMAT(9X,'Mean Mflops rates imply the average efficiency of a') 7072 FORMAT(9X,'computing system since the peak rate is well known.') C NAME(1)= Komput NAME(2)= Komput NAME(3)= Kompil RATE(1)= STAT1(1) RATE(2)= STAT1(10) RATE(3)= STAT1(5) RATE(4)= STAT1(2) C IF( ntk .NE. nek ) THEN WRITE( iou,7099) WRITE( iou,7097) WRITE( iou,7098) WRITE( iou,7099) 7097 FORMAT(' < BOTTOM-LINE: 72 SAMPLES LFK TEST RESULTS SUMMARY. >') 7098 FORMAT(' < USE RANGE STATISTICS ABOVE FOR OFFICIAL QUOTATIONS. >') 7099 FORMAT(' <<<<<<<<<<<<<<<<<<<<<<<<<<<*>>>>>>>>>>>>>>>>>>>>>>>>>>>') CALL PAGE( iou) C IF( iovec.EQ.1 ) THEN WRITE ( iou,7070) 7070 FORMAT(//,50H TOP QUARTILE: BEST ARCHITECTURE/APPLICATION MATCH ) C C Compute compression index-list MAP1: Non-zero weights. C bl= 1.0d-6 bu= 1.0d+6 CALL VALID( TV,MAP1,meff, bl, WT1, bu, neff) C C Re-order data sets mapping on IN (descending order of MFlops). C DO 2 k= 1,meff MAP3(k)= IN( MAP1(k)) 2 continue C IF( meff.GT.0 ) THEN CALL TRAP( MAP3, 8H REPORT , 1, neff,meff) ENDIF C DO 3 k= 1,meff i= MAP3(k) FLOPS2(k)= FLOPS1(i) RT2(k)= RT1(i) ISPAN2(k)= ISPAN1(i) WT2(k)= WT1(i) TV2(k)= TV1(i) MAP2(k)= MODI( MAP(i),nek) 3 continue C Sort kernels by performance into quartiles nq= meff/4 lo= meff -4*nq LQ(1)= nq LQ(2)= nq + nq + lo LQ(3)= nq i2= 0 C DO 5 j= 1,3 i1= i2 + 1 i2= i2 + LQ(j) ll= i2 - i1 + 1 CALL STATW( STAT2,TV,IN2, TV2(i1),WT2(i1),ll) frac= STAT2(6)/( twt +fuzz) C WRITE ( iou,7001) WRITE ( iou,7104) WRITE ( iou,7105) WRITE ( iou,7012) ( MAP2(k), FLOPS2(k), RT2(k), TV2(k), . ISPAN2(k), WT2(k), k=i1,i2 ) WRITE ( iou,7105) C WRITE ( iou,7053) frac WRITE ( iou,7033) STAT2(1) WRITE ( iou,7055) STAT2(5) WRITE ( iou,7044) STAT2(2) 5 continue C ENDIF C ENDIF C C Sensitivity analysis of harmonic mean rate to 49 workloads C CALL SENSIT( iou,RATES,WG,IQ,SUMW, MAP,TV,TV4,TV2,TV5, ntk) C C C Sensitivity analysis of harmonic mean rate to SISD/SIMD model C CALL SIMD( HM, iou,RATES,WG,FR,9, MAP,TV,TV4,TV2, ntk) C C IF( ntk .NE. nek ) THEN IF( iovec.EQ.1 ) THEN CALL PAGE( iou) mrl= Nruns IF( Nruns.gt.8) mrl= 8 C DO 8 k= 1,mk DO 8 j= im,ml sum= 0.0d0 DO 8 i= 1,mrl sum= sum + CSUMS(i,j,k) CSUMS(i,j,k)= sum 8 continue C DO 10 i= 1,mrl IF( (i.NE.1).AND.(i.NE.mrl)) GO TO 10 WRITE( iou,76) i WRITE( iou,77) ( LVL(j), j= 1,3 ) 76 FORMAT( //,29h Cumulative Checksums: RUN=,i5) 77 FORMAT( /,10h k VL=,i5,3i24) C DO 9 k= 1,mk WRITE( iou,78) k, ( CSUMS(i,j,k), j= 1,3) 78 FORMAT( 1X,I2,4E24.16) 9 continue 10 continue ENDIF C CALL SPEDUP( iou, NAME, RATE ) ENDIF LVL(il)= lv 73 CONTINUE CALL TRACK ('REPORT ') RETURN C END C********************************************** SUBROUTINE RESULT( iou,FLOPS,TR,RATES,LSPAN,WG,OSUM,TERR,ID) C*********************************************************************** C * C RESULT - Computes timing Results into pushdown store. * C * C iou - Input IO unit number for print output * C FLOPS - Out.Ary Number of Flops executed by each kernel * C TR - Out.Ary Time of execution of each kernel(microsecs) * C RATES - Out.Ary Rate of execution of each kernel(megaflops/sec)* C LSPAN - Out.Ary Span of inner DO loop in each kernel * C WG - Out.Ary Weight assigned to each kernel for statistics * C OSUM - Out.Ary Checksums of the results of each kernel * C TERR - Out.Ary Experimental timing errors per kernel * C ID - Out.Ary Number of valid digits in checksum. * C * C*********************************************************************** C cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) DOUBLE PRECISION SUMS, cs REDUNDNT C C/ PARAMETER( kn= 47, kn2= 95, np= 3, ls= 3*47, krs= 24) C/ PARAMETER( nk= 47, nl= 3, nr= 8 ) C COMMON /ALPHA/ mk,ik,im,ml,il,Mruns,Nruns,jr,iovec,NPFS(8,3,47) COMMON /TAU/ tclock, tsecov, testov, cumtim(4) COMMON /BETA / tic, TIMES(8,3,47), SEE(5,3,8,3), 1 TERRS(8,3,47), CSUMS(8,3,47), 2 FOPN(8,3,47), DOS(8,3,47) C DIMENSION FLOPS(141), TR(141), RATES(141), ID(141) DIMENSION LSPAN(141), WG(141), OSUM (141), TERR(141) C COMMON /SPACE0/ TIME(47), CSUM(47), WW(47), WT(47), ticks, 1 FR(9), TERR1(47), SUMW(7), START, 2 SKALE(47), BIAS(47), WS(95), TOTAL(47), FLOPN(47), 3 IQ(7), NPF, NPFS1(47) C COMMON /SPACEI/ WTP(3), MUL(3), ISPAN(47,3), IPASS(47,3) C COMMON /SPACES/ ion,j5,k2,k3,MULTI,laps,Loop,m,kr,LP,n13h,ibuf,nx, 1 L,npass,nfail,n,n1,n2,n13,n213,n813,n14,n16,n416,n21,nt1,nt2, 2 last,idebug,mpy,Loops2,mucho,mpylim, intbuf(16) C COMMON /PROOF/ SUMS(24,3,8) C C CALL TRACE ('RESULT ') C CALL TALLY( iou, 1 ) C C Push Result Arrays Down before entering new result isum= 0 limit= 141 - mk j = 141 DO 1001 k = limit,1,-1 FLOPS(j)= FLOPS(k) TR(j)= TR(k) RATES(j)= RATES(k) LSPAN(j)= LSPAN(k) WG(j)= WG(k) OSUM(j)= OSUM(k) TERR(j)= TERR(k) ID(j)= ID(k) j = j - 1 1001 CONTINUE C C CALCULATE MFLOPS FOR EACH KERNEL C setting RATES(k)= 0. deletes kernel k from REPORT. tmin= 1.0d0*tsecov DO 1010 k = 1,mk FLOPS(k)= FLOPN(k)*TOTAL(k) TR(k)= TIME(k) * 1.0d+6 RATES(k)= 0.0d0 IF( TR(k).NE. 0.0d0) RATES(k)= FLOPS(k)/TR(k) IF( WT(k).LE. 0.0d0) RATES(k)= 0.0d0 IF( TIME(k).LT.tmin) RATES(k)= 0.0d0 IF( TIME(k).LE. 0.0d0) RATES(k)= 0.0d0 LSPAN(k)= ISPAN(k,il) WG(k)= WT(k)*WTP(il) OSUM(k)= CSUM(k) TERR(k)= TERR1(k) c c compute relative error and digits of precision in CSUM c c ijk= 4 IF( MULTI.LE. 1 ) ijk= 1 IF( MULTI.EQ. 10 ) ijk= 2 IF( MULTI.EQ. 50 ) ijk= 3 IF( MULTI.GE. 100 ) ijk= 4 cs= REAL( Nruns) * SUMS(k,il,ijk) TERR1(k)= cs 1010 CONTINUE C CALL SEQDIG( ID, isum, TERR1, CSUM, mk) C CALL TRACK ('RESULT ') RETURN END C C C********************************************** FUNCTION SECOND( OLDSEC) C*********************************************** cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) CLOX REAL*8 SECOND C C SECOND= Cumulative CPU time for job in seconds. MKS unit is seconds. C Clock resolution should be less than 2% of Kernel 11 run-time. C ONLY CPU time should be measured, NO system or I/O time included. C In VM systems, page-fault time must be avoided (Direction 8). C SECOND accuracy may be tested by calling: CALIBR test. C C IF your system provides a timing routine that satisfies C the definition above; THEN simply delete this function. C C ELSE this function must be programmed using some C timing routine available in your system. C Timing routines with CPU-clock resolution are always sufficient. C Timing routines with microsec. resolution are usually sufficient. C C Timing routines with much less resolution have required the use C of multiple-pass loops around each kernel to make the run time C at least 50 times the tick-period of the timing routine. C Function SECOVT measures the overhead time for a call to SECOND. C C If no CPU timer is available, then you can time each kernel by C the wall clock using the PAUSE statement at the end of func. TEST. C C An independent calibration of the running time may be wise. C Compare the Total Job Cpu Time printout at end of the LFK output file C with the job Cpu time charged by your operating system. C C Default, uni-processor tests measure job Cpu-time in SECOND (TSS mode). C Parallel processing tests should measure Real-time in stand-alone mode. C C The following statement is deliberately incomplete: C c SECOND= sdef C USE THE HIGHEST RESOLUTION CPU-TIMER FUNCTION AVAILABLE C******************************************************************************* C C The following statements were used on UNIX 4.2bsd systems, e.g. SUN C Time Resolution of ETIME is poor= 0.01 Sec. C REAL*4 CPUTYM(4), ETIME unix XT= ETIME( CPUTYM) unix SECOND= CPUTYM(1) unix C C or c REAL*4 XTIME(4) unix c INTEGER CLOCK unix c EXTERNAL CLOCK unix c XT = REAL( CLOCK( XTIME)) * 1.00d-6 unix c SECOND= XT unix C C******************************************************************************* C C The following statements were used on the DEC VAX/780 VMS 3.0 . C Enable page-fault tallys in TEST by un-commenting LIB$STAT_TIMER calls. C Clock resolution is 0.01 Sec. C C DATA INITIA /123/ C IF( INITIA.EQ.123 ) THEN C INITIA= 1 C NSTAT = LIB$INIT_TIMER() C ELSE C NSTAT = LIB$STAT_TIMER(2,ISEC) C SECOND= REAL(ISEC)*0.01 - OLDSEC C ENDIF C C* OR less accurately: C* REAL SECNDS C* SECOND= SECNDS( OLDSEC) C C***************************************************************************** C C The following statements were used on the IBM RS/6000 C Contrary to what the manual states, INTEGER FUNCTION MCLOCK() C returns the number of ticks with 100 ticks being one second. C CIBMRS integer itemp, MCLOCK CIBMRS external MCLOCK C CIBMRS itemp = MCLOCK() CIBMRS SECOND= REAL(itemp)/100.00d0 C C******************************************************************************* C The following statements were used on the DEC PDP-11/23 RT-11 system. C C* DIMENSION JT(2) C* CALL GTIM(JT) C* TIME1 = JT(1) C* TIME2 = JT(2) C* TIME = TIME1 * 65768. + TIME2 C* SECOND=TIME/60. - OLDSEC C******************************************************************************* C C The following statements were used on the Hewlett-Packard HP 9000 C C* INTEGER*4 ITIME(4) C* CALL TIMES( ITIME(4)) C* TIMEX= ITIME(1) + ITIME(2) + ITIME(3) + ITIME(4) C* SECOND= TIMEX/60. - OLDSEC C C******************************************************************************* C C FOR THE GOULD 32/87 WITH MPX 3.2 (et seq. gratis D.Lindsay) C C INTEGER*4 NSEC, NCLICK C REAL*8 CPUTIM C C CALL M:CLOCK (NSEC, NCLICK) C CPUTIM = FLOAT(NSEC) C SECOND = CPUTIM + FLOAT(NCLICK)/60. C C******************************************************************************* C C FOR THE HP 1000 RUNNING FORTRAN 77. C note that since the hp operating system has no facility for C returning cpu time, this routine only measures elapsed time. C therefore, the tests must be run stand-alone. C C REAL*8 TOTIME C INTEGER*2 TIMEA(5) C C CALL EXEC (11, TIMEA) C TOTIME = DBLE (TIMEA(1))/100. C TOTIME = TOTIME + DBLE (TIMEA(2)) C TOTIME = TOTIME + DBLE (TIMEA(3)) * 60. C SECOND = TOTIME + DBLE (TIMEA(4)) * 3600. C C******************************************************************************* C C FOR THE PR1ME SYSTEM UNDER PRIMOS C C REAL*8 CPUTIM C INTEGER*2 TIMERS (28) C C CALL TMDAT (TIMERS) C SECOND = DBLE (TIMERS(7)) C .+ DBLE(TIMERS(8)) / DBLE(TIMERS(11)) C C******************************************************************************* C C The following statements were used on the Stellar C C REAL DUMMY(8) C INTEGER*4 TIMES$ C SAVE IOFSET C ITIME= TIMES$( DUMMY) C IF( IOFSET.EQ.0 ) IOFSET= ITIME C SECOND= (ITIME - IOFSET)/100.0 - OLDSEC C******************************************************************************* C C The following statements were used on the IBM 3090 VM system. C Clock resolution is 1 microsec. C C SECOND= IOCPU(0.0d0)* 1.0d-6 C C******************************************************************************* C C The following statement was used on the IBM 3090 MVS C C** CALL TODD( xtime) c TODD returns microsecs in REAL*8 form c TODD provides 1/16th of a microsecond precision C** xtime = xtime * 1.0D-6 C SECOND= xtime - oldsec C C******************************** C REAL*4 TIME(4) C xtime = 0.0D-6 C CALL VCLOCK(time(1)) C xtime = time(1) C SECOND= xtime - oldsec C C******************************** C The following statement was used on the IBM 4381, 9370 C C real*8 elapsed(2),cpu(2) C call timer(elapsed,cpu) C second = cpu(1) - oldsec C C C******************************************************************************* C C The following statements were used on the IBM PC Professional Fortran. C Clock resolution is 0.01 Sec. C C INTEGER*2 IHR,IMIN,ISEC,IS100 C CALL GETTIM(IHR,IMIN,ISEC,IS100) C ISECT=(JFIX(IHR)*60+JFIX(IMIN))*60+JFIX(ISEC) C SECOND=FLOAT(ISECT)+FLOAT(IS100)/100.0 C C******************************************************************************* C C THE FOLLOWING STATEMENTS ARE USED ON IBM-PC WITH LAHEY COMPILER C** SECOND= REAL( MOD( ITICKS, 1000000)) * 1.0D-2 C C** INTEGER*4 ITICKS C** CALL TIMER( ITICKS) C** SECOND= REAL( ITICKS ) * 1.0D-2 C C INTEGER*4 I1, ITICK0, ITICKS C SAVE I1, ITICK0 C DATA I1/-357/, ITICK0/0/ CC C IF( I1.EQ.(-357)) THEN C CALL TIMER( ITICK0) C ENDIF C I1 = 7 C CALL TIMER( ITICKS) C SECOND = REAL( ITICKS - ITICK0 ) * 1.0D-2 C C C******************************************************************************* C C FOR THE IBM PC. C note that the pc's operating system has no facility for C returning cpu time; this routine only measures elapsed time. C also, the pc does not have real*8. Remove all references to real*8 C C IMPLICIT INTEGER*4 (I-N) C LOGICAL FIRST C DATA FIRST /.TRUE./ C C CALL GETTIM (IYEAR, IMONTH, IDAY, IHOUR, IMIN, ISEC, IFRACT) C C ifract is integer fractions of a second C in units of 1/32,768 seconds C C IF (.NOT. FIRST) GO TO 10 C FIRST = .FALSE. C C LASTHR = IHOUR C BASETM = 0. C10 CONTINUE C C because of limited precision, do not include the time of day C in hours in the total time. but correct for an hour change. C C IF (LASTHR .EQ. IHOUR) GO TO 20 C BASETM = BASETM + 3600. C LASTHR = IHOUR C C20 TOTIME = FLOAT(IMIN) * 60 C . + FLOAT(ISEC) C . + FLOAT(IFRACT)/32768. C SECOND = TOTIME + BASETM C C RETURN END c c c C C*********************************************************************** FUNCTION SECOVT( iou ) C*********************************************************************** C * C SECOVT - Measures the Overhead time for calling SECOND C toler - tolerance for convergence= Relative error : 0.02 C iou - I/O unit number C*********************************************************************** C cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) CLOX REAL*8 SECOND C DIMENSION TIM(20), TER(20), TMX(20), INX(20) COMMON /FAKE1/ t0,t1,t2,t3,t4,t5,t6,t7,t8,t9,t10,t11(20),t12(20) COMMON /FAKE2/ tcum(20) C CALL TRACE ('SECOVT ') C C*********************************************************************** C Measure tsecov: Overhead time for calling SECOND C*********************************************************************** C tseco= 0.000d0 klm= 1600 io= ABS(iou) jj= 0 C DO 820 j= 1,15 C DO 803 i= 1,10 t12(i)= 0.000d0 803 continue tcum(1)= 0.000d0 t0= SECOND( tcum(1)) C assure that 10 calls to SECOND are NOT optimized DO 810 k= 1,klm DO 805 i= 1,10 tcum(i)= t12(i) 805 continue t1= SECOND( tcum(1)) t2= SECOND( tcum(2)) t3= SECOND( tcum(3)) t4= SECOND( tcum(4)) t5= SECOND( tcum(5)) t6= SECOND( tcum(6)) t7= SECOND( tcum(7)) t8= SECOND( tcum(8)) t9= SECOND( tcum(9)) t10= SECOND( tcum(10)) 810 continue elapst= t10 - t0 tseco= elapst/( REAL(10*klm) + 1.0e-9) toler= 0.020d0 rerr= 1.000d0 C C Convergence test: Rel.error .LT. 1% IF( elapst.GT. 1.00d04 ) GO TO 911 IF( elapst.LT. 1.00d-10 .AND. j.GT.10 ) GO TO 911 IF( elapst.GT. 1.00d-9 ) THEN jj= jj + 1 TIM(jj)= tseco IF( jj.GT.1 ) THEN rerr= RELERR( TIM(jj), TIM(jj-1)) ENDIF TER(jj)= rerr ENDIF C IF( iou.GT.0 ) THEN WRITE( iou,64) 10*klm, tseco, rerr ENDIF IF( rerr .LT. toler ) GO TO 825 IF( elapst.GT. 10.00d0 ) GO TO 822 klm= klm + klm 820 continue C Poor accuracy on exit from loop 822 IF( j .LE. 1 ) GO TO 911 IF( jj.LT. 1 ) GO TO 911 CALL SORDID( INX,TMX, TER,jj,1) C i= 0 823 i= i + 1 tseco= TIM( INX(i)) rerr= TMX(i) IF( tseco.LE. 0.00d0 .AND. i.LT.jj ) GO TO 823 C IF( rerr.GT. 0.050d0 ) THEN WRITE( io,63) 100.00d0 * rerr ENDIF C Good convergence, satifies 1% error tolerence 825 SECOVT = tseco C CALL TRACK ('SECOVT ') RETURN C 911 WRITE( io,61) WRITE( io,62) elapst, j CALL WHERE(0) C 61 FORMAT(1X,'FATAL(SECOVT): cant measure overhead time subr SECOND') 62 FORMAT(/,13X,'using SECOND: elapst=',1E20.8,6X,'J=',I4) 63 FORMAT(1X,'WARNING(SECOVT): SECOND overhead time relerr',f9.4,'%') 64 FORMAT('SECOVT:',I10,E12.4,F11.4) END C C*********************************************************************** SUBROUTINE SENSIT( iou, RATES,WG,IQ,SUMW, MAP,TV,TV1,TV2,TV3,n) C*********************************************************************** C * C SENSIT - Sensitivity Of Harmonic Mean Rate(Mflops) 49 Workloads * C * C iou - input scalar, i/o unit number * C RATES - input array , execution rates (Mflops) * C WG - input array , weights paired with RATES * C IQ - input array , 1 or 2 quartiles specifier * C SUMW - input array , workload fractions. * C * C MAP,TV,TV1,TV2,TV3 - output temporary arrays * C n - input scalar, number of rates, etc. * C * C*********************************************************************** C cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) C c In DIMENSION RATES(n), WG(n), IQ(7), SUMW(7) c Temp DIMENSION MAP(n), TV(n), TV1(n), TV2(n), TV3(n) DIMENSION NR1(10), NR2(10), STAT2(20) c DIMENSION TAG(4) f66 CHARACTER*8 TAG(4) f77 SAVE TAG C DATA ( TAG(i), i= 1,4) . /'1st QT: ', '2nd QT: ', '3rd QT: ', '4th QT: '/ f77 c ./8H1st QT: , 8H2nd QT: , 8H3rd QT: , 8H4th QT: / f66 C CALL TRACE ('SENSIT ') C C Compress valid data sets RATES, mapping on MAP. meff= 0 neff= 0 bl= 1.0d-5 bu= 1.0d+5 CALL VALID( TV1,MAP,neff, bl, RATES, bu, n) DO 1 k= 1,neff TV3(k)= WG( MAP(k)) 1 continue C Compress valid data sets WG, mapping on MAP. CALL VALID( TV3,MAP,meff, bl, TV3, bu, neff) DO 3 k= 1,meff TV(k)=TV1( MAP(k)) 3 continue C C Sort selected rates into descending order CALL SORDID( MAP,TV2, TV,meff,2) C C CALL PAGE( iou) WRITE ( iou,7001) C 7001 FORMAT(/) 7301 FORMAT(9X,31H SENSITIVITY ANALYSIS ) 7302 FORMAT(9X,52HThe sensitivity of the harmonic mean rate (Mflops) ) 7303 FORMAT(9X,52Hto various weightings is shown in the table below. ) 7304 FORMAT(9X,52HSeven work distributions are generated by assigning ) 7305 FORMAT(9X,52Htwo distinct weights to ranked kernels by quartiles.) 7306 FORMAT(9X,52HForty nine possible cpu workloads are then evaluated) 7307 FORMAT(9X,52Husing seven sets of values for the total weights: ) 7341 FORMAT(3X,A ,6X,43HO O O O O X X) f77 7342 FORMAT(3X,A ,6X,43HO O O X X X O) f77 7343 FORMAT(3X,A ,6X,43HO X X X O O O) f77 7344 FORMAT(3X,A ,6X,43HX X O O O O O) f77 c7341 FORMAT(3X,A7,6X,43HO O O O O X X) f66 c7342 FORMAT(3X,A7,6X,43HO O O X X X O) f66 c7343 FORMAT(3X,A7,6X,43HO X X X O O O) f66 c7344 FORMAT(3X,A7,6X,43HX X O O O O O) f66 7346 FORMAT(13X, 48H------ ------ ------ ------ ------ ------ ------) 7348 FORMAT(3X,5HTotal,/,3X,7HWeights,20X,11HNet Mflops:,/,4X,6HX O) 7349 FORMAT(2X,9H---- ---- ) 7220 FORMAT(/,1X,2F5.2,1X,7F7.2) C WRITE ( iou,7001) WRITE ( iou,7001) WRITE ( iou,7301) WRITE ( iou,7001) WRITE ( iou,7302) WRITE ( iou,7303) WRITE ( iou,7304) WRITE ( iou,7305) WRITE ( iou,7306) WRITE ( iou,7307) WRITE ( iou,7001) WRITE ( iou,7346) WRITE ( iou,7341) TAG(1) WRITE ( iou,7342) TAG(2) WRITE ( iou,7343) TAG(3) WRITE ( iou,7344) TAG(4) WRITE ( iou,7346) WRITE ( iou,7348) WRITE ( iou,7349) C IF( meff .LE. 0 ) GO TO 73 fuzz= 1.0d-9 r= meff mq= (meff+3)/4 q= mq j= 1 DO 21 i= 8,2,-2 NR1(i )= j NR1(i+1)= j NR2(i )= j + mq + mq - 1 NR2(i+1)= j + mq - 1 j= j + mq 21 continue C DO 29 j= 1,7 sumo= 1.0d0 - SUMW(j) DO 27 i= 1,7 p= IQ(i)*q xt= SUMW(j)/(p + fuzz) ot= sumo /(r - p + fuzz) DO 23 k= 1,meff TV3(k)= ot 23 continue k1= NR1(i+2) k2= NR2(i+2) DO 25 k= k1,k2 TV3(k)= xt 25 continue CALL STATW( STAT2,TV,MAP, TV2,TV3,meff) TV1(i)= STAT2(5) 27 continue WRITE ( iou,7220) SUMW(j), sumo, ( TV1(k), k=1,7) 29 continue C WRITE ( iou,7349) WRITE ( iou,7346) C C 73 CONTINUE CALL TRACK ('SENSIT ') RETURN END C C*************************************** SUBROUTINE SEQDIG( ND, isum, A, B, nr) C*********************************************************************** C * c SEQDIG - compute relative error and significant digits of precisi* C * C ND - Out.Ary Number of Significant Equal Digits in A.eq.B * C isum - Result Total number of Equal digits. * C A - In.Ary Reference values for comparison. * C B - In.Ary New values of unknown precision. * C nr - Input number of results in ND * C*********************************************************************** C cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) C parameter( maxsd= 16 ) c/ parameter( maxsd= 30 ) DIMENSION ND(nr), A(nr), B(nr) C ISIGDG(reler)= INT( ABS( LOG10( ABS( reler))) + 0.500d0 ) CALL TRACE ('SEQDIG ') c c Try to determine floating-point precision used: Max Sig Digits c maxs= maxsd one= 1.00d0 sd= 1073741824.00d0 sum= sd + one IF( sum .EQ. sd ) maxs= 8 c isum= 0 DO 1 k= 1,nr se= SIGN( one, A(k)) * SIGN( one, B(k)) IF( se .LT. 0.0) THEN ND(k)= 0 ELSE c c compute relative error and digits of precision in B. c re= RELERR( A(k), B(k)) IF((re.GT. 0.0d0 ) .AND. (re.LT. 1.0d0)) THEN ND(k)= ISIGDG(re) ELSEIF( re .EQ. 0.0d0 ) THEN ND(k)= maxs ELSEIF( re .GE. 1.0d0 ) THEN ND(k)= 0 ENDIF IF( ND(k).GT. maxs ) ND(k)= maxs ENDIF isum= isum + ND(k) 1 CONTINUE C CALL TRACK ('SEQDIG ') RETURN END C C C*********************************************** SUBROUTINE SIGNEL( V, SCALE,BIAS, n) C*********************************************** C C SIGNEL GENERATES VERY FRIENDLY FLOATING-POINT NUMBERS NEAR 1.0 C WHEN SCALE= 1.0 AND BIAS= 0. C C V - result array, floating-point test data C SCALE - input scalar, scales magnitude of results C BIAS - input scalar, offsets magnitude of results C n - input integer, number of results in V. C C*********************************************** cANSI DOUBLE PRECISION V, SCALE, BIAS cIBM REAL*8 V, SCALE, BIAS c c Use the following Double Precision declaration to improve Real*4 tests. c Use the following Real*16 declaration to improve Real*8 tests. c DOUBLE PRECISION SCALED,BIASED,FUZZ,BUZZ,FIZZ,ONE cIBM REAL*16 SCALED,BIASED,FUZZ,BUZZ,FIZZ,ONE DIMENSION V(n) C CALL TRACE ('SIGNEL ') C SCALED= SCALE BIASED= BIAS C SCALED= 10.00d0 SCALED= 1.00d0/SCALED BIASED= 0.00d0 C C FUZZ= 1.234500d-9 FUZZ= 1.234500d-3 BUZZ= 1.000d0 + FUZZ FIZZ= 1.100d0 * FUZZ ONE= 1.000d0 C DO 1 k= 1,n BUZZ= (ONE - FUZZ)*BUZZ +FUZZ FUZZ= -FUZZ c V(k)=((BUZZ- FIZZ) -BIASED)*SCALED V(k)= (BUZZ- FIZZ)*SCALED 1 CONTINUE C CALL TRACK ('SIGNEL ') RETURN END C C C*********************************************************************** SUBROUTINE SIMD( HM, iou,RATES,WG,FR,m, MAP,TV1,TV2,TV3,n) C*********************************************************************** C * C SIMD - Sensitivity Of Harmonic Mean Rate(Mflops) SISD/SIMD Model* C * C HM - result array, Harmonic Mean Rates(k)= f( FR(k)) * C iou - input scalar, i/o unit number * C RATES - input array , execution rates (Mflops) * C WG - input array , weights paired with RATES * C FR - input array , fractions of flops executed SIMD * C m - input scalar, number of fractions * C * C MAP,TV,TV1,TV2,TV3 - output temporary arrays * C n - input scalar, number of rates, etc. * C * C*********************************************************************** C C cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) C c SENSITIVITY OF NET MFLOPS RATE TO USE OF OPTIMAL FORTRAN CODE(SISD/SIMD MODEL) c Out DIMENSION HM(m) c In DIMENSION FR(m), RATES(n), WG(n) c Temp DIMENSION MAP(n), TV1(n), TV2(n), TV3(n), STAT2(20) C CALL TRACE ('SIMD ') C Compress valid data sets RATES, mapping on MAP. meff= 0 neff= 0 bl= 1.0d-5 bu= 1.0d+5 CALL VALID( TV1,MAP,neff, bl, RATES, bu, n) DO 1 k= 1,neff TV3(k)= WG( MAP(k)) 1 continue C Compress valid data sets WG, mapping on MAP. CALL VALID( TV3,MAP,meff, bl, TV3, bu, neff) DO 3 k= 1,meff TV2(k)= TV1( MAP(k)) 3 continue C Sort RATES,WT into descending order. CALL STATW( STAT2,TV1,MAP, TV2, TV3, meff) med= meff + 1 - INT(STAT2(8)) lh= meff + 1 - med DO 5 k= 1,meff TV2(k)= TV3( MAP(k)) 5 continue C Estimate vector rate= HMean of top LFK quartile. nq= meff/4 CALL STATW( STAT2,TV3,MAP, TV1,TV2,nq) vmf= STAT2(5) C Estimate scalar rate= HMean of lowest two LFK quartiles. CALL STATW( STAT2,TV3,MAP, TV1(med),TV2(med),lh) smf= STAT2(5) fuzz= 1.0d-9 g= 1.0d0 - smf/( vmf + fuzz) HM(1)= smf DO 7 k= 2,m HM(k)= smf/( 1.0d0 - FR(k)*g + fuzz) 7 continue C IF( iou .GT. 0) THEN C WRITE ( iou,7001) WRITE ( iou,7001) WRITE ( iou,7001) WRITE ( iou,7101) WRITE ( iou,7102) ( HM(k), k= 1,9) WRITE ( iou,7102) ( FR(k), k= 1,9) WRITE ( iou,7103) WRITE ( iou,7001) 7001 FORMAT(/) 7101 FORMAT(' SENSITIVITY OF NET MFLOPS RATE TO USE OF OPTIMAL FORTRAN 1CODE(SISD/SIMD MODEL)' ) 7102 FORMAT(/,1X,5F7.2,4F8.2) 7103 FORMAT(3x,52H Fraction Of Operations Run At Optimal Fortran Rates) C ENDIF C CALL TRACK ('SIMD ') RETURN C END C C C*********************************************** SUBROUTINE SIZES(i) C*********************************************** cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) C C SIZES test and set the loop controls before each kernel test C C i := kernel number C C mk := number of kernels to test C Nruns := number of timed runs of complete test. C tclock:= cpu clock resolution or minimum time in seconds. C Loop := multiple pass control to execute kernel long enough to time. C n := DO loop control for each kernel. C ****************************************************************** C C C/ PARAMETER( l1= 1001, l2= 101, l1d= 2*1001 ) C/ PARAMETER( l13= 64, l13h= l13/2, l213= l13+l13h, l813= 8*l13 ) C/ PARAMETER( l14=2048, l16= 75, l416= 4*l16 , l21= 25 ) C C/ PARAMETER( l1= 27, l2= 15, l1d= 2*1001 ) C/ PARAMETER( l13= 8, l13h= 8/2, l213= 8+4, l813= 8*8 ) C/ PARAMETER( l14= 16, l16= 15, l416= 4*15 , l21= 15) C C/ PARAMETER( l1= 1001, l2= 101, l1d= 2*1001 ) C/ PARAMETER( l13= 64, l13h= 64/2, l213= 64+32, l813= 8*64 ) C/ PARAMETER( l14= 2048, l16= 75, l416= 4*75 , l21= 25) C C/ PARAMETER( kn= 47, kn2= 95, np= 3, ls= 3*47, krs= 24) C C/ PARAMETER( NNI= 2*l1 +2*l213 +l416 ) C/ PARAMETER( NN1= 16*l1 +13*l2 +2*l416 + l14 ) C/ PARAMETER( NN2= 4*l813 + 3*l21*l2 +121*l2 +3*l13*l13 ) C/ PARAMETER( Nl1= 19*l1, Nl2= 131*l2 +3*l21*l2 ) C/ PARAMETER( Nl13= 3*l13*l13 +34*l13 +32) C C/ PARAMETER( nk= 47, nl= 3, nr= 8 ) C COMMON /ALPHA/ mk,ik,im,ml,il,Mruns,Nruns,jr,iovec,NPFS(8,3,47) COMMON /TAU/ tclock, tsecov, testov, cumtim(4) COMMON /BETA / tic, TIMES(8,3,47), SEE(5,3,8,3), 1 TERRS(8,3,47), CSUMS(8,3,47), 2 FOPN(8,3,47), DOS(8,3,47) C C COMMON /SPACES/ ion,j5,k2,k3,MULTI,laps,Loop,m,kr,LP,n13h,ibuf,nx, 1 L,npass,nfail,n,n1,n2,n13,n213,n813,n14,n16,n416,n21,nt1,nt2, 2 last,idebug,mpy,Loops2,mucho,mpylim, intbuf(16) C COMMON /SPACER/ A11,A12,A13,A21,A22,A23,A31,A32,A33, 2 AR,BR,C0,CR,DI,DK, 3 DM22,DM23,DM24,DM25,DM26,DM27,DM28,DN,E3,E6,EXPMAX,FLX, 4 Q,QA,R,RI,S,SCALE,SIG,STB5,T,XNC,XNEI,XNM C COMMON /SPACE0/ TIME(47), CSUM(47), WW(47), WT(47), ticks, 1 FR(9), TERR1(47), SUMW(7), START, 2 SKALE(47), BIAS(47), WS(95), TOTAL(47), FLOPN(47), 3 IQ(7), NPF, NPFS1(47) C COMMON /SPACEI/ WTP(3), MUL(3), ISPAN(47,3), IPASS(47,3) C C ****************************************************************** C CALL TRACE ('SIZES ') C nif= 0 c Set mk .LE. 47 number of kernels to test. mk= 24 im= 1 ml= 3 c Set Nruns .LT. 8 number of timed runs of KERNEL test c Set Nruns= 1 to REDUCE RUN TIME for debug runs. Nruns= 1 c Set Nruns= 7 for Standard BENCHMARK Test. Maximum. Nruns= 7 IF( Nruns.GT. 7) Nruns= 7 c c Set Mruns= 7 for Standard BENCHMARK Test. Mruns= Nruns c C**************************************************************************** c OPTIONAL LONG ENDURANCE TEST FOR NEW HARDWARE ACCEPTANCE TESTING. c OPTIONAL Set Mruns= for Hardware ENDURANCE TRIAL c c Mruns= Nruns * ( Desired Trial Time(sec) / totjob Time(sec)) c where totjob-time is LFK Standard benchmark c test Job-time printed at end of output file. c c e.g. 12 Hour run on CRAY-XMP : laps = 43200./ 17.5 = 2468 c 12 Hour run on VaxS3500 : laps = 43200./478.4 = 90 c c laps= 1 C**************************************************************************** C Mruns= Nruns * laps IF( Mruns.LT.Nruns .OR. Mruns.GT.500000 ) Mruns= Nruns C IF( i.EQ.-1) GO TO 73 C C**************************************************************************** C Domain tests follow to detect overstoring of controls for array opns. C**************************************************************************** C nif= 1 iup= 999000 IF( iup.LT.65000 ) iup= 65000 IF( i.LT.1 .OR. (i-1).GT. 24) GO TO 911 IF( n.LT.0 .OR. n.GT. 1001) GO TO 911 IF(Loop.LT.0 .OR. Loop.GT.iup) GO TO 911 C nif= 2 IF( il.LT.1 .OR. il.GT.3 ) GO TO 911 n= ISPAN(i,il) Loop = IPASS(i,il) * MUL(il) Loop = MULTI * Loop LP = Loop c c c c MULTI= 10 c ------ ------ ------ ------- ------- ------------ c kernel L:Loop n:loop flops*1 flops*n flops*n*Loop c ------ ------ ------ ------- ------- ------------ c il= 1 1 70 1001 5 5005 350350 c 2 670 97 4 388 259960 c 3 90 1001 2 2002 180180 c 4 140 600 2 1200 168000 c 5 100 1000 2 2000 200000 c 6 30 1984 2 3968 119040 c 7 40 995 16 15920 636800 c 8 100 198 36 7128 712800 c 9 360 101 17 1717 618120 c 10 340 101 9 909 309060 c 11 110 1000 1 1000 110000 c 12 120 1000 1 1000 120000 c 13 360 64 7 448 161280 c 14 20 1001 11 11011 220220 c 15 10 500 33 16500 165000 c 16 250 53 10 530 132500 c 17 350 101 9 909 318150 c 18 20 495 44 21780 435600 c 19 390 101 6 606 236340 c 20 10 1000 26 26000 260000 c 21 10 63125 2 126250 1262500 c 22 110 101 17 1717 188870 c 23 80 495 11 5445 435600 c 24 50 1000 1 1000 50000 c il= 2 1 800 101 5 505 404000 c 2 800 97 4 388 310400 c 3 1060 101 2 202 214120 c 4 1400 60 2 120 168000 c 5 1100 100 2 200 220000 c 6 140 480 2 960 134400 c 7 440 101 16 1616 711040 c 8 120 198 36 7128 855360 c 9 420 101 17 1717 721140 c 10 380 101 9 909 345420 c 11 1280 100 1 100 128000 c 12 1360 100 1 100 136000 c 13 820 32 7 224 183680 c 14 200 101 11 1111 222200 c 15 20 500 33 16500 330000 c 16 540 28 10 280 151200 c 17 400 101 9 909 363600 c 18 20 495 44 21780 435600 c 19 460 101 6 606 278760 c 20 160 100 26 2600 416000 c 21 20 31250 2 62500 1250000 c 22 140 101 17 1717 240380 c 23 100 495 11 5445 544500 c 24 620 100 1 100 62000 c il= 3 1 2240 27 5 135 302400 c 2 3680 11 4 44 161920 c 3 2960 27 2 54 159840 c 4 3040 15 2 30 91200 c 5 3200 26 2 52 166400 c 6 1680 24 2 48 80640 c 7 1600 21 16 336 537600 c 8 720 26 36 936 673920 c 9 2080 15 17 255 530400 c 10 2000 15 9 135 270000 c 11 3680 26 1 26 95680 c 12 3840 26 1 26 99840 c 13 2480 8 7 56 138880 c 14 640 27 11 297 190080 c 15 80 70 33 2310 184800 c 16 1120 11 10 110 123200 c 17 2080 15 9 135 280800 c 18 160 65 44 2860 457600 c 19 2240 15 6 90 201600 c 20 560 26 26 676 378560 c 21 80 12500 2 25000 2000000 c 22 640 15 17 255 163200 c 23 560 65 11 715 400400 c 24 1840 26 1 26 47840 c Computers with high resolution clocks tic= O(microsec.) should use Loop= 1 C to show un-initialized as well as encached execution rates. C C Loop= 1 C IF( Loop.LT. 1) Loop= 1 LP = Loop L = 1 mpy = 1 nif = 3 IF( n.LT.0 .OR. n.GT. 1001) GO TO 911 IF(Loop.LT.0 .OR. Loop.GT.iup) GO TO 911 n1 = 1001 n2 = 101 n13 = 64 n13h= 32 n213= 96 n813= 512 n14 = 2048 n16 = 75 n416= 300 n21 = 25 C nt1= 16*1001 +13*101 +2*300 + 2048 nt2= 4*512 + 3*25*101 +121*101 +3*64*64 C 73 CONTINUE CALL TRACK ('SIZES ') RETURN C C 911 io= ABS( ion) IF( io.LE.0 .OR. io.GT.10 ) io=6 WRITE( io,913) i, nif, n, Loop, il 913 FORMAT(1H1,///,37H FATAL OVERSTORE/ DATA LOSS. TEST= ,6I6) CALL WHERE(0) C END C*********************************************** SUBROUTINE SORDID( I,W, V,n,KIND) C*********************************************** C QUICK AND DIRTY PORTABLE SORT. C C I - RESULT INDEX-LIST. MAPS V TO SORTED W. C W - RESULT ARRAY, SORTED V. C C V - INPUT ARRAY SORTED IN PLACE. C n - INPUT NUMBER OF ELEMENTS IN V C KIND - SORT ORDER: = 1 ASCENDING MAGNITUDE C = 2 DESCENDING MAGNITUDE C C*********************************************** cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) C DIMENSION I(n), W(n), V(n) C CALL TRACE ('SORDID ') C IF( n.LE.0 ) GO TO 73 DO 1 k= 1,n W(k)= V(k) 1 I(k)= k C IF( KIND.EQ.1) THEN C DO 3 j= 1,n-1 m= j DO 2 k= j+1,n IF( W(k).LT.W(m)) m= k 2 CONTINUE X= W(j) k= I(j) W(j)= W(m) I(j)= I(m) W(m)= X I(m)= k 3 CONTINUE C C ELSE C DO 6 j= 1,n-1 m= j DO 5 k= j+1,n IF( W(k).GT.W(m)) m= k 5 CONTINUE X= W(j) k= I(j) W(j)= W(m) I(j)= I(m) W(m)= X I(m)= k 6 CONTINUE ENDIF C IF( n.GT.0 ) THEN CALL TRAP( I, 8H SORDID , 1, n,n) ENDIF C 73 CONTINUE CALL TRACK ('SORDID ') RETURN END C C*********************************************** SUBROUTINE SPACE C*********************************************** C C SPACE sets memory pointers for array variables. optional. C C Subroutine Space dynamically allocates physical memory space C for the array variables in KERNEL by setting pointer values. C The POINTER declaration has been defined in the IBM PL1 language C and defined as a Fortran extension in Livermore and CRAY compilers. C C In general, large FORTRAN simulation programs use a memory C manager to dynamically allocate arrays to conserve high speed C physical memory and thus avoid slow disk references (page faults). C C It is sufficient for our purposes to trivially set the values C of pointers to the location of static arrays used in common. C The efficiency of pointered (indirect) computation should be measured C if available. C C*********************************************** cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) C C C/ PARAMETER( l1= 1001, l2= 101, l1d= 2*1001 ) C/ PARAMETER( l13= 64, l13h= 64/2, l213= 64+32, l813= 8*64 ) C/ PARAMETER( l14= 2048, l16= 75, l416= 4*75 , l21= 25) C INTEGER E,F,ZONE COMMON /ISPACE/ E(96), F(96), 1 IX(1001), IR(1001), ZONE(300) C COMMON /SPACE1/ U(1001), V(1001), W(1001), 1 X(1001), Y(1001), Z(1001), G(1001), 2 DU1(101), DU2(101), DU3(101), GRD(1001), DEX(1001), 3 XI(1001), EX(1001), EX1(1001), DEX1(1001), 4 VX(1001), XX(1001), RX(1001), RH(2048), 5 VSP(101), VSTP(101), VXNE(101), VXND(101), 6 VE3(101), VLR(101), VLIN(101), B5(101), 7 PLAN(300), D(300), SA(101), SB(101) C COMMON /SPACE2/ P(4,512), PX(25,101), CX(25,101), 1 VY(101,25), VH(101,7), VF(101,7), VG(101,7), VS(101,7), 2 ZA(101,7) , ZP(101,7), ZQ(101,7), ZR(101,7), ZM(101,7), 3 ZB(101,7) , ZU(101,7), ZV(101,7), ZZ(101,7), 4 B(64,64), C(64,64), H(64,64), 5 U1(5,101,2), U2(5,101,2), U3(5,101,2) C C ****************************************************************** C C// COMMON /POINT/ ME,MF,MU,MV,MW,MX,MY,MZ,MG,MDU1,MDU2,MDU3,MGRD, C// 1 MDEX,MIX,MXI,MEX,MEX1,MDEX1,MVX,MXX,MIR,MRX,MRH,MVSP,MVSTP, C// 2 MVXNE,MVXND,MVE3,MVLR,MVLIN,MB5,MPLAN,MZONE,MD,MSA,MSB, C// 3 MP,MPX,MCX,MVY,MVH,MVF,MVG,MVS,MZA,MZP,MZQ,MZR,MZM,MZB,MZU, C// 4 MZV,MZZ,MB,MC,MH,MU1,MU2,MU3 C//C C//CLLL. LOC(X) =.LOC.X C//C CALL TRACE ('SPACE ') C// ME = LOC( E ) C// MF = LOC( F ) C// MU = LOC( U ) C// MV = LOC( V ) C// MW = LOC( W ) C// MX = LOC( X ) C// MY = LOC( Y ) C// MZ = LOC( Z ) C// MG = LOC( G ) C// MDU1 = LOC( DU1 ) C// MDU2 = LOC( DU2 ) C// MDU3 = LOC( DU3 ) C// MGRD = LOC( GRD ) C// MDEX = LOC( DEX ) C// MIX = LOC( IX ) C// MXI = LOC( XI ) C// MEX = LOC( EX ) C// MEX1 = LOC( EX1 ) C// MDEX1 = LOC( DEX1 ) C// MVX = LOC( VX ) C// MXX = LOC( XX ) C// MIR = LOC( IR ) C// MRX = LOC( RX ) C// MRH = LOC( RH ) C// MVSP = LOC( VSP ) C// MVSTP = LOC( VSTP ) C// MVXNE = LOC( VXNE ) C// MVXND = LOC( VXND ) C// MVE3 = LOC( VE3 ) C// MVLR = LOC( VLR ) C// MVLIN = LOC( VLIN ) C// MB5 = LOC( B5 ) C// MPLAN = LOC( PLAN ) C// MZONE = LOC( ZONE ) C// MD = LOC( D ) C// MSA = LOC( SA ) C// MSB = LOC( SB ) C// MP = LOC( P ) C// MPX = LOC( PX ) C// MCX = LOC( CX ) C// MVY = LOC( VY ) C// MVH = LOC( VH ) C// MVF = LOC( VF ) C// MVG = LOC( VG ) C// MVS = LOC( VS ) C// MZA = LOC( ZA ) C// MZP = LOC( ZP ) C// MZQ = LOC( ZQ ) C// MZR = LOC( ZR ) C// MZM = LOC( ZM ) C// MZB = LOC( ZB ) C// MZU = LOC( ZU ) C// MZV = LOC( ZV ) C// MZZ = LOC( ZZ ) C// MB = LOC( B ) C// MC = LOC( C ) C// MH = LOC( H ) C// MU1 = LOC( U1 ) C// MU2 = LOC( U2 ) C// MU3 = LOC( U3 ) C CALL TRACK ('SPACE ') RETURN END C C*********************************************************************** SUBROUTINE SPEDUP( iou, NAME, RATE ) C*********************************************************************** C * C SPEDUP - Computes Speed-ups: A circumspect method of comparison.* C Computers are ranked by their Geometric Mean Rates. * C * C iou - input scalar, i/o unit number * C NAME - input array , system name * C RATE - input array , execution rates (Mflops) * C * C*********************************************************************** C C cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) C parameter( nsys= 5, ns= nsys+1, nd= 11, nt= 4 ) CHARACTER NAME*8, NAMES*8, ijk*8 DIMENSION RATE(nt), NAME(nt), RATIO(nd) CHARACTER*8 IT(nt) COMMON /TAGS/ NAMES(nd,nt) COMMON /RATS/ RATED(nd,nt) C CALL TRACE ('SPEDUP ') C Rank computer NAME by its Geometric Mean. DO 2 k= 1,nsys IF( RATE(2) .GT. RATED(k,2)) GO TO 4 2 continue 4 insert= k C Pushdown Tables to allow insertion. DO 8 i= nd, insert+1, -1 DO 6 j= 1,nt NAMES(i,j)= NAMES(i-1,j) RATED(i,j)= RATED(i-1,j) 6 continue 8 continue C Insert new computer NAME DO 10 j= 1,nt NAMES(insert,j)= NAME(j) RATED(insert,j)= RATE(j) 10 continue C Print Table of Speed-ups of Mean Rates. CALL PAGE( iou) IT(1)= 'AM=' IT(2)= 'GM=' IT(3)= 'HM=' ijk = '--------' fuzz = 1.0d-9 WRITE( iou,111) WRITE( iou,104) 104 FORMAT(26X,'TABLE OF SPEED-UP RATIOS OF MEAN RATES (72 Samples)') WRITE( iou,105) 105 FORMAT(/,26X,'Arithmetic, Geometric, Harmonic Means (AM,GM,HM)') WRITE( iou,106) 106 FORMAT(26X,'The Geometric Mean is the least biased statistic.',/) WRITE( iou,109) ( ijk, m= 1,ns) 109 FORMAT(1X,'-------- ---- ------ ',11(1X,A )) WRITE( iou,110) ( NAMES(m,2), m= 1,ns) 110 FORMAT(1X,'SYSTEM MEAN MFLOPS',2X,11(1X,A )) WRITE( iou,109) ( ijk, m= 1,ns) C DO 40 i= 1,ns WRITE( iou,111) 111 FORMAT(/) C DO 26 j= 1,nt-1 C DO 22 m= 1,ns RATIO(m)= RATED(i,j) / (RATED(m,j) + fuzz) 22 continue C WRITE( iou,112) NAMES(i,j), IT(j), RATED(i,j), (RATIO(m), m=1,ns) 112 FORMAT(1X,A ,2X,A3,F9.3,2H :,11F9.3) 26 continue C WRITE( iou,114) RATED(i,4) 114 FORMAT(11X,3HSD=,F9.3) 40 continue C CALL TRACK ('SPEDUP ') RETURN END C*********************************************** SUBROUTINE STATS( STAT, X,n) C*********************************************** C C UNWEIGHTED STATISTICS: MEAN, STADEV, MIN, MAX, HARMONIC MEAN. C C STAT(1)= THE MEAN OF X. C STAT(2)= THE STANDARD DEVIATION OF THE MEAN OF X. C STAT(3)= THE MINIMUM OF X. C STAT(4)= THE MAXIMUM OF X. C STAT(5)= THE HARMONIC MEAN C X IS THE ARRAY OF INPUT VALUES. C n IS THE NUMBER OF INPUT VALUES IN X. C C*********************************************** cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) C DIMENSION X(n), STAT(20) cLLL. OPTIMIZE LEVEL G C CALL TRACE ('STATS ') C DO 10 k= 1,9 10 STAT(k)= 0.0 C IF(n.LE.0) GO TO 73 C CALCULATE MEAN OF X. S= 0.0 DO 1 k= 1,n 1 S= S + X(k) A= S/n STAT(1)= A C CALCULATE STANDARD DEVIATION OF X. D= 0.0 DO 2 k= 1,n 2 D= D + (X(k)-A)**2 D= D/n STAT(2)= SQRT(D) C CALCULATE MINIMUM OF X. U= X(1) DO 3 k= 2,n 3 U= MIN(U,X(k)) STAT(3)= U C CALCULATE MAXIMUM OF X. V= X(1) DO 4 k= 2,n 4 V= MAX(V,X(k)) STAT(4)= V C CALCULATE HARMONIC MEAN OF X. H= 0.0 DO 5 k= 1,n IF( X(k).NE.0.0) H= H + 1.0/X(k) 5 CONTINUE IF( H.NE.0.0) H= REAL(n)/H STAT(5)= H C 73 CONTINUE CALL TRACK ('STATS ') RETURN END C*********************************************** SUBROUTINE STATW( STAT,OX,IX, X,W,n) C*********************************************** C C WEIGHTED STATISTICS: MEAN, STADEV, MIN, MAX, HARMONIC MEAN, MEDIAN. C C STAT( 1)= THE MEAN OF X. C STAT( 2)= THE STANDARD DEVIATION OF THE MEAN OF X. C STAT( 3)= THE MINIMUM OF X. C STAT( 4)= THE MAXIMUM OF X. C STAT( 5)= THE HARMONIC MEAN C STAT( 6)= THE TOTAL WEIGHT. C STAT( 7)= THE MEDIAN. C STAT( 8)= THE MEDIAN INDEX, ASCENDING. C STAT( 9)= THE ROBUST MEDIAN ABSOLUTE DEVIATION. C STAT(10)= THE GEOMETRIC MEAN C STAT(11)= THE MOMENTAL SKEWNESS C STAT(12)= THE KURTOSIS C STAT(13)= THE LOWER QUARTILE BOUND Q1/Q2 VALUE C STAT(14)= THE UPPER QUARTILE BOUND Q3/Q4 VALUE C STAT(15)= THE DEVIATION OF THE GEOMETRIC MEAN OF X C C OX IS THE ARRAY OF ORDERED (DECENDING) Xs. C IX IS THE ARRAY OF INDEX LIST MAPS X TO OX. C C X IS THE ARRAY OF INPUT VALUES. C W IS THE ARRAY OF INPUT WEIGHTS. C n IS THE NUMBER OF INPUT VALUES IN X. C C*********************************************** cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) C DIMENSION STAT(20), OX(n), IX(n), X(n), W(n) cLLL. OPTIMIZE LEVEL G C CALL TRACE ('STATW ') stin09= 0.00d0 stin13= 0.00d0 stin14= 0.00d0 C DO 50 k= 1,15 50 STAT(k)= 0.0d0 C IF( n.LE.0 ) GO TO 73 C IF( n.EQ.1 ) THEN STAT( 1)= X(1) STAT( 3)= X(1) STAT( 4)= X(1) STAT( 5)= X(1) STAT( 6)= W(1) STAT( 7)= X(1) STAT( 8)= 1.0d0 STAT(10)= X(1) GO TO 73 ENDIF C C C CALCULATE MEAN OF X. A= 0.0d0 S= 0.0d0 T= 0.0d0 C DO 1 k= 1,n S= S + W(k)*X(k) 1 T= T + W(k) IF( T.NE.0.0d0) A= S/T STAT(1)= A C CALCULATE STANDARD DEVIATION OF X. D= 0.0d0 E= 0.0d0 F= 0.0d0 Q= 0.0d0 U= 0.0d0 C DO 2 k= 1,n B= W(k) *( X(k) -A)**2 D= D + B E= E + B*( X(k) -A) 2 F= F + B*( X(k) -A)**2 IF( T.NE.0.0d0) Q= 1.0d0/T D= D*Q E= E*Q F= F*Q IF( D.GE.0.0d0) U= SQRT(D) STAT(2)= U C CALCULATE MINIMUM OF X. U= X(1) DO 3 k= 2,n 3 U= MIN(U,X(k)) STAT(3)= U C CALCULATE MAXIMUM OF X. V= X(1) DO 4 k= 2,n 4 V= MAX(V,X(k)) STAT(4)= V C CALCULATE HARMONIC MEAN OF X. H= 0.0d0 DO 5 k= 1,n IF( X(k).NE.0.0d0) H= H + W(k)/X(k) 5 CONTINUE IF( H.NE.0.0d0) H= T/H STAT(5)= H STAT(6)= T C CALCULATE WEIGHTED MEDIAN CALL SORDID( IX, OX, X, n, 1) C ew= 0.0d0 DO 7 k= 2,n IF( W(1) .NE. W(k)) GO TO 75 7 continue ew= 1.0d0 75 continue C qt= 0.500d0 CALL TILE( STAT( 7), STAT(8), OX,IX,W,ew,T, qt,n) C qt= 0.250d0 CALL TILE( STAT(13), stin13, OX,IX,W,ew,T, qt,n) C qt= 0.750d0 CALL TILE( STAT(14), stin14, OX,IX,W,ew,T, qt,n) C C C CALCULATE ROBUST MEDIAN ABSOLUTE DEVIATION (MAD) DO 90 k= 1,n 90 OX(k)= ABS( X(k) - STAT(7)) C CALL SORDID( IX, OX, OX, n, 1) C qt= 0.700d0 CALL TILE( STAT( 9), stin09, OX,IX,W,ew,T, qt,n) C C CALCULATE GEOMETRIC MEAN R= 0.0d0 DO 10 k= 1,n IF( X(k).LE. 0.0d0) GO TO 10 R= R + W(k) *LOG10( X(k)) 10 CONTINUE U= R*Q G= 10.0d0 IF( U.LT. 0.0d0) G= 0.1D0 POWTEN= 50.0d0 IF( ABS(U) .GT. POWTEN) U= SIGN( POWTEN, U) STAT(10)= G** ABS(U) C C CALCULATE MOMENTAL SKEWNESS G= 0.0d0 DXD= D*D IF( DXD.NE.0.0d0) G= 1.0d0/(DXD) STAT(11)= 0.50d0*E*G*STAT(2) C C CALCULATE KURTOSIS STAT(12)= 0.50d0*( F*G -3.0d0) C C CALCULATE DEVIATION OF GEOMETRIC MEAN D= 0.0d0 Q= 0.0d0 U= 0.0d0 GM= STAT(10) C DO 15 k= 1,n B= W(k) *( X(k) -GM)**2 15 D= D + B IF( T.NE.0.0d0) Q= 1.0d0/T D= D*Q IF( D.GE.0.0d0) U= SQRT(D) STAT(15)= U C C CALCULATE DESCENDING ORDERED X. CALL SORDID( IX, OX, X, n, 2) C 73 CONTINUE CALL TRACK ('STATW ') RETURN END C C*********************************************** FUNCTION SUMO( V,n) C*********************************************** C C CHECK-SUM WITH ORDINAL DEPENDENCY. C C V - input array, floating-point numbers C n - input integer, number of elements in V. C C*********************************************** cANSI DOUBLE PRECISION SUMO, V cIBM REAL*8 SUMO, V c c Use the following Double Precision declaration to improve Real*4 tests. c Use the following Real*16 declaration to improve Real*8 tests. c DOUBLE PRECISION S cIBM REAL*16 S C DIMENSION V(n) C CALL TRACE ('SUMO ') S= 0.00d0 C DO 1 k= 1,n 1 S= S + REAL(k)*V(k) SUMO = S CALL TRACK ('SUMO ') RETURN END C C*********************************************** SUBROUTINE SUPPLY(i) C*********************************************** C C SUPPLY initializes common blocks containing type real arrays. C C i := kernel number C C**************************************************************************** cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) DOUBLE PRECISION DS, DW REDUNDNT C C/ PARAMETER( l1= 1001, l2= 101, l1d= 2*1001 ) C/ PARAMETER( l13= 64, l13h= 64/2, l213= 64+32, l813= 8*64 ) C/ PARAMETER( l14= 2048, l16= 75, l416= 4*75 , l21= 25) C C/ PARAMETER( kn= 47, kn2= 95, np= 3, ls= 3*47, krs= 24) C/C C/C/ PARAMETER( NN0= 39 ) C/C/ PARAMETER( NNI= 2*l1 +2*l213 +l416 ) C/C/ PARAMETER( NN1= 16*l1 +13*l2 +2*l416 + l14 ) C/C/ PARAMETER( NN2= 4*512 + 3*25*101 +121*101 +3*64*64 ) C COMMON /ALPHA/ mk,ik,im,ml,il,Mruns,Nruns,jr,iovec,NPFS(8,3,47) COMMON /SPACES/ ion,j5,k2,k3,MULTI,laps,Loop,m,kr,LP,n13h,ibuf,nx, 1 L,npass,nfail,n,n1,n2,n13,n213,n813,n14,n16,n416,n21,nt1,nt2, 2 last,idebug,mpy,Loops2,mucho,mpylim, intbuf(16) C COMMON /SPACE0/ TIME(47), CSUM(47), WW(47), WT(47), ticks, 1 FR(9), TERR1(47), SUMW(7), START, 2 SKALE(47), BIAS(47), WS(95), TOTAL(47), FLOPN(47), 3 IQ(7), NPF, NPFS1(47) COMMON /CKSUMS/ cksumu,ckoldu, cksump,ckoldp, cksuma,ckolda C C/ COMMON /SPACE1/ U(NN1) C/ COMMON /SPACE2/ P(NN2) C/ COMMON /SPACER/ A11(NN0) C/C COMMON /SPACE1/ U(19977) COMMON /SPACE2/ P(34132) COMMON /SPACER/ A11(39) C/ C C*********************************************************************** C Method 1: Least space and most cpu time (D.P. SIGNEL arith) C*********************************************************************** C Csmall CALL TRACE ('SUPPLY ') Csmall IP1= i+1 Csmall nt0= 39 CsmallC Csmall CALL SIGNEL( U, SKALE(IP1), BIAS(IP1), nt1) Csmall CALL SIGNEL( P, SKALE(IP1), BIAS(IP1), nt2) Csmall CALL SIGNEL(A11, SKALE(IP1), BIAS(IP1), nt0) Csmall CALL TRACK ('SUPPLY ') Csmall RETURN C C*********************************************************************** C Method 2: Double space and least cpu time C*********************************************************************** C COMMON /BASE1/ BUFU(19977) COMMON /BASE2/ BUFP(34132) COMMON /BASER/ BUFA(39) DIMENSION P0(4,512) EQUIVALENCE(BUFP,P0) C C/C kleiner C/ COMMON /BASE1/ BUFU( 2136) C/ COMMON /BASE2/ BUFP( 2938) C CALL TRACE ('SUPPLY ') C IP1= i nt0= 39 C Execute SIGNEL calls only once; re-use generated data. ibuf= ibuf+1 IF( ibuf.EQ. 1) THEN CALL SIGNEL( BUFU, SKALE(IP1), BIAS(IP1), nt1) CALL SIGNEL( BUFP, SKALE(IP1), BIAS(IP1), nt2) CALL SIGNEL( BUFA, SKALE(IP1), BIAS(IP1), nt0) DS= 1.000d0 DW= 0.500d0 DO 205 j= 1,4 DO 205 k= 1,512 P0(j,k) = DS DS= DS + DW 205 CONTINUE ENDIF C C Test for Trashing Data in BUF idebug= 0 IF( idebug.EQ.1 . .OR. ibuf .EQ.1 . .OR. i .EQ.(24-1)) THEN C cksumu= SUMO( BUFU, nt1) cksump= SUMO( BUFP, nt2) cksuma= SUMO( BUFA, nt0) C IF( ibuf.EQ. 1) THEN ckoldu= cksumu ckoldp= cksump ckolda= cksuma ELSEIF( cksumu.NE.ckoldu . .OR. cksump.NE.ckoldp . .OR. cksuma.NE.ckolda ) THEN iou= ABS(ion) WRITE( iou,111) jr, il, ik WRITE( iou,112) ckoldu, ckoldp, ckolda WRITE( iou,113) cksumu, cksump, cksuma 111 FORMAT(' SUPPLY: OVERSTORED! Trial=',I2,' Pass=',I2,' Kernel=',I3) 112 FORMAT(' ckold:',3E24.15) 113 FORMAT(' cksum:',3E24.15) ENDIF ENDIF C Refill Work-Space from copies in Buffers DO 1 k= 1,nt0 1 A11(k)= BUFA(k) DO 2 k= 1,nt1 2 U(k)= BUFU(k) DO 3 k= 1,nt2 3 P(k)= BUFP(k) C CALL TRACK ('SUPPLY ') RETURN END C C*********************************************************************** SUBROUTINE TALLY( iou, mode ) C*********************************************************************** C * C TALLY computes average and minimum Cpu timings and variances.* C * C iou - i/o unit number * C * C mode - = 1 selects average run time: Preferred mode. * C = 2 selects minimum run time: Less accurate mode* C * C*********************************************************************** cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) DOUBLE PRECISION cs REDUNDNT C C/ PARAMETER( nk= 47, nl= 3, nr= 8 ) C COMMON /ALPHA/ mk,ik,im,ml,il,Mruns,Nruns,jr,iovec,NPFS(8,3,47) COMMON /BETA / tic, TIMES(8,3,47), SEE(5,3,8,3), 1 TERRS(8,3,47), CSUMS(8,3,47), 2 FOPN(8,3,47), DOS(8,3,47) C COMMON /SPACE0/ TIME(47), CSUM(47), WW(47), WT(47), ticks, 1 FR(9), TERR1(47), SUMW(7), START, 2 SKALE(47), BIAS(47), WS(95), TOTAL(47), FLOPN(47), 3 IQ(7), NPF, NPFS1(47) C DIMENSION S1(20), S2(20), S3(20), S4(20) DIMENSION T1(47), T4(47) C CALL TRACE ('TALLY ') C CALL SIZES(-1) C m= 1 IF( mode .EQ. 2 ) m= 3 CALL PAGE(iou) WRITE( iou, 99) WRITE( iou,100) C Checks valid domain for min and max of data sets DO 2 j= 1,Nruns WRITE( iou,102) j, ( SEE(k,1,j,il), k= 1,2) T1(j)= SEE(1,1,j,il) i= 0 IF( (SEE(3,2,j,il).LT. 0.01) .OR. (SEE(4,2,j,il).GT. 1.0)) i= i+1 IF( (SEE(3,3,j,il).LT. 0.01) .OR. (SEE(4,3,j,il).GT. 1.0)) i= i+1 IF( i.GT.0 ) THEN WRITE( iou,131) j, il ENDIF IF( ( j.EQ.Nruns ) .OR. ( i.GT.0 )) THEN WRITE( iou,104) j, ( SEE(k,2,j,il), k= 1,4) WRITE( iou,104) j, ( SEE(k,3,j,il), k= 1,4) ENDIF 2 continue C CALL STATS( S1, T1, Nruns) WRITE( iou,102) Nruns, ( S1(k), k= 1,4) C C C WRITE( iou,120) Nruns WRITE( iou,122) WRITE( iou,121) WRITE( iou,122) C Computes and Checks experimental timing errors DO 8 k= 1,mk npft= 0 cs= 0.0d0 C DO 4 j= 1,Nruns npft= npft + NPFS(j,il,k) cs= cs + CSUMS(j,il,k) 4 continue C CALL STATS( S2, TIMES(1,il,k), Nruns) TIME(k)= S2(m) CSUM(k)= cs TERR1(k)= 100.0d0*( S2(2)/( S2(1) + 1.0d-9)) T4(k)= TERR1(k) C C C If this clock resolution test fails, you must increase Loop (Subr. SIZES) C CALL STATS( S3, TERRS(1,il,k), Nruns) IF( S3(1) .GT. 15.0) THEN WRITE( iou,113) k ENDIF C WRITE( iou,123) k, S2(3), S2(1), S2(4), TERR1(k), S3(1), npft TERR1(k)= MAX( TERR1(k), S3(1)) CALL STATS( S1, DOS(1,il,k), Nruns) TOTAL(k)= S1(1) IF( (S1(1).LE.0.0d0) .OR. (ABS(S1(3)-S1(4)).GT.1.0d-5)) THEN WRITE( iou,131) il, k, ( S1(k4), k4= 1,4) ENDIF CALL STATS( S4, FOPN(1,il,k), Nruns) FLOPN(k)= S4(1) IF( (S4(1).LE.0.0d0) .OR. (ABS(S4(3)-S4(4)).GT.1.0d-5)) THEN WRITE( iou,131) il, k, ( S4(k4), k4= 1,4) ENDIF 8 continue C WRITE( iou,122) CALL STATS( S4, T4, mk) WRITE( *,124) WRITE( *,133) WRITE( *,125) ( S4(k), k= 1,4) WRITE( iou,124) WRITE( iou,133) WRITE( iou,125) ( S4(k), k= 1,4) C CALL TRACK ('TALLY ') RETURN C 99 FORMAT(//,29H time TEST overhead (t err): ) 100 FORMAT(/,6X,3HRUN,8X,7HAVERAGE,8X,7HSTANDEV,8X,7HMINIMUM,8X, 1 7HMAXIMUM ) 102 FORMAT(1X,5HTICK ,I3,4E15.6) 104 FORMAT(1X,5HDATA ,I3,4E15.6) 113 FORMAT(/,1X,I2,45H POOR CPU CLOCK RESOLUTION; NEED LONGER RUN. ) 120 FORMAT(//,39H THE EXPERIMENTAL TIMING ERRORS FOR ALL,I3,5H RUNS) 121 FORMAT(55H k T min T avg T max T err tick P-F) 122 FORMAT(55H -- --------- --------- --------- ----- ----- ---) 123 FORMAT(1X,I2,3E11.4,F6.2,1H%,F6.2,1H%,1X,I5) 124 FORMAT(//,50H NET CPU TIMING VARIANCE (T err); A few % is ok: ) 125 FORMAT(4X,5H Terr,4(F14.2,1H%)) 131 FORMAT(1X,32H** TALLY: ERROR INVALID DATA** ,2I6,4E14.6) 133 FORMAT(/,17X,7HAVERAGE,8X,7HSTANDEV,8X,7HMINIMUM,8X,7HMAXIMUM ) END C C*********************************************** SUBROUTINE TDIGIT( derr, nzd, s ) C*********************************************************************** C * C TDIGIT - Count Lead Digits Followed By Trailing Zeroes. * C * C derr - Result, Digital Error in percent. * C nzd - Result, Number Of Lead Digits * C s - Input , A Floated Integer * C * C*********************************************************************** cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) DOUBLE PRECISION frac, fuzz, x, y, v, z REDUNDNT C c frac(z)= (SIGN((ABS(z) - AINT(ABS(z))),z)) frac(z)= ( ABS( ABS(z) - AINT(ABS(z)))) C CALL TRACE ('TDIGIT ') C x= 0.00d0 n= 14 x= ABS(s) fuzz= 1.0d-6 derr= 100.0d0 nzd= 0 IF( x.EQ. 0.0d0) GO TO 73 C Normalize x y= LOG10(x) v= REAL( 10**( ABS( INT(y)) + 1 )) C IF( (y.GE. 0.0d0) .AND. (v.NE. 0.0d0)) THEN x= (x/v) * 10.0d0 ELSE x= x*v ENDIF C Multiply x Until Trailing Digits= Fuzz DO 1 k= 1,n IF( ((1.0d0-frac(x)).LE.fuzz) .OR. (frac(x).LE.fuzz)) GO TO 2 x= 10.0d0*x 1 continue C 2 IF( x.NE. 0.0d0) THEN derr= 50.0d0/x nzd= INT( LOG10( ABS( 9.999999990d0*x ))) ENDIF C 73 CONTINUE CALL TRACK ('TDIGIT ') RETURN END C C************************************************* INTEGER FUNCTION TEST( i ) C*********************************************************************** C * C REPEAT AND TIME THE EXECUTION OF KERNEL i * C * C i - Input integer; Test Kernel Serial Number * C TEST - Repetition Loop Counter, decremented to 0 * C * C*********************************************************************** C cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) C CLOX REAL*8 SECOND C C/ PARAMETER( l1= 1001, l2= 101, l1d= 2*1001 ) C/ PARAMETER( l13= 64, l13h= 64/2, l213= 64+32, l813= 8*64 ) C/ PARAMETER( l14= 2048, l16= 75, l416= 4*75 , l21= 25) C C/ PARAMETER( kn= 47, kn2= 95, np= 3, ls= 3*47, krs= 24) C COMMON /SPACES/ ion,j5,k2,k3,MULTI,laps,Loop,m,kr,LP,n13h,ibuf,nx, 1 L,npass,nfail,n,n1,n2,n13,n213,n813,n14,n16,n416,n21,nt1,nt2, 2 last,idebug,mpy,Loops2,mucho,mpylim, intbuf(16) C INTEGER E,F,ZONE COMMON /ISPACE/ E(96), F(96), 1 IX(1001), IR(1001), ZONE(300) C COMMON /SPACER/ A11,A12,A13,A21,A22,A23,A31,A32,A33, 2 AR,BR,C0,CR,DI,DK, 3 DM22,DM23,DM24,DM25,DM26,DM27,DM28,DN,E3,E6,EXPMAX,FLX, 4 Q,QA,R,RI,S,SCALE,SIG,STB5,T,XNC,XNEI,XNM C DIMENSION ZX(1023), XZ(1500) EQUIVALENCE ( ZX(1), Z(1)), ( XZ(1), X(1)) C COMMON /SPACE1/ U(1001), V(1001), W(1001), 1 X(1001), Y(1001), Z(1001), G(1001), 2 DU1(101), DU2(101), DU3(101), GRD(1001), DEX(1001), 3 XI(1001), EX(1001), EX1(1001), DEX1(1001), 4 VX(1001), XX(1001), RX(1001), RH(2048), 5 VSP(101), VSTP(101), VXNE(101), VXND(101), 6 VE3(101), VLR(101), VLIN(101), B5(101), 7 PLAN(300), D(300), SA(101), SB(101) C COMMON /SPACE2/ P(4,512), PX(25,101), CX(25,101), 1 VY(101,25), VH(101,7), VF(101,7), VG(101,7), VS(101,7), 2 ZA(101,7) , ZP(101,7), ZQ(101,7), ZR(101,7), ZM(101,7), 3 ZB(101,7) , ZU(101,7), ZV(101,7), ZZ(101,7), 4 B(64,64), C(64,64), H(64,64), 5 U1(5,101,2), U2(5,101,2), U3(5,101,2) C C COMMON /BASER/ A110,A120,A130,A210,A220,A230,A310,A320,A330, 2 AR0,BR0,C00,CR0,DI0,DK0, 3 DM220,DM230,DM240,DM250,DM260,DM270,DM280,DN0,E30,E60,EXPMAX0, 4 FLX0,Q0,QA0,R0,RI0,S0,SCALE0,SIG0,STB50,T0,XNC0,XNEI0,XNM0 C COMMON /BASE1/ U0(1001), V0(1001), W0(1001), 1 X0(1001), Y0(1001), Z0(1001), G0(1001), 2 DU10(101), DU20(101), DU30(101), GRD0(1001), DEX0(1001), 3 XI0(1001), EX0(1001), EX10(1001), DEX10(1001), 4 VX0(1001), XX0(1001), RX0(1001), RH0(2048), 5 VSP0(101), VSTP0(101), VXNE0(101), VXND0(101), 6 VE30(101), VLR0(101), VLIN0(101), B50(101), 7 PLAN0(300), D0(300), SA0(101), SB0(101) C COMMON /BASE2/ P0(4,512), PX0(25,101), CX0(25,101), 1 VY0(101,25), VH0(101,7), VF0(101,7), VG0(101,7), VS0(101,7), 2 ZA0(101,7) , ZP0(101,7), ZQ0(101,7), ZR0(101,7), ZM0(101,7), 3 ZB0(101,7) , ZU0(101,7), ZV0(101,7), ZZ0(101,7), 4 B0(64,64), CC0(64,64), H0(64,64), 5 U10(5,101,2), U20(5,101,2), U30(5,101,2) C COMMON /TAU/ tclock, tsecov, testov, cumtim(4) C COMMON /SPACE0/ TIME(47), CSUM(47), WW(47), WT(47), ticks, 1 FR(9), TERR1(47), SUMW(7), START, 2 SKALE(47), BIAS(47), WS(95), TOTAL(47), FLOPN(47), 3 IQ(7), NPF, NPFS1(47) C C C******************************************************************************* C Repeat execution of each Kernel(i) : DO 1 L= 1,Loop etc. C******************************************************************************* C C From the beginning in 1970 each sample kernel was executed just C once since supercomputers had high resolution, microsecond clocks. C In 1982 a repetition Loop was placed around each of the 24 LFK C kernels in order to run each kernel long enough for accurate C timing on mini-computer systems with poor cpu-clock resolution since C the majority of systems could only measure cpu-time to 0.01 seconds. C By 1990 however, several compilers' optimizers were factoring or C hoisting invariant computation outside some repetition Loops thus C distorting those Fortran samples. The effect was usually absurd C Mflop rates which had to be corrected with compiler directives. C Therefore, in April 1990 these repetition Loops were removed from C subroutine KERNEL and submerged in subroutine TEST beyond the scope C of compiler optimizations. Thus the 24 samples are now foolproof C and it will no longer be necessary to double check the machine code. C C Very accurate, convergent methods have been developed to measure the C overhead time used for subroutines SECOND and TEST in subroutines C SECOVT and TICK respectively. Thus, the LFK test may use substantially C more cpu time on systems with poor cpu-clock resolution. C The 24 C verison tests in CERNEL have also been revised to correspond with C the Fortran KERNEL. The 24 computation samples have NOT been changed. C C******************************************************************************* C cbug IF( (LP.NE.Loop).OR.(L.LT.1).OR.(L.GT.Loop)) THEN cbug CALL TRACE('TEST ') cbug CALL WHERE(0) cbug ENDIF C Repeat kernel test: Loop times. IF( L .LT. Loop ) THEN L = L + 1 TEST = L RETURN ENDIF C Repeat kernel test: Loop*Loops2 ik = i IF( mpy .LT. Loops2 ) THEN mpy = mpy + 1 nn = n C IF( i.EQ.0 ) GO TO 100 IF( i.LT.0 .OR. i.GT.24 ) THEN CALL TRACE('TEST ') CALL WHERE(0) ENDIF C RE-INITIALIZE OVER-STORED INPUTS: C GO TO( 100, 2, 100, 4, 5, 6, 100, 100, . 100, 10, 100, 100, 13, 14, 100, 16, . 17, 18, 19, 20, 21, 100, 23, 100, 100 ), i C C When MULTI.GE.100 each kernel is executed over a million times C and the time used to re-intialize overstored input variables C is negligible. Thus each kernel may be run arbitrarily many times C (MULTI >> 100) without overflow and produce verifiable checksums. C C*********************************************************************** C 2 DO 200 k= 1,nn 200 X(k)= X0(k) GO TO 100 C*************************************** C 4 m= (1001-7)/2 DO 400 k= 7,1001,m 400 XZ(k)= X0(k) GO TO 100 C*************************************** C 5 DO 500 k= 1,nn 500 X(k)= X0(k) GO TO 100 C*************************************** C 6 DO 600 k= 1,nn 600 W(k)= W0(k) GO TO 100 C*************************************** C 10 DO 1000 k= 1,nn DO 1000 j= 5,13 1000 PX(j,k)= PX0(j,k) GO TO 100 C*************************************** C 13 DO 1300 k= 1,nn P(1,k)= P0(1,k) P(2,k)= P0(2,k) P(3,k)= P0(3,k) 1300 P(4,k)= P0(4,k) c DO 1301 k= 1,64 DO 1301 j= 1,64 1301 H(j,k)= H0(j,k) GO TO 100 C*************************************** C 14 DO 1400 k= 1,nn RH(IR(k) )= RH0(IR(k) ) 1400 RH(IR(k)+1)= RH0(IR(k)+1) GO TO 100 C*************************************** C 16 k2= 0 k3= 0 GO TO 100 C*************************************** C 17 DO 1700 k= 1,nn 1700 VXNE(k)= VXNE0(k) GO TO 100 C*************************************** C 18 DO 1800 k= 2,6 DO 1800 j= 2,nn ZU(j,k)= ZU0(j,k) ZV(j,k)= ZV0(j,k) ZR(j,k)= ZR0(j,k) 1800 ZZ(j,k)= ZZ0(j,k) GO TO 100 C*************************************** C 19 STB5= STB50 GO TO 100 C*************************************** C 20 XX(1)= XX0(1) GO TO 100 C*************************************** C 21 DO 2100 k= 1,nn DO 2100 j= 1,25 2100 PX(j,k)= PX0(j,k) GO TO 100 C*************************************** C 23 DO 2300 k= 2,6 DO 2300 j= 2,nn 2300 ZA(j,k)= ZA0(j,k) C*********************************************************************** C 100 CONTINUE C L = 1 TEST = 1 RETURN ENDIF C mpy = 1 L = 1 TEST = 0 C switchback to TICK to measure testov IF( i.EQ. (-73)) RETURN C C*********************************************************************** C t= second(0) := cumulative cpu time for task in seconds. C*********************************************************************** C cumtim(1)= 0.0d0 TEMPUS= SECOND( cumtim(1)) - START C CALL TRACE ('TEST ') CPFM ikern= i CPFM call ENDPFM(ion) C$C 5 get number of page faults (optional) C$ KSTAT= LIB$STAT_TIMER(5,KPF) C$ NPF = KPF - IPF C C C Checksum results; re-initialize all inputs CALL TESTS ( i, TEMPUS ) C C C$C 5 get number of page faults (optional) VAX C$ NSTAT= LIB$STAT_TIMER(5,IPF) C CPFM IF( INIPFM( ion, 0) .NE. 0 ) THEN CPFM CALL WHERE(20) CPFM ENDIF CALL TRACK ('TEST ') C C The following pause can be used for stop-watch timing of each kernel. C You may have to increase the iteration count MULTI in Subr. VERIFY. C C/ PAUSE C mpy = 1 mpylim= Loops2 L = 1 LP = Loop ik = i+1 TEST = 0 cumtim(1)= 0.0d0 START= SECOND( cumtim(1)) RETURN C C$ DATA IPF/0/, KPF/0/ END C C*********************************************** SUBROUTINE TESTS( i, TEMPUS ) C*********************************************************************** C * C CHECKSUM AND INITIALIZE THE EXECUTION OF KERNEL i * C * C i - Input integer; Test Kernel Serial Number * C TEMPUS - Input float ; Elapsed Cpu-time Test(i) used* C * C*********************************************************************** C cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) C C C/ PARAMETER( l1= 1001, l2= 101, l1d= 2*1001 ) C/ PARAMETER( l13= 64, l13h= l13/2, l213= l13+l13h, l813= 8*l13 ) C/ PARAMETER( l14=2048, l16= 75, l416= 4*l16 , l21= 25 ) C C/ PARAMETER( kn= 47, kn2= 95, np= 3, ls= 3*47, krs= 24) C COMMON /ALPHA/ mk,ik,im,ml,il,Mruns,Nruns,jr,iovec,NPFS(8,3,47) COMMON /TAU/ tclock, tsecov, testov, cumtim(4) C COMMON /BETA / tic, TIMES(8,3,47), SEE(5,3,8,3), 1 TERRS(8,3,47), CSUMS(8,3,47), 2 FOPN(8,3,47), DOS(8,3,47) C COMMON /SPACES/ ion,j5,k2,k3,MULTI,laps,Loop,m,kr,LP,n13h,ibuf,nx, 1 L,npass,nfail,n,n1,n2,n13,n213,n813,n14,n16,n416,n21,nt1,nt2, 2 last,idebug,mpy,Loops2,mucho,mpylim, intbuf(16) C COMMON /SPACER/ A11,A12,A13,A21,A22,A23,A31,A32,A33, 2 AR,BR,C0,CR,DI,DK, 3 DM22,DM23,DM24,DM25,DM26,DM27,DM28,DN,E3,E6,EXPMAX,FLX, 4 Q,QA,R,RI,S,SCALE,SIG,STB5,T,XNC,XNEI,XNM C COMMON /SPACE0/ TIME(47), CSUM(47), WW(47), WT(47), ticks, 1 FR(9), TERR1(47), SUMW(7), START, 2 SKALE(47), BIAS(47), WS(95), TOTAL(47), FLOPN(47), 3 IQ(7), NPF, NPFS1(47) C CPFM COMMON /KAPPA/ iflag1, ikern, statis(100,20), istats(100,20) C COMMON /SPACEI/ WTP(3), MUL(3), ISPAN(47,3), IPASS(47,3) C INTEGER E,F,ZONE COMMON /ISPACE/ E(96), F(96), 1 IX(1001), IR(1001), ZONE(300) C COMMON /SPACE1/ U(1001), V(1001), W(1001), 1 X(1001), Y(1001), Z(1001), G(1001), 2 DU1(101), DU2(101), DU3(101), GRD(1001), DEX(1001), 3 XI(1001), EX(1001), EX1(1001), DEX1(1001), 4 VX(1001), XX(1001), RX(1001), RH(2048), 5 VSP(101), VSTP(101), VXNE(101), VXND(101), 6 VE3(101), VLR(101), VLIN(101), B5(101), 7 PLAN(300), D(300), SA(101), SB(101) C C COMMON /SPACE2/ P(4,512), PX(25,101), CX(25,101), 1 VY(101,25), VH(101,7), VF(101,7), VG(101,7), VS(101,7), 2 ZA(101,7) , ZP(101,7), ZQ(101,7), ZR(101,7), ZM(101,7), 3 ZB(101,7) , ZU(101,7), ZV(101,7), ZZ(101,7), 4 B(64,64), C(64,64), H(64,64), 5 U1(5,101,2), U2(5,101,2), U3(5,101,2) C ik = i CALL TRACE ('TESTS ') C NP = Loop * Loops2 Loop = 1 LP = Loop NN = n IF( i.LT.0 .OR. i.GT.24 ) THEN CALL WHERE(0) ENDIF C IF( i.EQ.0 ) GO TO 120 CALL SIZES(i) C C Net Time= Timing - Overhead Time C TIME(i)= TEMPUS - REAL( NP) *testov - tsecov C C GO TO( 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, . 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, . 21, 22, 23, 24, 25 ), i C C C C*********************************************************************** C 1 CSUM (1) = SUMO ( X, n) TOTAL(1) = NP*NN GO TO 100 C*********************************************************************** C 2 CSUM (2) = SUMO ( X, 2*n) TOTAL(2) = NP*(NN-4) GO TO 100 C*********************************************************************** C 3 CSUM (3) = Q TOTAL(3) = NP*NN GO TO 100 C*********************************************************************** C 4 MM= (1001-7)/2 DO 400 k = 7,1001,MM 400 V(k)= X(k) CSUM (4) = SUMO ( V, 3) TOTAL(4) = NP*(((NN-5)/5)+1)*3 GO TO 100 C*********************************************************************** C 5 CSUM (5) = SUMO ( X(2), n-1) TOTAL(5) = NP*(NN-1) GO TO 100 C*********************************************************************** C 6 CSUM (6) = SUMO ( W, n) TOTAL(6) = NP*NN*((NN-1)/2) GO TO 100 C*********************************************************************** C 7 CSUM (7) = SUMO ( X, n) TOTAL(7) = NP*NN GO TO 100 C*********************************************************************** C 8 CSUM (8) = SUMO ( U1,5*n*2) + SUMO ( U2,5*n*2) + SUMO ( U3,5*n*2) TOTAL(8) = NP*(NN-1)*2 GO TO 100 C*********************************************************************** C 9 CSUM (9) = SUMO ( PX, 15*n) TOTAL(9) = NP*NN GO TO 100 C*********************************************************************** C 10 CSUM (10) = SUMO ( PX, 15*n) TOTAL(10) = NP*NN GO TO 100 C*********************************************************************** C 11 CSUM (11) = SUMO ( X(2), n-1) TOTAL(11) = NP*(NN-1) GO TO 100 C*********************************************************************** C 12 CSUM (12) = SUMO ( X, n-1) TOTAL(12) = NP*NN GO TO 100 C*********************************************************************** C 13 CSUM (13) = SUMO ( P, 8*n) + SUMO ( H, 8*n) TOTAL(13) = NP*NN GO TO 100 C*********************************************************************** C 14 CSUM (14) = SUMO ( VX,n) + SUMO ( XX,n) + SUMO ( RH,67) TOTAL(14) = NP*NN GO TO 100 C*********************************************************************** C 15 CSUM (15) = SUMO ( VY, n*7) + SUMO ( VS, n*7) TOTAL(15) = NP*(NN-1)*5 GO TO 100 C*********************************************************************** C 16 CSUM (16) = REAL( k3+k2+j5+m) FLOPN(16) = ( k2+k2+10*k3 ) * Loops2 TOTAL(16) = 1.0d0 GO TO 100 C*********************************************************************** C 17 CSUM (17) = SUMO ( VXNE, n) + SUMO ( VXND, n) + XNM TOTAL(17) = NP*NN GO TO 100 C*********************************************************************** C 18 CSUM (18) = SUMO ( ZR, n*7) + SUMO ( ZZ, n*7) TOTAL(18) = NP*(NN-1)*5 GO TO 100 C*********************************************************************** C 19 CSUM (19) = SUMO ( B5, n) + STB5 TOTAL(19) = NP*NN GO TO 100 C*********************************************************************** C 20 CSUM (20) = SUMO ( XX(2), n) TOTAL(20) = NP*NN GO TO 100 C*********************************************************************** C 21 CSUM (21) = SUMO ( PX, 25*n) TOTAL(21) = NP*25*25*NN GO TO 100 C*********************************************************************** C 22 CSUM (22) = SUMO ( W, n) TOTAL(22) = NP*NN GO TO 100 C*********************************************************************** C 23 CSUM (23) = SUMO ( ZA, n*7) TOTAL(23) = NP*(NN-1)*5 GO TO 100 C*********************************************************************** C 24 CSUM (24) = REAL(m) TOTAL(24) = NP*(NN-1) GO TO 100 C*********************************************************************** C 25 CONTINUE GO TO 100 C*********************************************************************** C 100 CONTINUE C C delta( testov)= relerr * testov overr= SEE(2,1,jr,il)*REAL(NP)* testov TERR1(i)= 100.0 IF( TIME(i).NE. 0.0d0) TERR1(i)= TERR1(i)*(overr/TIME(i)) NPFS1(i)= NPF IF( ion .LE. 0 ) GO TO 120 C C If this clock resolution test fails, you must increase Loop (Subr. SIZES) C IF( TERR1(i) .LT. 15.0) GO TO 114 WRITE( ion,113) I 113 FORMAT(/,1X,I2,' TESTS: POOR TIMING OR ERROR. NEED LONGER RUN') C 114 WRITE ( ion,115) i, TIME(i), TERR1(i), NPF 115 FORMAT( 2X,i2,9H Done T= ,E11.4,8H T err= ,F8.2,1H% , 1 I8,13H Page-Faults ) C 120 IF( i.GE.0 .AND. i.LT.24 ) THEN CALL VALUES(i+1) CALL SIZES (i+1) ENDIF C CALL TRACK ('TESTS ') RETURN END C C*********************************************** FUNCTION TICK( iou, ntimes) C*********************************************** C C TICK measures timing overhead of subroutine test C C iou - Logical Output Device Number * C C*********************************************** C cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) C C C/ PARAMETER( l1= 1001, l2= 101, l1d= 2*1001 ) C/ PARAMETER( l13= 64, l13h= l13/2, l213= l13+l13h, l813= 8*l13 ) C/ PARAMETER( l14=2048, l16= 75, l416= 4*l16 , l21= 25 ) C C/ PARAMETER( kn= 47, kn2= 95, np= 3, ls= 3*47, krs= 24) C C/ PARAMETER( nk= 47, nl= 3, nr= 8 ) parameter( l4813= 4*512, l4813p= l4813 + 1 ) INTEGER TEST C COMMON /ALPHA/ mk,ik,im,ml,il,Mruns,Nruns,jr,iovec,NPFS(8,3,47) COMMON /TAU/ tclock, tsecov, testov, cumtim(4) COMMON /BETA / tic, TIMES(8,3,47), SEE(5,3,8,3), 1 TERRS(8,3,47), CSUMS(8,3,47), 2 FOPN(8,3,47), DOS(8,3,47) C C COMMON /SPACES/ ion,j5,k2,k3,MULTI,laps,Loop,m,kr,LP,n13h,ibuf,nx, 1 L,npass,nfail,n,n1,n2,n13,n213,n813,n14,n16,n416,n21,nt1,nt2, 2 last,idebug,mpy,Loops2,mucho,mpylim, intbuf(16) C COMMON /SPACER/ A11,A12,A13,A21,A22,A23,A31,A32,A33, 2 AR,BR,C0,CR,DI,DK, 3 DM22,DM23,DM24,DM25,DM26,DM27,DM28,DN,E3,E6,EXPMAX,FLX, 4 Q,QA,R,RI,S,SCALE,SIG,STB5,T,XNC,XNEI,XNM C COMMON /SPACE0/ TIME(47), CSUM(47), WW(47), WT(47), ticks, 1 FR(9), TERR1(47), SUMW(7), START, 2 SKALE(47), BIAS(47), WS(95), TOTAL(47), FLOPN(47), 3 IQ(7), NPF, NPFS1(47) C COMMON /SPACEI/ WTP(3), MUL(3), ISPAN(47,3), IPASS(47,3) C INTEGER E,F,ZONE COMMON /ISPACE/ E(96), F(96), 1 IX(1001), IR(1001), ZONE(300) C COMMON /SPACE1/ U(1001), V(1001), W(1001), 1 X(1001), Y(1001), Z(1001), G(1001), 2 DU1(101), DU2(101), DU3(101), GRD(1001), DEX(1001), 3 XI(1001), EX(1001), EX1(1001), DEX1(1001), 4 VX(1001), XX(1001), RX(1001), RH(2048), 5 VSP(101), VSTP(101), VXNE(101), VXND(101), 6 VE3(101), VLR(101), VLIN(101), B5(101), 7 PLAN(300), D(300), SA(101), SB(101) C COMMON /SPACE2/ P(4,512), PX(25,101), CX(25,101), 1 VY(101,25), VH(101,7), VF(101,7), VG(101,7), VS(101,7), 2 ZA(101,7) , ZP(101,7), ZQ(101,7), ZR(101,7), ZM(101,7), 3 ZB(101,7) , ZU(101,7), ZV(101,7), ZZ(101,7), 4 B(64,64), C(64,64), H(64,64), 5 U1(5,101,2), U2(5,101,2), U3(5,101,2) C DIMENSION TIM(20), TER(20), TMX(20), INX(20), P1(l4813p) EQUIVALENCE( P,P1) SAVE retest C C CALL TRACE ('TICK ') C ion= iou kr = mk n = 0 k2 = 0 k3 = 0 m = 0 neff= 0 IF( il .EQ. 1 ) THEN C C*********************************************************************** C Measure tsecov: Overhead time for calling SECOND C*********************************************************************** C tsecov = SECOVT( iou) tic = tsecov C C*********************************************************************** C Measure testov: Overhead time for calling TEST C*********************************************************************** C testo= 0.00d0 klm= 8000 io= ABS(iou) jj= 0 nt= ntimes - 6 j= nt IF( nt.LT.8 .OR. nt.GT.30 ) GO TO 911 C DO 820 j= 1,nt L= 1 mpy= 1 Loops2= 1 mpylim= Loops2 Loop= klm LP= Loop C Measure overhead time for empty loop cumtim(1)= 0.0d0 t0= SECOND( cumtim(1)) 801 IF( TEST(-73) .GT. 0 ) GO TO 801 802 IF( TEST(-73) .GT. 0 ) GO TO 802 803 IF( TEST(-73) .GT. 0 ) GO TO 803 804 IF( TEST(-73) .GT. 0 ) GO TO 804 805 IF( TEST(-73) .GT. 0 ) GO TO 805 806 IF( TEST(-73) .GT. 0 ) GO TO 806 807 IF( TEST(-73) .GT. 0 ) GO TO 807 808 IF( TEST(-73) .GT. 0 ) GO TO 808 809 IF( TEST(-73) .GT. 0 ) GO TO 809 810 IF( TEST(-73) .GT. 0 ) GO TO 810 cumtim(1)= 0.0d0 t1= SECOND( cumtim(1)) - tsecov elapst= t1 - t0 testo= elapst/( REAL(10*klm) + 1.0e-9) toler= 0.020d0 rerr= 1.00d0 C C Convergence test: Rel.error .LT. 1% IF( elapst.GT. 1.00d04 ) GO TO 911 IF( elapst.LT. 1.00d-9 .AND. j.GT.8 ) GO TO 911 IF( elapst.GT. 1.00d-9 ) THEN jj= jj + 1 TIM(jj)= testo IF( jj.GT.1 ) THEN rerr= RELERR( TIM(jj), TIM(jj-1)) ENDIF TER(jj)= rerr ENDIF C IF( iou.GT.0 ) THEN WRITE( iou,64) 10*klm, testo, rerr ENDIF IF( rerr .LT. toler ) GO TO 825 IF( elapst.GT. 10.00d0 ) GO TO 822 klm= klm + klm 820 continue C Poor accuracy on exit from loop 822 IF( j .LE. 1 ) GO TO 911 IF( jj.LT. 1 ) GO TO 911 CALL SORDID( INX,TMX, TER,jj,1) testo= TIM( INX(1)) rerr= TMX(1) WRITE( io,63) 100.00d0*rerr C Good convergence, satifies 1% error tolerence 825 continue testov = testo retest = rerr * testov ENDIF C C*********************************************************************** C Generate data sets SEE(1,1,jr,il)= testov SEE(2,1,jr,il)= retest ticks = testov TICK = testov L = 1 Loop = 1 LP = Loop j = TEST(0) C DO 20 k= 1,47 TIME(k)= 0.0d0 CSUM(k)= 0.0d0 20 CONTINUE C IF( il .EQ. 1 ) THEN CALL STATS( SEE(1,2,jr,il), U, nt1) c CALL STATS( SEE(1,3,jr,il), P, nt2) CALL STATS( SEE(1,3,jr,il), P1(l4813+1), nt2-l4813) ELSE DO 45 k= 1,5 SEE( k,2,jr,il)= SEE( k,2,jr,1) SEE( k,3,jr,il)= SEE( k,3,jr,1) 45 continue ENDIF C IF( iou.GT.0 ) THEN WRITE( iou, 99) WRITE( iou,100) WRITE( iou,102) ( SEE(k,1,jr,il), k= 1,2) WRITE( iou,104) ( SEE(k,2,jr,il), k= 1,4) WRITE( iou,104) ( SEE(k,3,jr,il), k= 1,4) ENDIF C CALL TRACK ('TICK ') RETURN C 911 WRITE( io,61) WRITE( io,62) elapst, j CALL WHERE(0) C 61 FORMAT(1X,'FATAL(TICK): cant measure overhead time of subr. TEST') 62 FORMAT(/,13X,'using SECOND: elapst=',1E20.8,6X,'J=',I4) 63 FORMAT(1X,'WARNING(TICK): TEST overhead time relerr',f9.4,'%') 64 FORMAT(1X,'testov(TICK)',I12,E12.4,F11.4) 99 FORMAT(//,17H CLOCK OVERHEAD: ) 100 FORMAT(/,14X,7HAVERAGE,8X,7HSTANDEV,8X,7HMINIMUM,8X,7HMAXIMUM ) 102 FORMAT(/,1X,5H TICK,4E15.6) 104 FORMAT(/,1X,5H DATA,4E15.6) END C C*********************************************** SUBROUTINE TILE( sm, si, OX,IX,W,ew,T,tiles,n) C*********************************************** C C TILE computes m-tile value and corresponding index C C sm - RESULT VALUE IS m-TILE VALUE C si - RESULT VALUE IS CORRESPONDING INDEX.r IN W C C OX - INPUT ARRAY OF ORDERED (DECENDING) Xs. C IX - INPUT ARRAY OF INDEX LIST MAPS X TO OX. C W - INPUT ARRAY OF INPUT WEIGHTS. C ew - INPUT VALUE FLAGS EQUAL WEIGHTS= 1.0; ELSE 0.0d0 C T - INPUT VALUE IS SUM OF WEIGHTS C tiles - INPUT VALUE IS FRACTION OF RANGE, E.G. 0.25 C n - INPUT NUMBER OF INPUT VALUES IN X. C C*********************************************** cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) C DIMENSION OX(n), IX(n), W(n) C CALL TRACE ('TILE ') C thresh= tiles*T + 0.50d0*ew*W(1) R= 0.0d0 S= R DO 70 k= 1,n S= R R= R + W( IX(k)) IF( R .GT. thresh ) GO TO 7 70 CONTINUE k= n 7 z= 0.0d0 y= 0.0d0 IF( k.GT.1 ) y = OX(k-1) IF( R.NE.S ) z = ( thresh - S)/( R - S) sm= y + z * ( OX(k) - y) si= REAL(k-1) + z C CALL TRACK ('TILE ') RETURN END C C*********************************************** SUBROUTINE TRACE ( name ) C*********************************************** C C Records /DEBUG/ info: sequence of called subroutine names C Enters current subroutine name on top of /DEBUG/ stack C NOT NECESSARY FOR PERFORMANCE TEST, MAY BE DUMMIED. C C name - Input; Callers name C ISTACK - Contains names of subroutines in active linkage chain. C C Interupt shows active chain of subr. names in ISTACK: C bkp kernel C run C BREAKPOINT REACHED AT 00417457PB = KERNEL:KERNEL+201PB C bkp trap C run C BREAKPOINT REACHED AT 00450122PB = TRAP:TRAP+45PB C sub= tracks bcd istack,10 dec nstack,10 C C ISTACK(1) = "IQRANF VALUES TEST KERNEL MAIN. " C NSTACK(1) = 164 162 157 65 1 0 0 0 0 0 C C Setting TRACE call 5317 causes CALL to STOPS: C sub= tracks C set match= 5317 C rel all. C bkp trace C run C BREAKPOINT REACHED AT 00440575PB = STOPS:STOPS+6PB C sub= tracks bcd istack,10 dec nstack,10 C C ISTACK(1) = "SORDID STATW SENSIT REPORT MAIN. " C NSTACK(1) = 5317 5316 5308 5282 1 0 0 0 0 0 C C*********************************************** cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) C CHARACTER name*8, ISTACK*8 COMMON /DEBUG/ ISTACK(20) COMMON /ORDER/ inseq, match, NSTACK(20), isave, iret C C pushdown stack of subroutine names and call nrs. DO 1 k = 10,2,-1 NSTACK(k)= NSTACK(k-1) ISTACK(k)= ISTACK(k-1) 1 continue C inseq= inseq + 1 NSTACK(1)= inseq ISTACK(1)= name isave= inseq c WRITE( 6,111) inseq, ( ISTACK(k), k= 1,7 ) c 111 FORMAT(2X,I6,4X,10A8) C IF( inseq.EQ.match ) THEN CALL STOPS ENDIF C CALL WATCH(1) C RETURN END C C*********************************************** SUBROUTINE STOPS C*********************************************** C C This routine is a convenient program break-point which is C selected by pre-setting: match in COMMON /ORDER/ or by data C loading in BLOCK DATA to equal the serial index of a C particular call to TRACE , as previously recorded in NSTACK. C The call to STOPS is selected in subroutine TRACE . C C PAUSE 1 RETURN END C C*********************************************** SUBROUTINE TRACK( name ) C*********************************************** C C Releases current subroutine name from top of /DEBUG/ stack C NOT NECESSARY FOR PERFORMANCE TEST, MAY BE DUMMIED. C C*********************************************** cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) C CHARACTER name*8, ISTACK*8 COMMON /DEBUG/ ISTACK(20) COMMON /ORDER/ inseq, match, NSTACK(20), isave, iret C iret= iret + 1 CALL WATCH(2) C pop stack of subroutine names IF( name.EQ. ISTACK(1)) THEN DO 1 k = 1,9 NSTACK(k)= NSTACK(k+1) ISTACK(k)= ISTACK(k+1) 1 continue ELSE ISTACK(20)= name CALL WHERE(12) ENDIF C RETURN END C C*********************************************** SUBROUTINE TRAP( I, name, mini, maxi,meff) C*********************************************** C C Checks that Index List values are in valid domain C C I - ARRAY OF INPUT INDEX-LIST C name - INPUT CALLERS name C mini - INPUT SMALLEST INDEX VALUE C maxi - INPUT LARGEST INDEX VALUE C meff - NUMBER OF INPUT VALUES IN I. C C*********************************************** cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) C COMMON /SPACES/ ion,j5,k2,k3,MULTI,laps,Loop,m,kr,LP,n13h,ibuf,nx, 1 L,npass,nfail,n,n1,n2,n13,n213,n813,n14,n16,n416,n21,nt1,nt2, 2 last,idebug,mpy,Loops2,mucho,mpylim, intbuf(16) DIMENSION I(meff) C CALL TRACE ('TRAP ') C LX= 0 DO 1 k= 1,meff IF( I(k).LT.mini .OR. I(k).GT.maxi ) LX= k 1 CONTINUE C IF( LX.NE.0 ) THEN io= ABS( ion) IF( io.LE.0 .OR. io.GT.10 ) io=6 WRITE( io,110) LX, name 110 FORMAT(////,' TRAP: ERROR IN INDEX-LIST(',i4,') IN SUBR: ',A ) WRITE( io,113) I 113 FORMAT(1X,10I6) C CALL WHERE(0) ENDIF C CALL TRACK ('TRAP ') RETURN END C C*********************************************** SUBROUTINE TRIAL( iou, i, t0, tj ) C*********************************************** C C TRIAL - validates checksums of current run for endurance trial C C*********************************************************************** C cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) DOUBLE PRECISION SUMS REDUNDNT C C/ PARAMETER( kn= 47, kn2= 95, np= 3, ls= 3*47, krs= 24) C/ PARAMETER( nk= 47, nl= 3, nr= 8 ) parameter( mall= 24 * 3 ) c COMMON /ALPHA/ mk,ik,im,ml,il,Mruns,Nruns,jr,iovec,NPFS(8,3,47) C COMMON /BETA / tic, TIMES(8,3,47), SEE(5,3,8,3), 1 TERRS(8,3,47), CSUMS(8,3,47), 2 FOPN(8,3,47), DOS(8,3,47) C COMMON /SPACES/ ion,j5,k2,k3,MULTI,laps,Loop,m,kr,LP,n13h,ibuf,nx, 1 L,npass,nfail,n,n1,n2,n13,n213,n813,n14,n16,n416,n21,nt1,nt2, 2 last,idebug,mpy,Loops2,mucho,mpylim, intbuf(16) C COMMON /TAU/ tclock, tsecov, testov, cumtim(4) C COMMON /PROOF/ SUMS(24,3,8) DIMENSION ID(mall), LD(mall), CS1(mall), CS2(mall) SAVE isum MODI(ii,mm)= (MOD( ABS(ii)-1, mm) + 1) NPER(ii,mm)= ((ABS(ii)-1+mm)/(mm)) C CALL TRACE ('TRIAL ') C IF( i.EQ.1 ) THEN estime= (tj-t0) + REAL( Mruns) *( SECOND(0) - tj) WRITE( iou,70) estime, Nruns WRITE( *,70) estime, Nruns 70 FORMAT(/,' ESTIMATED TOTAL JOB CPU-TIME:=' ,F10.3,' sec.', 1 ' ( Nruns=',I8,' Trials)',/) ENDIF C ijk= 4 IF( MULTI.LE. 1 ) ijk= 1 IF( MULTI.EQ. 10 ) ijk= 2 IF( MULTI.EQ. 50 ) ijk= 3 IF( MULTI.GE. 100 ) ijk= 4 c lx= 0 DO 1 j= im,ml DO 1 k= 1,24 lx= lx + 1 CS1(lx)= CSUMS(jr,j,k) CS2(lx)= SUMS(k,j,ijk) 1 continue c CALL SEQDIG( ID, isum, CS1, CS2, mall) c IF( i.EQ.1 ) THEN c DO 2 k= 1,mall LD(k)= ID(k) 2 continue ELSE IF( isum.EQ.last .AND. isum.GT.200 ) THEN npass= npass + 1 ELSE nfail= nfail + 1 c DO 4 k= 1,mall IF( ID(k) .NE. LD(k)) THEN WRITE( iou,333) i, MODI(k,24), NPER(k,24), ID(k), LD(k) ENDIF 4 continue ENDIF ENDIF c c IF( i.LE.7 .OR. MODI(i,7).EQ.1 ) THEN WRITE( iou,111) i, isum, npass, nfail WRITE( *,111) i, isum, npass, nfail 111 FORMAT(' Trial=',I7,13X,'ChkSum=',I5,4X,'Pass=',I7,5X,'Fail=',I7) c c cumtim(1)= 0.0d0 c tjob= SECOND( cumtim(1)) - t0 c WRITE( iou,123) tjob c WRITE( *,123) tjob c 123 FORMAT(2X,'Tcpu=',4X,F10.2,' sec') c c WRITE( iou,222) ( MODI(k,24), ID(k), CS1(k), CS2(k), k= 1,mall ) c 222 FORMAT(2X,2I6,3X,2E24.16) 333 FORMAT(1X,'TRIAL:',I7,6X,'Kernel=',I5,6X,'j= ',I7,6X,'ERROR',2I7) ENDIF last= isum ibuf= 0 C CALL TRACK ('TRIAL ') RETURN END C C*********************************************** SUBROUTINE VALID( VX,MAP,LX, BL,X,BU,n ) C*********************************************** C C Compress valid data sets; form compression list. C C C VX - ARRAY OF RESULT COMPRESSED Xs. C MAP - ARRAY OF RESULT COMPRESSION INDICES C LX - RESULT COMPRESSED LENGTH OF VX, MAP C - C BL - INPUT LOWER BOUND FOR VX C X - ARRAY OF INPUT VALUES. C BU - INPUT UPPER BOUND FOR VX C n - NUMBER OF INPUT VALUES IN X. C C*********************************************** cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) C DIMENSION VX(n), MAP(n), X(n) CLLL. OPTIMIZE LEVEL G C CALL TRACE ('VALID ') C m= 0 LX= 0 IF( n.LE.0 ) GO TO 73 DO 1 k= 1,n IF( X(k).LE. BL .OR. X(k).GE. BU ) GO TO 1 m= m + 1 MAP(m)= k VX(m)= X(k) 1 CONTINUE C LX= m IF( m.GT.0 ) THEN CALL TRAP( MAP, 8H VALID , 1, n,m) ENDIF 73 CONTINUE CALL TRACK ('VALID ') RETURN END C C*********************************************** SUBROUTINE VALUES(i) C*********************************************** C C VALUES initializes special values C C i := kernel number C C**************************************************************************** cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) DOUBLE PRECISION DS, DW REDUNDNT C C/ PARAMETER( l1= 1001, l2= 101, l1d= 2*1001 ) C/ PARAMETER( l13= 64, l13h= 64/2, l213= 64+32, l813= 8*64 ) C/ PARAMETER( l14= 2048, l16= 75, l416= 4*75 , l21= 25) C C/ PARAMETER( kn= 47, kn2= 95, np= 3, ls= 3*47, krs= 24) C COMMON /SPACES/ ion,j5,k2,k3,MULTI,laps,Loop,m,kr,LP,n13h,ibuf,nx, 1 L,npass,nfail,n,n1,n2,n13,n213,n813,n14,n16,n416,n21,nt1,nt2, 2 last,idebug,mpy,Loops2,mucho,mpylim, intbuf(16) C COMMON /SPACER/ A11,A12,A13,A21,A22,A23,A31,A32,A33, 2 AR,BR,C0,CR,DI,DK, 3 DM22,DM23,DM24,DM25,DM26,DM27,DM28,DN,E3,E6,EXPMAX,FLX, 4 Q,QA,R,RI,S,SCALE,SIG,STB5,T,XNC,XNEI,XNM C COMMON /SPACE0/ TIME(47), CSUM(47), WW(47), WT(47), ticks, 1 FR(9), TERR1(47), SUMW(7), START, 2 SKALE(47), BIAS(47), WS(95), TOTAL(47), FLOPN(47), 3 IQ(7), NPF, NPFS1(47) C COMMON /SPACEI/ WTP(3), MUL(3), ISPAN(47,3), IPASS(47,3) C INTEGER E,F,ZONE COMMON /ISPACE/ E(96), F(96), 1 IX(1001), IR(1001), ZONE(300) C COMMON /SPACE1/ U(1001), V(1001), W(1001), 1 X(1001), Y(1001), Z(1001), G(1001), 2 DU1(101), DU2(101), DU3(101), GRD(1001), DEX(1001), 3 XI(1001), EX(1001), EX1(1001), DEX1(1001), 4 VX(1001), XX(1001), RX(1001), RH(2048), 5 VSP(101), VSTP(101), VXNE(101), VXND(101), 6 VE3(101), VLR(101), VLIN(101), B5(101), 7 PLAN(300), D(300), SA(101), SB(101) C COMMON /SPACE2/ P(4,512), PX(25,101), CX(25,101), 1 VY(101,25), VH(101,7), VF(101,7), VG(101,7), VS(101,7), 2 ZA(101,7) , ZP(101,7), ZQ(101,7), ZR(101,7), ZM(101,7), 3 ZB(101,7) , ZU(101,7), ZV(101,7), ZZ(101,7), 4 B(64,64), C(64,64), H(64,64), 5 U1(5,101,2), U2(5,101,2), U3(5,101,2) C COMMON /BASE2/ P0(4,512), PX0(25,101), CX0(25,101), 1 VY0(101,25), VH0(101,7), VF0(101,7), VG0(101,7), VS0(101,7), 2 ZA0(101,7) , ZP0(101,7), ZQ0(101,7), ZR0(101,7), ZM0(101,7), 3 ZB0(101,7) , ZU0(101,7), ZV0(101,7), ZZ0(101,7), 4 B0(64,64), CC0(64,64), H0(64,64), 5 U10(5,101,2), U20(5,101,2), U30(5,101,2) C COMMON /SPACE3/ CACHE(8192) C C ****************************************************************** CALL TRACE ('VALUES ') C CALL SIZES (i) IP1= i c Initialize the dummy Cache-memory with never used data-set. DO 666 k= 1,8192 CACHE(k)= 0.10 666 CONTINUE C CALL SUPPLY( i) C IF( IP1.NE.13 ) GO TO 14 DS= 1.000d0 DW= 0.500d0 DO 205 j= 1,4 DO 205 k= 1,512 P(j,k) = DS P0(j,k) = DS DS= DS + DW 205 CONTINUE C DO 210 j= 1,96 E(j) = 1 F(j) = 1 210 CONTINUE C 14 IF( IP1.NE.14) GO TO 16 C mmin= 1 mmax= 1001 CALL IQRANF( IX, mmin, mmax, 1001) c DW= -100.000d0 DO 215 J= 1,1001 DEX(J) = DW*DEX(J) GRD(J) = IX(J) 215 CONTINUE FLX= 0.00100d0 C 16 IF( IP1.NE.16 ) GO TO 50 CONDITIONS: MC= 2 lr= n II= lr/3 FW= 1.000d-4 D(1)= 1.0198048642876400d0 DO 400 k= 2,300 400 D(k)= D(k-1) + FW/D(k-1) R= D(lr) FW= 1.000d0 DO 403 LX= 1,MC m= (lr+lr)*(LX-1) DO 401 j= 1,2 DO 401 k= 1,lr m= m+1 S= REAL(k) PLAN(m)= R*((S + FW)/S) 401 ZONE(m)= k+k 403 CONTINUE k= lr+lr+1 ZONE(k)= lr S= D(lr-1) T= D(lr-2) C 50 CONTINUE c Clear the scalar Cache-memory with never used data-set. c fw= 1.000d0 c CALL SIGNEL( CACHE, fw, 0.0d0, 8192) c j= 0 sc= 0.0d0 DO 777 k= 1,8192 IF( CACHE(k).EQ. 0.0) THEN j= j + k sc= sc + REAL(j*k) ENDIF 777 CONTINUE C CALL TRACK ('VALUES ') RETURN END C C*********************************************** SUBROUTINE VERIFY( iou ) C*********************************************************************** C * C VERIFY auxiliary test routine to check-out function SECOND * C and to verify that sufficiently long Loop sizes are * C defined in Subr. SIZES for accurate CPU timing. * C * C iou - Logical Output Device Number * C * C*********************************************************************** cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) C CLOX REAL*8 SECOND C C/C/ PARAMETER( l1= 1001, l2= 101, l1d= 2*1001 ) C/C/ PARAMETER( l13= 64, l13h= 64/2, l213= 64+32, l813= 8*64 ) C/C/ PARAMETER( l14= 2048, l16= 75, l416= 4*75 , l21= 25) C/C/ PARAMETER( kn= 47, kn2= 95, np= 3, ls= 3*47, krs= 24) C parameter( ntmp= 100 ) C COMMON /SPACE1/ U(1001), V(1001), W(1001), 1 X(1001), Y(1001), Z(1001), G(1001), 2 DU1(101), DU2(101), DU3(101), GRD(1001), DEX(1001), 3 XI(1001), EX(1001), EX1(1001), DEX1(1001), 4 VX(1001), XX(1001), RX(1001), RH(2048), 5 VSP(101), VSTP(101), VXNE(101), VXND(101), 6 VE3(101), VLR(101), VLIN(101), B5(101), 7 PLAN(300), D(300), SA(101), SB(101) C COMMON /SPACE2/ P(4,512), PX(25,101), CX(25,101), 1 VY(101,25), VH(101,7), VF(101,7), VG(101,7), VS(101,7), 2 ZA(101,7) , ZP(101,7), ZQ(101,7), ZR(101,7), ZM(101,7), 3 ZB(101,7) , ZU(101,7), ZV(101,7), ZZ(101,7), 4 B(64,64), C(64,64), H(64,64), 5 U1(5,101,2), U2(5,101,2), U3(5,101,2) C COMMON /ALPHA/ mk,ik,im,ml,il,Mruns,Nruns,jr,iovec,NPFS(8,3,47) COMMON /TAU/ tclock, tsecov, testov, cumtim(4) C COMMON /BETA / tic, TIMES(8,3,47), SEE(5,3,8,3), 1 TERRS(8,3,47), CSUMS(8,3,47), 2 FOPN(8,3,47), DOS(8,3,47) C COMMON /SPACES/ ion,j5,k2,k3,MULTI,laps,Loop,m,kr,LP,n13h,ibuf,nx, 1 L,npass,nfail,n,n1,n2,n13,n213,n813,n14,n16,n416,n21,nt1,nt2, 2 last,idebug,mpy,Loops2,mucho,mpylim, intbuf(16) C COMMON /SPACEI/ WTP(3), MUL(3), ISPAN(47,3), IPASS(47,3) C C DIMENSION TIM(ntmp), TUM(ntmp), TAV(ntmp), TER(ntmp) DIMENSION TMX(ntmp), SIG(ntmp), LEN(ntmp) C C C CALL TRACE ('VERIFY ') c DO 1 k = 1,101 X(k)= 0.0d0 Y(k)= 0.0d0 1 CX(1,k)= 0.0d0 nzd= 0 C C*********************************************************************** C Measure tsecov: Overhead time for calling SECOND C*********************************************************************** C tsecov = SECOVT( iou) tic = tsecov C C*********************************************************************** C Measure time resolution of cpu-timer; tclock= MIN t C*********************************************************************** C fuzz= 1.00d-12 nticks= INT( 1.00d0/( tsecov + fuzz )) IF( nticks.LT.1000 ) nticks= 1000 dt= 0.00d0 t1= SECOND( cum) m= 0 C DO 2 k= 1,nticks t2= SECOND( cum) IF( t2 .NE. t1 ) THEN m= m + 1 dt= dt + ( t2 - t1 ) t1= t2 IF( m .GE. 200 ) GO TO 3 ENDIF 2 continue C 3 IF( m.LE.2 ) THEN tclock= 1.00d0 WRITE( *,163) WRITE( iou,163) ELSE tclock= dt/( REAL(m) + fuzz ) ENDIF C WRITE( *,164) m, tclock WRITE( iou,164) m, tclock 163 FORMAT(1X,'WARNING(VERIFY): POOR Cpu-timer resolution; REPLACE?') 164 FORMAT('VERIFY:',I10,E12.4,' = Time Resolution of Cpu-timer') C C**************************************************************************** C VERIFY ADEQUATE Loop SIZE VERSUS CPU CLOCK ACCURACY C**************************************************************************** C C VERIFY produced the following output on CRAY-XMP4 in a C fully loaded, multi-processing, multi-programming system: C C C VERIFY ADEQUATE Loop SIZE VERSUS CPU CLOCK ACCURACY C ----- ------- ------- ------- -------- C EXTRA MAXIMUM DIGITAL DYNAMIC RELATIVE C Loop CPUTIME CLOCK CLOCK TIMING C SIZE SECONDS ERROR ERROR ERROR C ----- ------- ------- ------- -------- C 1 5.0000e-06 10.00% 17.63% 14.26% C 2 7.0000e-06 7.14% 6.93% 4.79% C 4 1.6000e-05 3.12% 6.56% 7.59% C 8 2.8000e-05 1.79% 2.90% 2.35% C 16 6.1000e-05 0.82% 6.72% 4.50% C 32 1.1700e-04 0.43% 4.21% 4.62% C 64 2.2700e-04 0.22% 3.13% 2.41% C 128 4.4900e-04 0.11% 3.14% 0.96% C 256 8.8900e-04 0.06% 2.06% 2.50% C 512 1.7740e-03 0.03% 1.92% 1.59% C 1024 3.4780e-03 0.01% 0.70% 1.63% C 1360 Current Run: MULTI= 10.000 C 2048 7.0050e-03 0.01% 0.74% 1.28% C 4096 1.3823e-02 0.00% 1.35% 0.78% C ----- ------- ------- ------- -------- C C Approximate Serial Job Time= 2.5e+01 Sec. ( Nruns= 7 RUNS) C C**************************************************************************** C WRITE( iou,45) WRITE( iou,49) WRITE( iou,46) WRITE( iou,47) WRITE( iou,48) WRITE( iou,49) 45 FORMAT(/,8X,'VERIFY ADEQUATE Loop SIZE VERSUS CPU CLOCK ACCURACY') 46 FORMAT(8X,'EXTRA MAXIMUM DIGITAL DYNAMIC RELATIVE') 47 FORMAT(8X,'Loop CPUTIME CLOCK CLOCK TIMING ') 48 FORMAT(8X,'SIZE SECONDS ERROR ERROR ERROR ') 49 FORMAT(8X,'----- ------- ------- ------- --------') C C C**************************************************************************** C Measure Cpu Clock Timing Errors As A Function Of Loop Size(lo) C**************************************************************************** C ttest= 100.00d0 * tclock ilimit= 30 nj= 5 lo= 128 i= 0 C 10 i= i + 1 lo= lo + lo DO 53 j= 1,nj n= 100 cumtim(1)= 0.0d0 t0= SECOND( cumtim(1)) c Time Kernel 12 DO 12 m = 1,lo DO 12 k = 1,n 12 X(k)= X(k+1) - X(k) c cumtim(1)= 0.0d0 TIM(j)= SECOND( cumtim(1)) - t0 - tsecov 53 continue c Compute Dynamic Clock Error c CALL STATS( TUM, TIM, nj) rterr= 100.0*( TUM(2)/( TUM(1) + fuzz )) IF( TUM(1).LE. 0.00d0) rterr= 100.00d0 c c Compute Digital Clock Error c CALL TDIGIT( SIG(i), nzd, TUM(4)) C TAV(i)= TUM(1) TMX(i)= TUM(4) TER(i)= rterr LEN(i)= lo IF( i.GT.ilimit .AND. ( TUM(1).LT.fuzz )) THEN WRITE( *,146) lo, TUM(1) 146 FORMAT('VERIFY:',I12,' Repetitions. Bad Timer=',E14.5,' sec.') ENDIF IF( i.LE.8 .OR. ( TUM(1).LT.ttest .AND. i.LT.ntmp )) GO TO 10 nn= i C C**************************************************************************** C Compute Multiple-Pass Loop Counters MULTI and Loops2 C Such that: each Kernel is run at least 100 ticks of Cpu-timer. C**************************************************************************** C i2= 2 MULTI= 1 mucho= 1 CALL SIZES(12) loop12= IPASS(12,2) * MUL(2) C MULTI= INT( (REAL(lo)/(REAL(loop12)+fuzz))*(ttest/(TUM(1)+fuzz))) mucho= MULTI C C If timing errors are too large, you must increase MULTI... C When MULTI.GE.100 each kernel is executed over a million times C and the time used to re-intialize overstored input variables C is negligible. Thus each kernel may be run arbitrarily many times C (MULTI >> 100) without overflow and produce verifiable checksums. c C Each kernel's results are automatically checksummed for MULTI := c C MULTI= 1 clock resolution << 0.01 SEC, or Cpu << 1 Mflops C MULTI= 10 clock resolution << 0.01 SEC, or Cpu < 2 Mflops C MULTI= 50 clock resolution <= 0.01 SEC, or Cpu < 2 Mflops C MULTI= 100 clock resolution <= 0.01 SEC, or Cpu < 5 Mflops C MULTI= 200 clock resolution <= 0.01 SEC, or Cpu < 10 Mflops C c MULTI= 1 c MULTI= 10 c MULTI= 50 c MULTI= 100 c MULTI= 200 C mpy= 1 Loops2= 1 mpylim= Loops2 IF( MULTI.LE. 1 ) THEN MULTI = 1 ELSEIF( MULTI.LE. 10 ) THEN MULTI = 10 ELSEIF( MULTI.LE. 50 ) THEN MULTI = 50 ELSEIF( MULTI.LE.100 ) THEN MULTI = 100 ELSE Loops2= (MULTI + 50)/100 mpylim= Loops2 MULTI = 100 ENDIF C C mucho= MULTI loops0= loop12 * MULTI * Loops2 repeat= REAL( MULTI * Loops2 ) IF( Loop.EQ.1 ) repeat= 1.00d0/( REAL( loop12) + fuzz) C C**************************************************************************** C Estimate Timing Error By Comparing Time Of Each Run With Longest Run C**************************************************************************** C m= 0 tnn= ( TAV(nn) + 2.00d0* TAV(nn-1))* 0.500d0 fuzz= 1.0d-12 IF( tnn.LT.fuzz) tnn= fuzz DO 69 i= 1,nn rterr= TER(i) lo= LEN(i) c Compute Relative Clock Error c rt= 0.0d0 IF( LEN(i).GE. 0) rt= LEN(nn)/LEN(i) rperr= 100.00d0 IF( tnn.GT.fuzz) rperr= 100.00d0*(ABS( tnn - rt*TAV(i))/tnn) WRITE( iou,64) lo, TMX(i), SIG(i),rterr, rperr 64 FORMAT(6X,I7,E12.4,F11.2,1H%,F10.2,1H%,F10.2,1H%) c c Find loops0 Size Used c IF( (loops0.GE.lo) .AND. (loops0.LE.2*lo)) THEN m= lo WRITE( iou,66) loops0, repeat WRITE( *,66) loops0, repeat IF( rterr .GT. 10.00d0) THEN WRITE( iou, 67) WRITE( iou, 68) WRITE( *, 67) WRITE( *, 68) ENDIF 66 FORMAT(7X,i6,7X,'Repetition Count = MULTI * Loops2 = ',F12.3) 67 FORMAT(34X,46HVERIFY: POOR TIMING OR ERROR. NEED LONGER RUN ) 68 FORMAT(34X,34HINCREASE: MULTI IN SUBR. VERIFY ) ENDIF C 69 continue IF( m.LE.0 ) THEN WRITE( iou,66) loops0, repeat WRITE( *,66) loops0, repeat ENDIF WRITE( iou,49) C C WRITE( *,991) WRITE( *,992) 991 FORMAT(/,16X,' (C) Copyright 1983 the Regents of the ') 992 FORMAT( 16X,'University of California. All Rights Reserved.',/) C C**************************************************************************** C Clock Calibration Test of Internal Cpu-timer SECOND; C Verify 10 Internal SECOND Intervals using External Stopwatch C**************************************************************************** C C 106 FORMAT(//,' CLOCK CALIBRATION TEST OF INTERNAL CPU-TIMER: SECOND') 107 FORMAT(' MONOPROCESS THIS TEST, STANDALONE, NO TIMESHARING.') 108 FORMAT(' VERIFY TIMED INTERVALS SHOWN BELOW USING EXTERNAL CLOCK') 109 FORMAT(' START YOUR STOPWATCH NOW !') 113 FORMAT(/,11X,'Verify T or DT observe external clock(sec):',/) 114 FORMAT(' ------- ------- ------ -----') 115 FORMAT(' Total T ? Delta T ? Mflops ? Flops') 119 FORMAT(4X,I2,3F12.2,2E15.5) 120 FORMAT(' END CALIBRATION TEST.',/) WRITE( iou,106) WRITE( iou,107) WRITE( iou,108) WRITE( iou,109) WRITE( iou,113) WRITE( iou,114) WRITE( iou,115) WRITE( iou,114) WRITE( *,106) WRITE( *,107) WRITE( *,108) WRITE( *,109) WRITE( *,113) WRITE( *,114) WRITE( *,115) WRITE( *,114) C task= 10.00d0 passes= REAL(lo) * ( task/( tnn + fuzz)) loiter= INT( passes ) flops= 0.00d0 cumtim(1)= 0.0d0 t1= SECOND( cumtim(1)) t2= 0.00d0 C DO 86 j= 1,4 n= 100 t0= t1 c Time Kernel 12 DO 82 m = 1,loiter DO 82 k = 1,n 82 X(k)= X(k+1) - X(k) c cumtim(1)= 0.0d0 t1= SECOND( cumtim(1)) td= t1 - t0 -tsecov t2= t2 + td flops= flops + passes*REAL(n) ratemf= ( 1.00d-6 * flops )/( t2 + fuzz ) WRITE( *,119) j, t2, td, ratemf, flops WRITE( iou,119) j, t2, td, ratemf, flops 86 continue WRITE( iou,114) WRITE( iou,120) WRITE( *,114) WRITE( *,120) C C CALL TRACK ('VERIFY ') RETURN END C C*********************************************** SUBROUTINE WATCH( mode) C*********************************************** C C WATCH is called at every subroutine entry and exit point by TRACE . C COMMON variables may be tested continually during execution(watched) C for known error conditions so the occurance of the error is localized. C WATCH may be used for programmable data-breakpoints to aid debugging. C C*********************************************** cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) C c parameter( ntests= 1, krs1= 24 + 1 ) parameter( ntests= 14, krs1= 24 + 1 ) C CHARACTER name*8, ISTACK*8 COMMON /DEBUG/ ISTACK(20) COMMON /ORDER/ inseq, match, NSTACK(20), isave, iret C COMMON /ALPHA/ mk,ik,im,ml,il,Mruns,Nruns,jr,iovec,NPFS(8,3,47) COMMON /TAU/ tclock, tsecov, testov, cumtim(4) COMMON /BETA / tic, TIMES(8,3,47), SEE(5,3,8,3), 1 TERRS(8,3,47), CSUMS(8,3,47), 2 FOPN(8,3,47), DOS(8,3,47) C COMMON /SPACE0/ TIME(47), CSUM(47), WW(47), WT(47), ticks, 1 FR(9), TERR1(47), SUMW(7), START, 2 SKALE(47), BIAS(47), WS(95), TOTAL(47), FLOPN(47), 3 IQ(7), NPF, NPFS1(47) C COMMON /SPACES/ ion,j5,k2,k3,MULTI,laps,Loop,m,kr,LP,n13h,ibuf,nx, 1 L,npass,nfail,n,n1,n2,n13,n213,n813,n14,n16,n416,n21,nt1,nt2, 2 last,idebug,mpy,Loops2,mucho,mpylim, intbuf(16) DIMENSION IE(20) c LOGICAL BOUNDS c BOUNDS(A,X,B,E)= ((((A)*(1.-E)).LE.(X)).AND.((X).LE.((B)*(1.+E)))) C C Debug Trace Info name= 'watch' c IF( made.EQ.1 ) name= ' ENTRY ' c IF( made.EQ.2 ) name= ' RETURN ' c WRITE(*,101) inseq, name, ISTACK(1) c 101 FORMAT(1X,I6,5X,A ,1X,A ) C C Domain Tests of Critical Variables DO 1 k= 1,ntests 1 IE(k)= 0 IF( testov .NE. ticks ) IE(1)= 1 IF( tsecov .NE. tic ) IE(2)= 2 IF( inseq.LE.0 .OR. inseq.NE.isave .OR. inseq.GT.99999) IE(3)= 3 IF( Nruns.LT.1 .OR. Nruns.GT.8 ) IE(4)= 4 IF( il.LT.1 .OR. il.GT.3 ) IE(5)= 5 IF( mk.LT.1 .OR. mk.GT.24 ) IE(6)= 6 IF( ik.LT.0 .OR. ik.GT.krs1 ) IE(7)= 7 IF( jr.LT.1 .OR. jr.GT.8 ) IE(8)= 8 IF( Loops2 .LT. 1 ) IE(9)= 9 IF( Loops2 .NE. mpylim ) IE(10)= 10 IF( MULTI .LT. 1 ) IE(11)= 11 IF( MULTI .NE. mucho ) IE(12)= 12 IF( Loop .LT. 1 ) IE(13)= 13 IF( Loop .NE. LP ) IE(14)= 14 C C Insert your debug data tests here c IF( BOUNDS( 1.7669e+5,CSUMS(jr,1,8),1.7669e+5,1.0e-3)) IE(15)= 15 C ierr= 0 DO 2 k= 1,ntests 2 ierr= ierr + IE(k) IF( ierr.NE.0 ) THEN io= ABS( ion) IF( io.LE.0 .OR. io.GT.10 ) io=6 k1=0 k2=0 WRITE( *,111) WRITE( *,112) ( k , k= 1,ntests ) WRITE( *,112) ( IE(k), k= 1,ntests ) WRITE( *,112) k1,k2,inseq,Nruns,il,mk,ik,jr, . Loops2,mpylim,MULTI,mucho,Loop,LP WRITE( io,111) WRITE( io,112) ( k , k= 1,ntests ) WRITE( io,112) ( IE(k), k= 1,ntests ) WRITE( io,112) k1,k2,inseq,Nruns,il,mk,ik,jr, . Loops2,mpylim,MULTI,mucho,Loop,LP 111 FORMAT(/,' WATCH: STORAGE FAULT DETECTED. IE=') 112 FORMAT(1X,15I5) CALL WHERE( mode) ENDIF RETURN END C C*********************************************** SUBROUTINE WHERE( mode) C*********************************************** C C Prints Subroutine names in the active linkage chain for debugging. C C*********************************************** cANSI IMPLICIT DOUBLE PRECISION (A-H,O-Z) cIBM IMPLICIT REAL*8 (A-H,O-Z) C parameter( insert= 2 ) COMMON /SPACES/ ion,j5,k2,k3,MULTI,laps,Loop,m,kr,LP,n13h,ibuf,nx, 1 L,npass,nfail,n,n1,n2,n13,n213,n813,n14,n16,n416,n21,nt1,nt2, 2 last,idebug,mpy,Loops2,mucho,mpylim, intbuf(16) C CHARACTER name*8, ISTACK*8 COMMON /DEBUG/ ISTACK(20) COMMON /ORDER/ inseq, match, NSTACK(20), isave, iret C made= MOD( mode,10) name= 'internal' IF( made.EQ.1 ) name= ' ENTRY ' IF( made.EQ.2 ) name= ' RETURN ' io= ABS( ion) IF( io.LE.0 .OR. io.GT.10 ) io=6 C IF( mode.EQ.12 ) THEN WRITE( *,112) ISTACK(20), ISTACK(1) WRITE( io,112) ISTACK(20), ISTACK(1) 112 FORMAT(2X,'WHERE: SEQ.ERROR. RETURN ',A ,'.NE. CALL ',A ) ENDIF C CPFM IF( mode.EQ.20 ) THEN CPFM WRITE( io,9) CPFM9 FORMAT(2X,'WHERE: INIPFM FAILED.' ) CPFM ENDIF WRITE( *,110) name, ISTACK(1) WRITE( io,110) name, ISTACK(1) 110 FORMAT(/,' WHERE: ERROR detected at ',A ,' point in: ',A ) C IF( made.EQ.1 .OR. made.EQ.2 ) THEN C Pushdown stack of subroutine names and call nrs. DO 1 k = 12,insert+1,-1 NSTACK(k)= NSTACK(k-insert) ISTACK(k)= ISTACK(k-insert) 1 continue C NSTACK(1)= inseq ISTACK(1)= 'WATCH ' NSTACK(2)= inseq ISTACK(2)= 'TRACE ' IF( made.EQ.2 ) ISTACK(2)= 'TRACK ' ENDIF WRITE( *,111) WRITE( *,114) WRITE( *,113) WRITE( *,114) WRITE( *,118) ( ISTACK(k), NSTACK(k), k= 1,12 ) C WRITE( io,111) WRITE( io,114) WRITE( io,113) WRITE( io,114) WRITE( io,118) ( ISTACK(k), NSTACK(k), k= 1,12 ) 111 FORMAT(/,' ACTIVE SUBROUTINE LINKAGE CHAIN:') 114 FORMAT(' ---- -----------') 113 FORMAT(' name call number') 118 FORMAT(10X,A ,4X,I8) C DO 222 k= 1,200 WRITE( io,221) 221 FORMAT(/,' ********* TERMINAL ERROR; FLUSH I/O BUFFER **********') 222 continue PAUSE STOP c RETURN END